Annotation of sys/arch/vax/qbus/dz.c, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: dz.c,v 1.14 2006/08/05 16:58:47 miod Exp $ */
2: /* $NetBSD: dz.c,v 1.23 2000/06/04 02:14:12 matt Exp $ */
3: /*
4: * Copyright (c) 1996 Ken C. Wellsch. All rights reserved.
5: * Copyright (c) 1992, 1993
6: * The Regents of the University of California. All rights reserved.
7: *
8: * This code is derived from software contributed to Berkeley by
9: * Ralph Campbell and Rick Macklem.
10: *
11: * Redistribution and use in source and binary forms, with or without
12: * modification, are permitted provided that the following conditions
13: * are met:
14: * 1. Redistributions of source code must retain the above copyright
15: * notice, this list of conditions and the following disclaimer.
16: * 2. Redistributions in binary form must reproduce the above copyright
17: * notice, this list of conditions and the following disclaimer in the
18: * documentation and/or other materials provided with the distribution.
19: * 3. Neither the name of the University nor the names of its contributors
20: * may be used to endorse or promote products derived from this software
21: * without specific prior written permission.
22: *
23: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33: * SUCH DAMAGE.
34: */
35:
36: #include <sys/param.h>
37: #include <sys/systm.h>
38: #include <sys/ioctl.h>
39: #include <sys/tty.h>
40: #include <sys/proc.h>
41: #include <sys/buf.h>
42: #include <sys/conf.h>
43: #include <sys/file.h>
44: #include <sys/uio.h>
45: #include <sys/kernel.h>
46: #include <sys/syslog.h>
47: #include <sys/device.h>
48: #include <sys/timeout.h>
49:
50: #ifdef DDB
51: #include <dev/cons.h>
52: #endif
53:
54: #include <machine/bus.h>
55: #include <machine/pte.h>
56: #include <machine/trap.h>
57: #include <machine/cpu.h>
58:
59: #include <arch/vax/qbus/dzreg.h>
60: #include <arch/vax/qbus/dzvar.h>
61:
62: #define DZ_READ_BYTE(adr) \
63: bus_space_read_1(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr)
64: #define DZ_READ_WORD(adr) \
65: bus_space_read_2(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr)
66: #define DZ_WRITE_BYTE(adr, val) \
67: bus_space_write_1(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr, val)
68: #define DZ_WRITE_WORD(adr, val) \
69: bus_space_write_2(sc->sc_iot, sc->sc_ioh, sc->sc_dr.adr, val)
70:
71:
72: /* Flags used to monitor modem bits, make them understood outside driver */
73:
74: #define DML_DTR TIOCM_DTR
75: #define DML_DCD TIOCM_CD
76: #define DML_RI TIOCM_RI
77: #define DML_BRK 0100000 /* no equivalent, we will mask */
78:
79: static const struct speedtab dzspeedtab[] =
80: {
81: { 0, 0 },
82: { 50, DZ_LPR_B50 },
83: { 75, DZ_LPR_B75 },
84: { 110, DZ_LPR_B110 },
85: { 134, DZ_LPR_B134 },
86: { 150, DZ_LPR_B150 },
87: { 300, DZ_LPR_B300 },
88: { 600, DZ_LPR_B600 },
89: { 1200, DZ_LPR_B1200 },
90: { 1800, DZ_LPR_B1800 },
91: { 2000, DZ_LPR_B2000 },
92: { 2400, DZ_LPR_B2400 },
93: { 3600, DZ_LPR_B3600 },
94: { 4800, DZ_LPR_B4800 },
95: { 7200, DZ_LPR_B7200 },
96: { 9600, DZ_LPR_B9600 },
97: { 19200, DZ_LPR_B19200 },
98: { -1, -1 }
99: };
100:
101: static void dzstart(struct tty *);
102: static int dzparam(struct tty *, struct termios *);
103: static unsigned dzmctl(struct dz_softc *, int, int, int);
104: static void dzscan(void *);
105: static void dzdrain(struct dz_softc *);
106:
107: struct cfdriver dz_cd = {
108: NULL, "dz", DV_TTY
109: };
110:
111: cdev_decl(dz);
112:
113: /*
114: * The DZ series doesn't interrupt on carrier transitions,
115: * so we have to use a timer to watch it.
