Annotation of sys/crypto/sha2.c, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: sha2.c,v 1.6 2004/05/03 02:57:36 millert Exp $ */
! 2:
! 3: /*
! 4: * FILE: sha2.c
! 5: * AUTHOR: Aaron D. Gifford <me@aarongifford.com>
! 6: *
! 7: * Copyright (c) 2000-2001, Aaron D. Gifford
! 8: * All rights reserved.
! 9: *
! 10: * Redistribution and use in source and binary forms, with or without
! 11: * modification, are permitted provided that the following conditions
! 12: * are met:
! 13: * 1. Redistributions of source code must retain the above copyright
! 14: * notice, this list of conditions and the following disclaimer.
! 15: * 2. Redistributions in binary form must reproduce the above copyright
! 16: * notice, this list of conditions and the following disclaimer in the
! 17: * documentation and/or other materials provided with the distribution.
! 18: * 3. Neither the name of the copyright holder nor the names of contributors
! 19: * may be used to endorse or promote products derived from this software
! 20: * without specific prior written permission.
! 21: *
! 22: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND
! 23: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
! 24: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
! 25: * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE
! 26: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
! 27: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
! 28: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
! 29: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
! 30: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
! 31: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
! 32: * SUCH DAMAGE.
! 33: *
! 34: * $From: sha2.c,v 1.1 2001/11/08 00:01:51 adg Exp adg $
! 35: */
! 36:
! 37: #include <sys/param.h>
! 38: #include <sys/time.h>
! 39: #include <sys/systm.h>
! 40: #include <crypto/sha2.h>
! 41:
! 42: /*
! 43: * UNROLLED TRANSFORM LOOP NOTE:
! 44: * You can define SHA2_UNROLL_TRANSFORM to use the unrolled transform
! 45: * loop version for the hash transform rounds (defined using macros
! 46: * later in this file). Either define on the command line, for example:
! 47: *
! 48: * cc -DSHA2_UNROLL_TRANSFORM -o sha2 sha2.c sha2prog.c
! 49: *
! 50: * or define below:
! 51: *
! 52: * #define SHA2_UNROLL_TRANSFORM
! 53: *
! 54: */
! 55:
! 56:
! 57: /*** SHA-256/384/512 Machine Architecture Definitions *****************/
! 58: /*
! 59: * BYTE_ORDER NOTE:
! 60: *
! 61: * Please make sure that your system defines BYTE_ORDER. If your
! 62: * architecture is little-endian, make sure it also defines
! 63: * LITTLE_ENDIAN and that the two (BYTE_ORDER and LITTLE_ENDIAN) are
! 64: * equivilent.
! 65: *
! 66: * If your system does not define the above, then you can do so by
! 67: * hand like this:
! 68: *
! 69: * #define LITTLE_ENDIAN 1234
! 70: * #define BIG_ENDIAN 4321
! 71: *
! 72: * And for little-endian machines, add:
! 73: *
! 74: * #define BYTE_ORDER LITTLE_ENDIAN
! 75: *
! 76: * Or for big-endian machines:
! 77: *
! 78: * #define BYTE_ORDER BIG_ENDIAN
! 79: *
! 80: * The FreeBSD machine this was written on defines BYTE_ORDER
! 81: * appropriately by including <sys/types.h> (which in turn includes
! 82: * <machine/endian.h> where the appropriate definitions are actually
! 83: * made).
