Annotation of sys/dev/ata/atavar.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: atavar.h,v 1.18 2004/09/24 07:05:44 grange Exp $ */
2: /* $NetBSD: atavar.h,v 1.13 1999/03/10 13:11:43 bouyer Exp $ */
3:
4: /*
5: * Copyright (c) 1998, 2001 Manuel Bouyer.
6: *
7: * Redistribution and use in source and binary forms, with or without
8: * modification, are permitted provided that the following conditions
9: * are met:
10: * 1. Redistributions of source code must retain the above copyright
11: * notice, this list of conditions and the following disclaimer.
12: * 2. Redistributions in binary form must reproduce the above copyright
13: * notice, this list of conditions and the following disclaimer in the
14: * documentation and/or other materials provided with the distribution.
15: * 3. All advertising materials mentioning features or use of this software
16: * must display the following acknowledgement:
17: * This product includes software developed by Manuel Bouyer.
18: * 4. Neither the name of the University nor the names of its contributors
19: * may be used to endorse or promote products derived from this software
20: * without specific prior written permission.
21: *
22: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
24: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
25: * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
26: * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
27: * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
31: * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32: *
33: */
34:
35: #ifndef _DEV_ATA_ATAVAR_H_
36: #define _DEV_ATA_ATAVAR_H_
37:
38: /* High-level functions and structures used by both ATA and ATAPI devices */
39: #include <dev/ata/atareg.h>
40:
41: /* Datas common to drives and controller drivers */
42: struct ata_drive_datas {
43: u_int8_t drive; /* drive number */
44: int8_t ata_vers; /* ATA version supported */
45: u_int16_t drive_flags; /* bitmask for drives present/absent and cap */
46: #define DRIVE_ATA 0x0001
47: #define DRIVE_ATAPI 0x0002
48: #define DRIVE_OLD 0x0004
49: #define DRIVE (DRIVE_ATA|DRIVE_ATAPI|DRIVE_OLD)
50: #define DRIVE_CAP32 0x0008
51: #define DRIVE_DMA 0x0010
52: #define DRIVE_UDMA 0x0020
53: #define DRIVE_MODE 0x0040 /* the drive reported its mode */
54: #define DRIVE_RESET 0x0080 /* reset the drive state at next xfer */
55: #define DRIVE_DMAERR 0x0100 /* Udma transfer had crc error, don't try DMA */
56: #define DRIVE_DSCBA 0x0200 /* DSC in buffer availability mode */
57: #define DRIVE_DSCWAIT 0x0400 /* In wait for DSC to be asserted */
58: #define DRIVE_DEVICE_RESET 0x0800 /* Drive supports DEVICE RESET command */
59: #define DRIVE_SATA 0x1000 /* SATA drive */
60: /*
61: * Current setting of drive's PIO, DMA and UDMA modes.
62: * Is initialised by the disks drivers at attach time, and may be
63: * changed later by the controller's code if needed
64: */
65: u_int8_t PIO_mode; /* Current setting of drive's PIO mode */
66: u_int8_t DMA_mode; /* Current setting of drive's DMA mode */
67: u_int8_t UDMA_mode; /* Current setting of drive's UDMA mode */
68: /* Supported modes for this drive */
69: u_int8_t PIO_cap; /* supported drive's PIO mode */
70: u_int8_t DMA_cap; /* supported drive's DMA mode */
71: u_int8_t UDMA_cap; /* supported drive's UDMA mode */
72: /*
73: * Drive state. This is drive-type (ATA or ATAPI) dependant
74: * This is reset to 0 after a channel reset.