116: */
117: int dz_timer = 0; /* true if timer started */
118:
119: struct timeout dz_timeout;
120:
121: void
122: dzattach(struct dz_softc *sc)
123: {
124: int n;
125:
126: sc->sc_rxint = sc->sc_brk = 0;
127:
128: sc->sc_dr.dr_tcrw = sc->sc_dr.dr_tcr;
129: DZ_WRITE_WORD(dr_csr, DZ_CSR_MSE | DZ_CSR_RXIE | DZ_CSR_TXIE);
130: dzdrain(sc);
131: DZ_WRITE_BYTE(dr_dtr, 0);
132: DZ_WRITE_BYTE(dr_break, 0);
133:
134: /* Initialize our softc structure. Should be done in open? */
135:
136: for (n = 0; n < sc->sc_type; n++) {
137: sc->sc_dz[n].dz_sc = sc;
138: sc->sc_dz[n].dz_line = n;
139: sc->sc_dz[n].dz_tty = ttymalloc();
140: }
141:
142: /* Alas no interrupt on modem bit changes, so we manually scan */
143:
144: if (dz_timer == 0) {
145: dz_timer = 1;
146: timeout_set(&dz_timeout, dzscan, NULL);
147: timeout_add(&dz_timeout, hz);
148: }
149: printf("\n");
150: }
151:
152: /* Receiver Interrupt */
153:
154: void
155: dzrint(void *arg)
156: {
157: struct dz_softc *sc = arg;
158: struct tty *tp;
159: int cc, line;
160: unsigned c;
161: int overrun = 0;
162:
163: sc->sc_rxint++;
164:
165: while ((c = DZ_READ_WORD(dr_rbuf)) & DZ_RBUF_DATA_VALID) {
166: cc = c & 0xFF;
167: line = DZ_PORT(c>>8);
168: tp = sc->sc_dz[line].dz_tty;
169:
170: /* Must be caught early */
171: if (sc->sc_dz[line].dz_catch &&
172: (*sc->sc_dz[line].dz_catch)(sc->sc_dz[line].dz_private, cc))
173: continue;
174:
175: if (!(tp->t_state & TS_ISOPEN)) {
176: wakeup((caddr_t)&tp->t_rawq);
177: continue;
178: }
179:
180: if ((c & DZ_RBUF_OVERRUN_ERR) && overrun == 0) {
181: log(LOG_WARNING, "%s: silo overflow, line %d\n",
182: sc->sc_dev.dv_xname, line);
183: overrun = 1;
184: }
185:
186: /* A BREAK key will appear as a NULL with a framing error */
187: if (c & DZ_RBUF_FRAMING_ERR)
188: cc |= TTY_FE;
189: if (c & DZ_RBUF_PARITY_ERR)
190: cc |= TTY_PE;
191:
192: #if defined(DDB) && (defined(VAX410) || defined(VAX43) || defined(VAX46) || defined(VAX48) || defined(VAX49) || defined(VAX53))
193: if (tp->t_dev == cn_tab->cn_dev) {
194: int j = kdbrint(cc);
195:
196: if (j == 1) /* Escape received, just return */
197: continue;
198:
199: if (j == 2) /* Second char wasn't 'D' */
200: (*linesw[tp->t_line].l_rint)(27, tp);
201: }
202: #endif
203: (*linesw[tp->t_line].l_rint)(cc, tp);
204: }
205: }
206:
207: /* Transmitter Interrupt */
208:
209: void
210: dzxint(void *arg)
211: {
212: struct dz_softc *sc = arg;
213: struct tty *tp;
214: struct clist *cl;
215: int line, ch, csr;
216: u_char tcr;
217:
218: /*
219: * Switch to POLLED mode.