! 84: */
! 85: #if !defined(BYTE_ORDER) || (BYTE_ORDER != LITTLE_ENDIAN && BYTE_ORDER != BIG_ENDIAN)
! 86: #error Define BYTE_ORDER to be equal to either LITTLE_ENDIAN or BIG_ENDIAN
! 87: #endif
! 88:
! 89:
! 90: /*** SHA-256/384/512 Various Length Definitions ***********************/
! 91: /* NOTE: Most of these are in sha2.h */
! 92: #define SHA256_SHORT_BLOCK_LENGTH (SHA256_BLOCK_LENGTH - 8)
! 93: #define SHA384_SHORT_BLOCK_LENGTH (SHA384_BLOCK_LENGTH - 16)
! 94: #define SHA512_SHORT_BLOCK_LENGTH (SHA512_BLOCK_LENGTH - 16)
! 95:
! 96:
! 97: /*** ENDIAN REVERSAL MACROS *******************************************/
! 98: #if BYTE_ORDER == LITTLE_ENDIAN
! 99: #define REVERSE32(w,x) { \
! 100: u_int32_t tmp = (w); \
! 101: tmp = (tmp >> 16) | (tmp << 16); \
! 102: (x) = ((tmp & 0xff00ff00UL) >> 8) | ((tmp & 0x00ff00ffUL) << 8); \
! 103: }
! 104: #define REVERSE64(w,x) { \
! 105: u_int64_t tmp = (w); \
! 106: tmp = (tmp >> 32) | (tmp << 32); \
! 107: tmp = ((tmp & 0xff00ff00ff00ff00ULL) >> 8) | \
! 108: ((tmp & 0x00ff00ff00ff00ffULL) << 8); \
! 109: (x) = ((tmp & 0xffff0000ffff0000ULL) >> 16) | \
! 110: ((tmp & 0x0000ffff0000ffffULL) << 16); \
! 111: }
! 112: #endif /* BYTE_ORDER == LITTLE_ENDIAN */
! 113:
! 114: /*
! 115: * Macro for incrementally adding the unsigned 64-bit integer n to the
! 116: * unsigned 128-bit integer (represented using a two-element array of
! 117: * 64-bit words):
! 118: */
! 119: #define ADDINC128(w,n) { \
! 120: (w)[0] += (u_int64_t)(n); \
! 121: if ((w)[0] < (n)) { \
! 122: (w)[1]++; \
! 123: } \
! 124: }
! 125:
! 126: /*** THE SIX LOGICAL FUNCTIONS ****************************************/
! 127: /*
! 128: * Bit shifting and rotation (used by the six SHA-XYZ logical functions:
! 129: *
! 130: * NOTE: The naming of R and S appears backwards here (R is a SHIFT and
! 131: * S is a ROTATION) because the SHA-256/384/512 description document
! 132: * (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this
! 133: * same "backwards" definition.
! 134: */
! 135: /* Shift-right (used in SHA-256, SHA-384, and SHA-512): */
! 136: #define R(b,x) ((x) >> (b))
! 137: /* 32-bit Rotate-right (used in SHA-256): */
! 138: #define S32(b,x) (((x) >> (b)) | ((x) << (32 - (b))))
! 139: /* 64-bit Rotate-right (used in SHA-384 and SHA-512): */
! 140: #define S64(b,x) (((x) >> (b)) | ((x) << (64 - (b))))
! 141:
! 142: /* Two of six logical functions used in SHA-256, SHA-384, and SHA-512: */
! 143: #define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z)))
! 144: #define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
! 145:
! 146: /* Four of six logical functions used in SHA-256: */
! 147: #define Sigma0_256(x) (S32(2, (x)) ^ S32(13, (x)) ^ S32(22, (x)))
! 148: #define Sigma1_256(x) (S32(6, (x)) ^ S32(11, (x)) ^ S32(25, (x)))
! 149: #define sigma0_256(x) (S32(7, (x)) ^ S32(18, (x)) ^ R(3 , (x)))
! 150: #define sigma1_256(x) (S32(17, (x)) ^ S32(19, (x)) ^ R(10, (x)))
! 151:
! 152: /* Four of six logical functions used in SHA-384 and SHA-512: */
! 153: #define Sigma0_512(x) (S64(28, (x)) ^ S64(34, (x)) ^ S64(39, (x)))
! 154: #define Sigma1_512(x) (S64(14, (x)) ^ S64(18, (x)) ^ S64(41, (x)))
! 155: #define sigma0_512(x) (S64( 1, (x)) ^ S64( 8, (x)) ^ R( 7, (x)))
! 156: #define sigma1_512(x) (S64(19, (x)) ^ S64(61, (x)) ^ R( 6, (x)))
! 157:
! 158: /*** INTERNAL FUNCTION PROTOTYPES *************************************/
! 159: /* NOTE: These should not be accessed directly from outside this
! 160: * library -- they are intended for private internal visibility/use
! 161: * only.
