Return to osf1_prot.c CVS log

Up to [local] / sys / compat / osf1

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/* $OpenBSD: osf1_prot.c,v 1.3 2007/03/15 10:22:30 art Exp $ */
/* $NetBSD: osf1_prot.c,v 1.2 1999/05/05 01:51:35 cgd Exp $ */

/*
 * Copyright (c) 1999 Christopher G. Demetriou.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Christopher G. Demetriou
 *	for the NetBSD Project.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Copyright (c) 1994, 1995 Carnegie-Mellon University.
 * All rights reserved.
 *
 * Author: Chris G. Demetriou
 * 
 * Permission to use, copy, modify and distribute this software and
 * its documentation is hereby granted, provided that both the copyright
 * notice and this permission notice appear in all copies of the
 * software, derivative works or modified versions, and any portions
 * thereof, and that both notices appear in supporting documentation.
 * 
 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 
 * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND 
 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
 * 
 * Carnegie Mellon requests users of this software to return to
 *
 *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
 *  School of Computer Science
 *  Carnegie Mellon University
 *  Pittsburgh PA 15213-3890
 *
 * any improvements or extensions that they make and grant Carnegie the
 * rights to redistribute these changes.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/mount.h>
#include <sys/syscallargs.h>

#include <compat/osf1/osf1.h>
#include <compat/osf1/osf1_syscallargs.h>
#include <compat/osf1/osf1_cvt.h>

/*
 * OSF/1 defines _POSIX_SAVED_IDS, which means that our normal
 * setgid() won't work.
 *
 * If you change "uid" to "gid" in the discussion, below, about
 * setuid(), you'll get a correct description of setgid().
 */
int
osf1_sys_setgid(p, v, retval)
	struct proc *p;
	void *v;
	register_t *retval;
{
	struct osf1_sys_setgid_args *uap = v;
	struct pcred *pc = p->p_cred;
	gid_t gid = SCARG(uap, gid);
	int error;

	if ((error = suser(p, 0)) != 0 &&
	    gid != pc->p_rgid && gid != pc->p_svgid)
		return (error);

	pc->pc_ucred = crcopy(pc->pc_ucred);
	pc->pc_ucred->cr_gid = gid;
	if (error == 0) {
		pc->p_rgid = gid;
		pc->p_svgid = gid;
	}
	atomic_setbits_int(&p->p_flag, P_SUGID);
	return (0);
}

/*
 * OSF/1 defines _POSIX_SAVED_IDS, which means that our normal
 * setuid() won't work.
 *
 * Instead, by P1003.1b-1993, setuid() is supposed to work like:
 *	If the process has appropriate [super-user] privileges, the
 *	    setuid() function sets the real user ID, effective user
 *	    ID, and the saved set-user-ID to uid.
 *	If the process does not have appropriate privileges, but uid
 *	    is equal to the real user ID or the saved set-user-ID, the
 *	    setuid() function sets the effective user ID to uid; the
 *	    real user ID and saved set-user-ID remain unchanged by
 *	    this function call.
 */
int
osf1_sys_setuid(p, v, retval)
	struct proc *p;
	void *v;
	register_t *retval;
{
	struct osf1_sys_setuid_args *uap = v;
	struct pcred *pc = p->p_cred;
	uid_t uid = SCARG(uap, uid);
	int error;

	if ((error = suser(p, 0)) != 0 &&
	    uid != pc->p_ruid && uid != pc->p_svuid)
		return (error);

	pc->pc_ucred = crcopy(pc->pc_ucred);
	pc->pc_ucred->cr_uid = uid;
	if (error == 0) {
	        (void)chgproccnt(pc->p_ruid, -1);
	        (void)chgproccnt(uid, 1);
		pc->p_ruid = uid;
		pc->p_svuid = uid;
	}
	atomic_setbits_int(&p->p_flag, P_SUGID);
	return (0);
}