220: * Some simple measurements indicated that even on
221: * one port, by freeing the scanner in the controller
222: * by either providing a character or turning off
223: * the port when output is complete, the transmitter
224: * was ready to accept more output when polled again.
225: * With just two ports running the game "worms,"
226: * almost every interrupt serviced both transmitters!
227: * Each UART is double buffered, so if the scanner
228: * is quick enough and timing works out, we can even
229: * feed the same port twice.
230: *
231: * Ragge 980517:
232: * Do not need to turn off interrupts, already at interrupt level.
233: * Remove the pdma stuff; no great need of it right now.
234: */
235:
236: while (((csr = DZ_READ_WORD(dr_csr)) & DZ_CSR_TX_READY) != 0) {
237:
238: line = DZ_PORT(csr>>8);
239:
240: tp = sc->sc_dz[line].dz_tty;
241: cl = &tp->t_outq;
242: tp->t_state &= ~TS_BUSY;
243:
244: /* Just send out a char if we have one */
245: /* As long as we can fill the chip buffer, we just loop here */
246: if (cl->c_cc) {
247: tp->t_state |= TS_BUSY;
248: ch = getc(cl);
249: DZ_WRITE_BYTE(dr_tbuf, ch);
250: continue;
251: }
252: /* Nothing to send; clear the scan bit */
253: /* Clear xmit scanner bit; dzstart may set it again */
254: tcr = DZ_READ_WORD(dr_tcrw);
255: tcr &= 255;
256: tcr &= ~(1 << line);
257: DZ_WRITE_BYTE(dr_tcr, tcr);
258: if (sc->sc_dz[line].dz_catch)
259: continue;
260:
261: if (tp->t_state & TS_FLUSH)
262: tp->t_state &= ~TS_FLUSH;
263: else
264: ndflush (&tp->t_outq, cl->c_cc);
265:
266: if (tp->t_line)
267: (*linesw[tp->t_line].l_start)(tp);
268: else
269: dzstart(tp);
270: }
271: }
272:
273: int
274: dzopen(dev_t dev, int flag, int mode, struct proc *p)
275: {
276: struct tty *tp;
277: int unit, line;
278: struct dz_softc *sc;
279: int s, error = 0;
280:
281: unit = DZ_I2C(minor(dev));
282: line = DZ_PORT(minor(dev));
283: if (unit >= dz_cd.cd_ndevs || dz_cd.cd_devs[unit] == NULL)
284: return (ENXIO);
285:
286: sc = dz_cd.cd_devs[unit];
287:
288: if (line >= sc->sc_type)
289: return ENXIO;
290:
291: /* if some other device is using the line, it's not available */
292: if (sc->sc_dz[line].dz_catch)
293: return ENXIO;
294:
295: if (sc->sc_openings++ == 0)
296: dzdrain(sc);
297:
298: tp = sc->sc_dz[line].dz_tty;
299: if (tp == NULL)
300: return (ENODEV);
301: tp->t_oproc = dzstart;
302: tp->t_param = dzparam;
303: tp->t_dev = dev;
304: if ((tp->t_state & TS_ISOPEN) == 0) {
305: ttychars(tp);
306: if (tp->t_ispeed == 0) {
307: tp->t_iflag = TTYDEF_IFLAG;
308: tp->t_oflag = TTYDEF_OFLAG;
309: tp->t_cflag = TTYDEF_CFLAG;
310: tp->t_lflag = TTYDEF_LFLAG;
311: tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
312: }
313: (void) dzparam(tp, &tp->t_termios);
314: ttsetwater(tp);
315: } else if ((tp->t_state & TS_XCLUDE) && p->p_ucred->cr_uid != 0)
316: return (EBUSY);
317: /* Use DMBIS and *not* DMSET or else we clobber incoming bits */
318: if (dzmctl(sc, line, DML_DTR, DMBIS) & DML_DCD)