! 162: */
! 163: void SHA512_Last(SHA512_CTX *);
! 164: void SHA256_Transform(SHA256_CTX *, const u_int8_t *);
! 165: void SHA512_Transform(SHA512_CTX *, const u_int8_t *);
! 166:
! 167:
! 168: /*** SHA-XYZ INITIAL HASH VALUES AND CONSTANTS ************************/
! 169: /* Hash constant words K for SHA-256: */
! 170: const static u_int32_t K256[64] = {
! 171: 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL,
! 172: 0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL,
! 173: 0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL,
! 174: 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL,
! 175: 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL,
! 176: 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL,
! 177: 0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL,
! 178: 0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL,
! 179: 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL,
! 180: 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL,
! 181: 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL,
! 182: 0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL,
! 183: 0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL,
! 184: 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL,
! 185: 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL,
! 186: 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL
! 187: };
! 188:
! 189: /* Initial hash value H for SHA-256: */
! 190: const static u_int32_t sha256_initial_hash_value[8] = {
! 191: 0x6a09e667UL,
! 192: 0xbb67ae85UL,
! 193: 0x3c6ef372UL,
! 194: 0xa54ff53aUL,
! 195: 0x510e527fUL,
! 196: 0x9b05688cUL,
! 197: 0x1f83d9abUL,
! 198: 0x5be0cd19UL
! 199: };
! 200:
! 201: /* Hash constant words K for SHA-384 and SHA-512: */
! 202: const static u_int64_t K512[80] = {
! 203: 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL,
! 204: 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL,
! 205: 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL,
! 206: 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL,
! 207: 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL,
! 208: 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL,
! 209: 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL,
! 210: 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL,
! 211: 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL,
! 212: 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL,
! 213: 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL,
! 214: 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL,
! 215: 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL,
! 216: 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL,
! 217: 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL,
! 218: 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL,
! 219: 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL,
! 220: 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL,
! 221: 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL,
! 222: 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL,
! 223: 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL,
! 224: 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL,
! 225: 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL,
! 226: 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL,
! 227: 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL,
! 228: 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL,
! 229: 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL,
! 230: 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL,
! 231: 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL,
! 232: 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL,
! 233: 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL,
! 234: 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL,
! 235: 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL,
! 236: 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL,
! 237: 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL,
! 238: 0x113f9804bef90daeULL, 0x1b710b35131c471bULL,