75: */
76: u_int8_t state;
77:
78: #define ACAP_LEN 0x01 /* 16 byte commands */
79: #define ACAP_DSC 0x02 /* use DSC signalling */
80: /* 0x20-0x40 reserved for ATAPI_CFG_DRQ_MASK */
81: u_int8_t atapi_cap;
82:
83: /* Keeps track of the number of resets that have occurred in a row
84: without a successful command completion. */
85: u_int8_t n_resets;
86: u_int8_t n_dmaerrs;
87: u_int32_t n_xfers;
88: #define NERRS_MAX 4
89: #define NXFER 1000
90:
91: char drive_name[31];
92: int cf_flags;
93: void *chnl_softc; /* channel softc */
94:
95: struct ataparams id;
96: };
97:
98: /* ATA/ATAPI common attachement datas */
99: struct ata_atapi_attach {
100: u_int8_t aa_type; /* Type of device */
101: #define T_ATA 0
102: #define T_ATAPI 1
103: u_int8_t aa_channel; /* controller's channel */
104: u_int8_t aa_openings; /* Number of simultaneous commands possible */
105: struct ata_drive_datas *aa_drv_data;
106: void *aa_bus_private; /* infos specifics to this bus */
107: };
108:
109: /* User config flags that force (or disable) the use of a mode */
110: #define ATA_CONFIG_PIO_MODES 0x0007
111: #define ATA_CONFIG_PIO_SET 0x0008
112: #define ATA_CONFIG_PIO_OFF 0
113: #define ATA_CONFIG_DMA_MODES 0x0070
114: #define ATA_CONFIG_DMA_SET 0x0080
115: #define ATA_CONFIG_DMA_DISABLE 0x0070
116: #define ATA_CONFIG_DMA_OFF 4
117: #define ATA_CONFIG_UDMA_MODES 0x0700
118: #define ATA_CONFIG_UDMA_SET 0x0800
119: #define ATA_CONFIG_UDMA_DISABLE 0x0700
120: #define ATA_CONFIG_UDMA_OFF 8
121:
122: /*
123: * ATA/ATAPI commands description
124: *
125: * This structure defines the interface between the ATA/ATAPI device driver
126: * and the controller for short commands. It contains the command's parameter,
127: * the len of data's to read/write (if any), and a function to call upon
128: * completion.
129: * If no sleep is allowed, the driver can poll for command completion.
130: * Once the command completed, if the error registed is valid, the flag
131: * AT_ERROR is set and the error register value is copied to r_error .
132: * A separate interface is needed for read/write or ATAPI packet commands
133: * (which need multiple interrupts per commands).
134: */
135: struct wdc_command {
136: u_int8_t r_command; /* Parameters to upload to registers */
137: u_int8_t r_head;
138: u_int16_t r_cyl;
139: u_int8_t r_sector;
140: u_int8_t r_count;
141: u_int8_t r_precomp;
142: u_int8_t r_st_bmask; /* status register mask to wait for before command */
143: u_int8_t r_st_pmask; /* status register mask to wait for after command */
144: u_int8_t r_error; /* error register after command done */
145: volatile u_int16_t flags;
146: #define AT_READ 0x0001 /* There is data to read */
147: #define AT_WRITE 0x0002 /* There is data to write (excl. with AT_READ) */
148: #define AT_WAIT 0x0008 /* wait in controller code for command completion */
149: #define AT_POLL 0x0010 /* poll for command completion (no interrupts) */
150: #define AT_DONE 0x0020 /* command is done */
151: #define AT_ERROR 0x0040 /* command is done with error */
152: #define AT_TIMEOU 0x0080 /* command timed out */
153: #define AT_DF 0x0100 /* Drive fault */
154: #define AT_READREG 0x0200 /* Read registers on completion */
155: int timeout; /* timeout (in ms) */
156: void *data; /* Data buffer address */
157: int bcount; /* number of bytes to transfer */
158: void (*callback)(void *); /* command to call once command completed */
159: void *callback_arg; /* argument passed to *callback() */
160: };
161:
162: extern int at_poll;
163:
164: int wdc_exec_command(struct ata_drive_datas *, struct wdc_command*);
165: #define WDC_COMPLETE 0x01
166: #define WDC_QUEUED 0x02
167: #define WDC_TRY_AGAIN 0x03
168:
169: void wdc_probe_caps(struct ata_drive_datas*, struct ataparams *);
170: void wdc_print_caps(struct ata_drive_datas*);
171: int wdc_downgrade_mode(struct ata_drive_datas*);
172:
173: void wdc_reset_channel(struct ata_drive_datas *);
174:
175: int wdc_ata_addref(struct ata_drive_datas *);
176: void wdc_ata_delref(struct ata_drive_datas *);
177: void wdc_ata_kill_pending(struct ata_drive_datas *);
178:
179: int ata_get_params(struct ata_drive_datas*, u_int8_t,
180: struct ataparams *);
181: int ata_set_mode(struct ata_drive_datas*, u_int8_t, u_int8_t);
182: /* return code for these cmds */
183: #define CMD_OK 0
184: #define CMD_ERR 1
185: #define CMD_AGAIN 2
186:
187: void ata_dmaerr(struct ata_drive_datas *);
188: void ata_perror(struct ata_drive_datas *, int, char *, size_t);
189:
190: #endif /* !_DEV_ATA_ATAVAR_H_ */
CVSweb