Return to auconv.h CVS log

Up to [local] / sys / dev

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/*	$OpenBSD: auconv.h,v 1.6 2002/05/06 02:34:57 nate Exp $ */
/*	$NetBSD: auconv.h,v 1.5 1999/11/01 18:12:19 augustss Exp $	*/

/*-
 * Copyright (c) 1997 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Lennart Augustsson.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/* Convert between signed and unsigned. */
extern void change_sign8(void *, u_char *, int);
extern void change_sign16_le(void *, u_char *, int);
extern void change_sign16_be(void *, u_char *, int);
/* Convert between little and big endian. */
extern void swap_bytes(void *, u_char *, int);
extern void swap_bytes_change_sign16_le(void *, u_char *, int);
extern void swap_bytes_change_sign16_be(void *, u_char *, int);
extern void change_sign16_swap_bytes_le(void *, u_char *, int);
extern void change_sign16_swap_bytes_be(void *, u_char *, int);
/* Byte expansion/contraction */
extern void linear8_to_linear16_le(void *, u_char *, int);
extern void linear8_to_linear16_be(void *, u_char *, int);
extern void linear16_to_linear8_le(void *, u_char *, int);
extern void linear16_to_linear8_be(void *, u_char *, int);
/* Byte expansion/contraction with sign change */
extern void ulinear8_to_linear16_le(void *, u_char *, int);
extern void ulinear8_to_linear16_be(void *, u_char *, int);
extern void linear16_to_ulinear8_le(void *, u_char *, int);
extern void linear16_to_ulinear8_be(void *, u_char *, int);

/* same as above, plus converting mono to stereo */
extern void noswap_bytes_mts(void *, u_char *, int);
extern void swap_bytes_mts(void *, u_char *, int);
extern void linear8_to_linear16_le_mts(void *, u_char *, int);
extern void linear8_to_linear16_be_mts(void *, u_char *, int);
extern void ulinear8_to_linear16_le_mts(void *, u_char *, int);
extern void ulinear8_to_linear16_be_mts(void *, u_char *, int);
extern void change_sign16_le_mts(void *, u_char *, int);
extern void change_sign16_be_mts(void *, u_char *, int);
extern void change_sign16_swap_bytes_le_mts(void *, u_char *, int);
extern void change_sign16_swap_bytes_be_mts(void *, u_char *, int);

/* backwards compat for now */
#if BYTE_ORDER == LITTLE_ENDIAN
#define change_sign16 change_sign16_le
#define change_sign16_swap_bytes swap_bytes_change_sign16_le
#define swap_bytes_change_sign16 swap_bytes_change_sign16_le
#define linear8_to_linear16 linear8_to_linear16_le
#define ulinear8_to_linear16 ulinear8_to_linear16_le
#define linear8_to_linear16_mts linear8_to_linear16_le_mts
#define ulinear8_to_linear16_mts ulinear8_to_linear16_le_mts
#define change_sign16_mts change_sign16_le_mts
#define change_sign16_swap_bytes_mts change_sign16_swap_bytes_le_mts
#else
#define change_sign16 change_sign16_be
#define change_sign16_swap_bytes swap_bytes_change_sign16_be
#define swap_bytes_change_sign16 swap_bytes_change_sign16_be
#define linear8_to_linear16 linear8_to_linear16_be
#define ulinear8_to_linear16 ulinear8_to_linear16_be
#define linear8_to_linear16_mts linear8_to_linear16_be_mts
#define ulinear8_to_linear16_mts ulinear8_to_linear16_be_mts
#define change_sign16_mts change_sign16_be_mts
#define change_sign16_swap_bytes_mts change_sign16_swap_bytes_be_mts
#endif