! 239: 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL,
! 240: 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL,
! 241: 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL,
! 242: 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL
! 243: };
! 244:
! 245: /* Initial hash value H for SHA-384 */
! 246: const static u_int64_t sha384_initial_hash_value[8] = {
! 247: 0xcbbb9d5dc1059ed8ULL,
! 248: 0x629a292a367cd507ULL,
! 249: 0x9159015a3070dd17ULL,
! 250: 0x152fecd8f70e5939ULL,
! 251: 0x67332667ffc00b31ULL,
! 252: 0x8eb44a8768581511ULL,
! 253: 0xdb0c2e0d64f98fa7ULL,
! 254: 0x47b5481dbefa4fa4ULL
! 255: };
! 256:
! 257: /* Initial hash value H for SHA-512 */
! 258: const static u_int64_t sha512_initial_hash_value[8] = {
! 259: 0x6a09e667f3bcc908ULL,
! 260: 0xbb67ae8584caa73bULL,
! 261: 0x3c6ef372fe94f82bULL,
! 262: 0xa54ff53a5f1d36f1ULL,
! 263: 0x510e527fade682d1ULL,
! 264: 0x9b05688c2b3e6c1fULL,
! 265: 0x1f83d9abfb41bd6bULL,
! 266: 0x5be0cd19137e2179ULL
! 267: };
! 268:
! 269:
! 270: /*** SHA-256: *********************************************************/
! 271: void
! 272: SHA256_Init(SHA256_CTX *context)
! 273: {
! 274: if (context == NULL)
! 275: return;
! 276: bcopy(sha256_initial_hash_value, context->state, SHA256_DIGEST_LENGTH);
! 277: bzero(context->buffer, SHA256_BLOCK_LENGTH);
! 278: context->bitcount = 0;
! 279: }
! 280:
! 281: #ifdef SHA2_UNROLL_TRANSFORM
! 282:
! 283: /* Unrolled SHA-256 round macros: */
! 284:
! 285: #define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) do { \
! 286: W256[j] = (u_int32_t)data[3] | ((u_int32_t)data[2] << 8) | \
! 287: ((u_int32_t)data[1] << 16) | ((u_int32_t)data[0] << 24); \
! 288: data += 4; \
! 289: T1 = (h) + Sigma1_256((e)) + Ch((e), (f), (g)) + K256[j] + W256[j]; \
! 290: (d) += T1; \
! 291: (h) = T1 + Sigma0_256((a)) + Maj((a), (b), (c)); \
! 292: j++; \
! 293: } while(0)
! 294:
! 295: #define ROUND256(a,b,c,d,e,f,g,h) do { \
! 296: s0 = W256[(j+1)&0x0f]; \
! 297: s0 = sigma0_256(s0); \
! 298: s1 = W256[(j+14)&0x0f]; \
! 299: s1 = sigma1_256(s1); \
! 300: T1 = (h) + Sigma1_256((e)) + Ch((e), (f), (g)) + K256[j] + \
! 301: (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); \
! 302: (d) += T1; \
! 303: (h) = T1 + Sigma0_256((a)) + Maj((a), (b), (c)); \
! 304: j++; \
! 305: } while(0)
! 306:
! 307: void
! 308: SHA256_Transform(SHA256_CTX *context, const u_int8_t *data)
! 309: {
! 310: u_int32_t a, b, c, d, e, f, g, h, s0, s1;
! 311: u_int32_t T1, *W256;
! 312: int j;
! 313:
! 314: W256 = (u_int32_t *)context->buffer;
! 315:
! 316: /* Initialize registers with the prev. intermediate value */
! 317: a = context->state[0];
! 318: b = context->state[1];
! 319: c = context->state[2];
! 320: d = context->state[3];
! 321: e = context->state[4];
! 322: f = context->state[5];
! 323: g = context->state[6];
! 324: h = context->state[7];
! 325:
! 326: j = 0;
! 327: do {
! 328: /* Rounds 0 to 15 (unrolled): */
! 329: ROUND256_0_TO_15(a,b,c,d,e,f,g,h);
! 330: ROUND256_0_TO_15(h,a,b,c,d,e,f,g);
! 331: ROUND256_0_TO_15(g,h,a,b,c,d,e,f);
! 332: ROUND256_0_TO_15(f,g,h,a,b,c,d,e);
! 333: ROUND256_0_TO_15(e,f,g,h,a,b,c,d);
! 334: ROUND256_0_TO_15(d,e,f,g,h,a,b,c);
! 335: ROUND256_0_TO_15(c,d,e,f,g,h,a,b);
! 336: ROUND256_0_TO_15(b,c,d,e,f,g,h,a);
! 337: } while (j < 16);
! 338:
! 339: /* Now for the remaining rounds to 64: */
! 340: do {
! 341: ROUND256(a,b,c,d,e,f,g,h);
! 342: ROUND256(h,a,b,c,d,e,f,g);
! 343: ROUND256(g,h,a,b,c,d,e,f);
! 344: ROUND256(f,g,h,a,b,c,d,e);
! 345: ROUND256(e,f,g,h,a,b,c,d);
! 346: ROUND256(d,e,f,g,h,a,b,c);
! 347: ROUND256(c,d,e,f,g,h,a,b);
! 348: ROUND256(b,c,d,e,f,g,h,a);
! 349: } while (j < 64);
! 350:
! 351: /* Compute the current intermediate hash value */
! 352: context->state[0] += a;
! 353: context->state[1] += b;
! 354: context->state[2] += c;
! 355: context->state[3] += d;
! 356: context->state[4] += e;
! 357: context->state[5] += f;
! 358: context->state[6] += g;
! 359: context->state[7] += h;
! 360:
! 361: /* Clean up */
! 362: a = b = c = d = e = f = g = h = T1 = 0;
! 363: }
! 364:
! 365: #else /* SHA2_UNROLL_TRANSFORM */
! 366:
! 367: void
! 368: SHA256_Transform(SHA256_CTX *context, const u_int8_t *data)
! 369: {
! 370: u_int32_t a, b, c, d, e, f, g, h, s0, s1;
! 371: u_int32_t T1, T2, *W256;
! 372: int j;
! 373:
! 374: W256 = (u_int32_t *)context->buffer;
! 375:
! 376: /* Initialize registers with the prev. intermediate value */
! 377: a = context->state[0];
! 378: b = context->state[1];
! 379: c = context->state[2];
! 380: d = context->state[3];
! 381: e = context->state[4];
! 382: f = context->state[5];
! 383: g = context->state[6];
! 384: h = context->state[7];
! 385:
! 386: j = 0;
! 387: do {
! 388: W256[j] = (u_int32_t)data[3] | ((u_int32_t)data[2] << 8) |
! 389: ((u_int32_t)data[1] << 16) | ((u_int32_t)data[0] << 24);
! 390: data += 4;
! 391: /* Apply the SHA-256 compression function to update a..h */
! 392: T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + W256[j];
! 393: T2 = Sigma0_256(a) + Maj(a, b, c);
! 394: h = g;
! 395: g = f;
! 396: f = e;
! 397: e = d + T1;
! 398: d = c;
! 399: c = b;
! 400: b = a;
! 401: a = T1 + T2;
! 402:
! 403: j++;
! 404: } while (j < 16);
! 405:
! 406: do {
! 407: /* Part of the message block expansion: */
! 408: s0 = W256[(j+1)&0x0f];
! 409: s0 = sigma0_256(s0);
! 410: s1 = W256[(j+14)&0x0f];
! 411: s1 = sigma1_256(s1);
! 412:
! 413: /* Apply the SHA-256 compression function to update a..h */
! 414: T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] +
! 415: (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0);
! 416: T2 = Sigma0_256(a) + Maj(a, b, c);
! 417: h = g;
! 418: g = f;
! 419: f = e;
! 420: e = d + T1;
! 421: d = c;
! 422: c = b;
! 423: b = a;
! 424: a = T1 + T2;
! 425:
! 426: j++;
! 427: } while (j < 64);
! 428:
! 429: /* Compute the current intermediate hash value */
! 430: context->state[0] += a;
! 431: context->state[1] += b;
! 432: context->state[2] += c;
! 433: context->state[3] += d;
! 434: context->state[4] += e;
! 435: context->state[5] += f;
! 436: context->state[6] += g;
! 437: context->state[7] += h;
! 438:
! 439: /* Clean up */
! 440: a = b = c = d = e = f = g = h = T1 = T2 = 0;
! 441: }
! 442:
! 443: #endif /* SHA2_UNROLL_TRANSFORM */
! 444:
! 445: void
! 446: SHA256_Update(SHA256_CTX *context, const u_int8_t *data, size_t len)
! 447: {
! 448: size_t freespace, usedspace;
! 449:
! 450: /* Calling with no data is valid (we do nothing) */
! 451: if (len == 0)
! 452: return;
! 453:
! 454: usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
! 455: if (usedspace > 0) {
! 456: /* Calculate how much free space is available in the buffer */
! 457: freespace = SHA256_BLOCK_LENGTH - usedspace;
! 458:
! 459: if (len >= freespace) {
! 460: /* Fill the buffer completely and process it */
! 461: bcopy(data, &context->buffer[usedspace], freespace);
! 462: context->bitcount += freespace << 3;
! 463: len -= freespace;
! 464: data += freespace;
! 465: SHA256_Transform(context, context->buffer);
! 466: } else {
! 467: /* The buffer is not yet full */
! 468: bcopy(data, &context->buffer[usedspace], len);
! 469: context->bitcount += len << 3;
! 470: /* Clean up: */
! 471: usedspace = freespace = 0;
! 472: return;
! 473: }
! 474: }
! 475: while (len >= SHA256_BLOCK_LENGTH) {
! 476: /* Process as many complete blocks as we can */
! 477: SHA256_Transform(context, data);
! 478: context->bitcount += SHA256_BLOCK_LENGTH << 3;
! 479: len -= SHA256_BLOCK_LENGTH;
! 480: data += SHA256_BLOCK_LENGTH;
! 481: }
! 482: if (len > 0) {
! 483: /* There's left-overs, so save 'em */
! 484: bcopy(data, context->buffer, len);
! 485: context->bitcount += len << 3;
! 486: }
! 487: /* Clean up: */
! 488: usedspace = freespace = 0;
! 489: }
! 490:
! 491: void
! 492: SHA256_Final(u_int8_t digest[], SHA256_CTX *context)
! 493: {
! 494: u_int32_t *d = (u_int32_t *)digest;
! 495: unsigned int usedspace;
! 496:
! 497: /* If no digest buffer is passed, we don't bother doing this: */
! 498: if (digest != NULL) {
! 499: usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH;
! 500: #if BYTE_ORDER == LITTLE_ENDIAN
! 501: /* Convert FROM host byte order */
! 502: REVERSE64(context->bitcount,context->bitcount);
! 503: #endif
! 504: if (usedspace > 0) {
! 505: /* Begin padding with a 1 bit: */
! 506: context->buffer[usedspace++] = 0x80;
! 507:
! 508: if (usedspace <= SHA256_SHORT_BLOCK_LENGTH) {
! 509: /* Set-up for the last transform: */
! 510: bzero(&context->buffer[usedspace], SHA256_SHORT_BLOCK_LENGTH - usedspace);
! 511: } else {
! 512: if (usedspace < SHA256_BLOCK_LENGTH) {
! 513: bzero(&context->buffer[usedspace], SHA256_BLOCK_LENGTH - usedspace);
! 514: }
! 515: /* Do second-to-last transform: */
! 516: SHA256_Transform(context, context->buffer);
! 517:
! 518: /* And set-up for the last transform: */
! 519: bzero(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
! 520: }
! 521: } else {
! 522: /* Set-up for the last transform: */
! 523: bzero(context->buffer, SHA256_SHORT_BLOCK_LENGTH);
! 524:
! 525: /* Begin padding with a 1 bit: */
! 526: *context->buffer = 0x80;
! 527: }
! 528: /* Set the bit count: */
! 529: *(u_int64_t *)&context->buffer[SHA256_SHORT_BLOCK_LENGTH] = context->bitcount;
! 530:
! 531: /* Final transform: */
! 532: SHA256_Transform(context, context->buffer);
! 533:
! 534: #if BYTE_ORDER == LITTLE_ENDIAN
! 535: {
! 536: /* Convert TO host byte order */
! 537: int j;
! 538: for (j = 0; j < 8; j++) {
! 539: REVERSE32(context->state[j],context->state[j]);
! 540: *d++ = context->state[j];
! 541: }
! 542: }
! 543: #else
! 544: bcopy(context->state, d, SHA256_DIGEST_LENGTH);
! 545: #endif
! 546: }
! 547:
! 548: /* Clean up state data: */
! 549: bzero(context, sizeof(*context));
! 550: usedspace = 0;
! 551: }
! 552:
! 553:
! 554: /*** SHA-512: *********************************************************/
! 555: void
! 556: SHA512_Init(SHA512_CTX *context)
! 557: {
! 558: if (context == NULL)
! 559: return;
! 560: bcopy(sha512_initial_hash_value, context->state, SHA512_DIGEST_LENGTH);
! 561: bzero(context->buffer, SHA512_BLOCK_LENGTH);
! 562: context->bitcount[0] = context->bitcount[1] = 0;
! 563: }
! 564:
! 565: #ifdef SHA2_UNROLL_TRANSFORM
! 566:
! 567: /* Unrolled SHA-512 round macros: */
! 568:
! 569: #define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) do { \
! 570: W512[j] = (u_int64_t)data[7] | ((u_int64_t)data[6] << 8) | \
! 571: ((u_int64_t)data[5] << 16) | ((u_int64_t)data[4] << 24) | \
! 572: ((u_int64_t)data[3] << 32) | ((u_int64_t)data[2] << 40) | \
! 573: ((u_int64_t)data[1] << 48) | ((u_int64_t)data[0] << 56); \
! 574: data += 8; \
! 575: T1 = (h) + Sigma1_512((e)) + Ch((e), (f), (g)) + K512[j] + W512[j]; \
! 576: (d) += T1; \
! 577: (h) = T1 + Sigma0_512((a)) + Maj((a), (b), (c)); \
! 578: j++; \
! 579: } while(0)
! 580:
! 581:
! 582: #define ROUND512(a,b,c,d,e,f,g,h) do { \
! 583: s0 = W512[(j+1)&0x0f]; \
! 584: s0 = sigma0_512(s0); \
! 585: s1 = W512[(j+14)&0x0f]; \
! 586: s1 = sigma1_512(s1); \
! 587: T1 = (h) + Sigma1_512((e)) + Ch((e), (f), (g)) + K512[j] + \
! 588: (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); \
! 589: (d) += T1; \
! 590: (h) = T1 + Sigma0_512((a)) + Maj((a), (b), (c)); \
! 591: j++; \
! 592: } while(0)
! 593:
! 594: void
! 595: SHA512_Transform(SHA512_CTX *context, const u_int8_t *data)
! 596: {
! 597: u_int64_t a, b, c, d, e, f, g, h, s0, s1;
! 598: u_int64_t T1, *W512 = (u_int64_t *)context->buffer;
! 599: int j;
! 600:
! 601: /* Initialize registers with the prev. intermediate value */
! 602: a = context->state[0];
! 603: b = context->state[1];
! 604: c = context->state[2];
! 605: d = context->state[3];
! 606: e = context->state[4];
! 607: f = context->state[5];
! 608: g = context->state[6];
! 609: h = context->state[7];
! 610:
! 611: j = 0;
! 612: do {
! 613: ROUND512_0_TO_15(a,b,c,d,e,f,g,h);
! 614: ROUND512_0_TO_15(h,a,b,c,d,e,f,g);
! 615: ROUND512_0_TO_15(g,h,a,b,c,d,e,f);
! 616: ROUND512_0_TO_15(f,g,h,a,b,c,d,e);
! 617: ROUND512_0_TO_15(e,f,g,h,a,b,c,d);
! 618: ROUND512_0_TO_15(d,e,f,g,h,a,b,c);
! 619: ROUND512_0_TO_15(c,d,e,f,g,h,a,b);
! 620: ROUND512_0_TO_15(b,c,d,e,f,g,h,a);
! 621: } while (j < 16);
! 622:
! 623: /* Now for the remaining rounds up to 79: */
! 624: do {
! 625: ROUND512(a,b,c,d,e,f,g,h);
! 626: ROUND512(h,a,b,c,d,e,f,g);
! 627: ROUND512(g,h,a,b,c,d,e,f);
! 628: ROUND512(f,g,h,a,b,c,d,e);
! 629: ROUND512(e,f,g,h,a,b,c,d);
! 630: ROUND512(d,e,f,g,h,a,b,c);
! 631: ROUND512(c,d,e,f,g,h,a,b);
! 632: ROUND512(b,c,d,e,f,g,h,a);
! 633: } while (j < 80);
! 634:
! 635: /* Compute the current intermediate hash value */
! 636: context->state[0] += a;
! 637: context->state[1] += b;
! 638: context->state[2] += c;
! 639: context->state[3] += d;
! 640: context->state[4] += e;
! 641: context->state[5] += f;
! 642: context->state[6] += g;
! 643: context->state[7] += h;
! 644:
! 645: /* Clean up */
! 646: a = b = c = d = e = f = g = h = T1 = 0;
! 647: }
! 648:
! 649: #else /* SHA2_UNROLL_TRANSFORM */
! 650:
! 651: void
! 652: SHA512_Transform(SHA512_CTX *context, const u_int8_t *data)
! 653: {
! 654: u_int64_t a, b, c, d, e, f, g, h, s0, s1;
! 655: u_int64_t T1, T2, *W512 = (u_int64_t *)context->buffer;
! 656: int j;
! 657:
! 658: /* Initialize registers with the prev. intermediate value */
! 659: a = context->state[0];
! 660: b = context->state[1];
! 661: c = context->state[2];
! 662: d = context->state[3];
! 663: e = context->state[4];
! 664: f = context->state[5];
! 665: g = context->state[6];
! 666: h = context->state[7];
! 667:
! 668: j = 0;
! 669: do {
! 670: W512[j] = (u_int64_t)data[7] | ((u_int64_t)data[6] << 8) |
! 671: ((u_int64_t)data[5] << 16) | ((u_int64_t)data[4] << 24) |
! 672: ((u_int64_t)data[3] << 32) | ((u_int64_t)data[2] << 40) |
! 673: ((u_int64_t)data[1] << 48) | ((u_int64_t)data[0] << 56);
! 674: data += 8;
! 675: /* Apply the SHA-512 compression function to update a..h */
! 676: T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + W512[j];
! 677: T2 = Sigma0_512(a) + Maj(a, b, c);
! 678: h = g;
! 679: g = f;
! 680: f = e;
! 681: e = d + T1;
! 682: d = c;
! 683: c = b;
! 684: b = a;
! 685: a = T1 + T2;
! 686:
! 687: j++;
! 688: } while (j < 16);
! 689:
! 690: do {
! 691: /* Part of the message block expansion: */
! 692: s0 = W512[(j+1)&0x0f];
! 693: s0 = sigma0_512(s0);
! 694: s1 = W512[(j+14)&0x0f];
! 695: s1 = sigma1_512(s1);
! 696:
! 697: /* Apply the SHA-512 compression function to update a..h */
! 698: T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] +
! 699: (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0);
! 700: T2 = Sigma0_512(a) + Maj(a, b, c);
! 701: h = g;
! 702: g = f;
! 703: f = e;
! 704: e = d + T1;
! 705: d = c;
! 706: c = b;
! 707: b = a;
! 708: a = T1 + T2;
! 709:
! 710: j++;
! 711: } while (j < 80);
! 712:
! 713: /* Compute the current intermediate hash value */
! 714: context->state[0] += a;
! 715: context->state[1] += b;
! 716: context->state[2] += c;
! 717: context->state[3] += d;
! 718: context->state[4] += e;
! 719: context->state[5] += f;
! 720: context->state[6] += g;
! 721: context->state[7] += h;
! 722:
! 723: /* Clean up */
! 724: a = b = c = d = e = f = g = h = T1 = T2 = 0;
! 725: }
! 726:
! 727: #endif /* SHA2_UNROLL_TRANSFORM */
! 728:
! 729: void
! 730: SHA512_Update(SHA512_CTX *context, const u_int8_t *data, size_t len)
! 731: {
! 732: size_t freespace, usedspace;
! 733:
! 734: /* Calling with no data is valid (we do nothing) */
! 735: if (len == 0)
! 736: return;
! 737:
! 738: usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
! 739: if (usedspace > 0) {
! 740: /* Calculate how much free space is available in the buffer */
! 741: freespace = SHA512_BLOCK_LENGTH - usedspace;
! 742:
! 743: if (len >= freespace) {
! 744: /* Fill the buffer completely and process it */
! 745: bcopy(data, &context->buffer[usedspace], freespace);
! 746: ADDINC128(context->bitcount, freespace << 3);
! 747: len -= freespace;
! 748: data += freespace;
! 749: SHA512_Transform(context, context->buffer);
! 750: } else {
! 751: /* The buffer is not yet full */
! 752: bcopy(data, &context->buffer[usedspace], len);
! 753: ADDINC128(context->bitcount, len << 3);
! 754: /* Clean up: */
! 755: usedspace = freespace = 0;
! 756: return;
! 757: }
! 758: }
! 759: while (len >= SHA512_BLOCK_LENGTH) {
! 760: /* Process as many complete blocks as we can */
! 761: SHA512_Transform(context, data);
! 762: ADDINC128(context->bitcount, SHA512_BLOCK_LENGTH << 3);
! 763: len -= SHA512_BLOCK_LENGTH;
! 764: data += SHA512_BLOCK_LENGTH;
! 765: }
! 766: if (len > 0) {
! 767: /* There's left-overs, so save 'em */
! 768: bcopy(data, context->buffer, len);
! 769: ADDINC128(context->bitcount, len << 3);
! 770: }
! 771: /* Clean up: */
! 772: usedspace = freespace = 0;
! 773: }
! 774:
! 775: void
! 776: SHA512_Last(SHA512_CTX *context)
! 777: {
! 778: unsigned int usedspace;
! 779:
! 780: usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH;
! 781: #if BYTE_ORDER == LITTLE_ENDIAN
! 782: /* Convert FROM host byte order */
! 783: REVERSE64(context->bitcount[0],context->bitcount[0]);
! 784: REVERSE64(context->bitcount[1],context->bitcount[1]);
! 785: #endif
! 786: if (usedspace > 0) {
! 787: /* Begin padding with a 1 bit: */
! 788: context->buffer[usedspace++] = 0x80;
! 789:
! 790: if (usedspace <= SHA512_SHORT_BLOCK_LENGTH) {
! 791: /* Set-up for the last transform: */
! 792: bzero(&context->buffer[usedspace], SHA512_SHORT_BLOCK_LENGTH - usedspace);
! 793: } else {
! 794: if (usedspace < SHA512_BLOCK_LENGTH) {
! 795: bzero(&context->buffer[usedspace], SHA512_BLOCK_LENGTH - usedspace);
! 796: }
! 797: /* Do second-to-last transform: */
! 798: SHA512_Transform(context, context->buffer);
! 799:
! 800: /* And set-up for the last transform: */
! 801: bzero(context->buffer, SHA512_BLOCK_LENGTH - 2);
! 802: }
! 803: } else {
! 804: /* Prepare for final transform: */
! 805: bzero(context->buffer, SHA512_SHORT_BLOCK_LENGTH);
! 806:
! 807: /* Begin padding with a 1 bit: */
! 808: *context->buffer = 0x80;
! 809: }
! 810: /* Store the length of input data (in bits): */
! 811: *(u_int64_t *)&context->buffer[SHA512_SHORT_BLOCK_LENGTH] = context->bitcount[1];
! 812: *(u_int64_t *)&context->buffer[SHA512_SHORT_BLOCK_LENGTH+8] = context->bitcount[0];
! 813:
! 814: /* Final transform: */
! 815: SHA512_Transform(context, context->buffer);
! 816: }
! 817:
! 818: void
! 819: SHA512_Final(u_int8_t digest[], SHA512_CTX *context)
! 820: {
! 821: u_int64_t *d = (u_int64_t *)digest;
! 822:
! 823: /* If no digest buffer is passed, we don't bother doing this: */
! 824: if (digest != NULL) {
! 825: SHA512_Last(context);
! 826:
! 827: /* Save the hash data for output: */
! 828: #if BYTE_ORDER == LITTLE_ENDIAN
! 829: {
! 830: /* Convert TO host byte order */
! 831: int j;
! 832: for (j = 0; j < 8; j++) {
! 833: REVERSE64(context->state[j],context->state[j]);
! 834: *d++ = context->state[j];
! 835: }
! 836: }
! 837: #else
! 838: bcopy(context->state, d, SHA512_DIGEST_LENGTH);
! 839: #endif
! 840: }
! 841:
! 842: /* Zero out state data */
! 843: bzero(context, sizeof(*context));
! 844: }
! 845:
! 846:
! 847: /*** SHA-384: *********************************************************/
! 848: void
! 849: SHA384_Init(SHA384_CTX *context)
! 850: {
! 851: if (context == NULL)
! 852: return;
! 853: bcopy(sha384_initial_hash_value, context->state, SHA512_DIGEST_LENGTH);
! 854: bzero(context->buffer, SHA384_BLOCK_LENGTH);
! 855: context->bitcount[0] = context->bitcount[1] = 0;
! 856: }
! 857:
! 858: void
! 859: SHA384_Update(SHA384_CTX *context, const u_int8_t *data, size_t len)
! 860: {
! 861: SHA512_Update((SHA512_CTX *)context, data, len);
! 862: }
! 863:
! 864: void
! 865: SHA384_Final(u_int8_t digest[], SHA384_CTX *context)
! 866: {
! 867: u_int64_t *d = (u_int64_t *)digest;
! 868:
! 869: /* If no digest buffer is passed, we don't bother doing this: */
! 870: if (digest != NULL) {
! 871: SHA512_Last((SHA512_CTX *)context);
! 872:
! 873: /* Save the hash data for output: */
! 874: #if BYTE_ORDER == LITTLE_ENDIAN
! 875: {
! 876: /* Convert TO host byte order */
! 877: int j;
! 878: for (j = 0; j < 6; j++) {
! 879: REVERSE64(context->state[j],context->state[j]);
! 880: *d++ = context->state[j];
! 881: }
! 882: }
! 883: #else
! 884: bcopy(context->state, d, SHA384_DIGEST_LENGTH);
! 885: #endif
! 886: }
! 887:
! 888: /* Zero out state data */
! 889: bzero(context, sizeof(*context));
! 890: }
CVSweb