319: tp->t_state |= TS_CARR_ON;
320: s = spltty();
321: while (!(flag & O_NONBLOCK) && !(tp->t_cflag & CLOCAL) &&
322: !(tp->t_state & TS_CARR_ON)) {
323: error = ttysleep(tp, (caddr_t)&tp->t_rawq,
324: TTIPRI | PCATCH, ttopen, 0);
325: if (error)
326: break;
327: }
328: splx(s);
329: if (error)
330: return (error);
331: return ((*linesw[tp->t_line].l_open)(dev, tp));
332: }
333:
334: /*ARGSUSED*/
335: int
336: dzclose(dev_t dev, int flag, int mode, struct proc *p)
337: {
338: struct dz_softc *sc;
339: struct tty *tp;
340: int unit, line;
341:
342:
343: unit = DZ_I2C(minor(dev));
344: line = DZ_PORT(minor(dev));
345: sc = dz_cd.cd_devs[unit];
346:
347: tp = sc->sc_dz[line].dz_tty;
348:
349: (*linesw[tp->t_line].l_close)(tp, flag);
350:
351: /* Make sure a BREAK state is not left enabled. */
352: (void) dzmctl(sc, line, DML_BRK, DMBIC);
353:
354: /* Do a hangup if so required. */
355: if ((tp->t_cflag & HUPCL) || !(tp->t_state & TS_ISOPEN))
356: (void) dzmctl(sc, line, 0, DMSET);
357:
358: sc->sc_openings--;
359: return (ttyclose(tp));
360: }
361:
362: int
363: dzread(dev_t dev, struct uio *uio, int flag)
364: {
365: struct tty *tp;
366: struct dz_softc *sc;
367:
368: sc = dz_cd.cd_devs[DZ_I2C(minor(dev))];
369:
370: tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty;
371: return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
372: }
373:
374: int
375: dzwrite(dev_t dev, struct uio *uio, int flag)
376: {
377: struct tty *tp;
378: struct dz_softc *sc;
379:
380: sc = dz_cd.cd_devs[DZ_I2C(minor(dev))];
381:
382: tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty;
383: return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
384: }
385:
386: /*ARGSUSED*/
387: int
388: dzioctl(dev_t dev, u_long cmd, caddr_t data, int flag, struct proc *p)
389: {
390: struct dz_softc *sc;
391: struct tty *tp;
392: int unit, line;
393: int error;
394:
395: unit = DZ_I2C(minor(dev));
396: line = DZ_PORT(minor(dev));
397: sc = dz_cd.cd_devs[unit];
398: tp = sc->sc_dz[line].dz_tty;
399:
400: error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
401: if (error >= 0)
402: return (error);
403:
404: error = ttioctl(tp, cmd, data, flag, p);
405: if (error >= 0)
406: return (error);
407:
408: switch (cmd) {
409:
410: case TIOCSBRK:
411: (void) dzmctl(sc, line, DML_BRK, DMBIS);
412: break;
413:
414: case TIOCCBRK:
415: (void) dzmctl(sc, line, DML_BRK, DMBIC);
416: break;
417:
418: case TIOCSDTR:
419: (void) dzmctl(sc, line, DML_DTR, DMBIS);
420: break;
421:
422: case TIOCCDTR:
423: (void) dzmctl(sc, line, DML_DTR, DMBIC);
424: break;
425:
426: case TIOCMSET:
427: (void) dzmctl(sc, line, *(int *)data, DMSET);
428: break;
429:
430: case TIOCMBIS:
431: (void) dzmctl(sc, line, *(int *)data, DMBIS);
432: break;
433:
434: case TIOCMBIC:
435: (void) dzmctl(sc, line, *(int *)data, DMBIC);
436: break;
437:
438: case TIOCMGET:
439: *(int *)data = (dzmctl(sc, line, 0, DMGET) & ~DML_BRK);
440: break;
441:
442: default:
443: return (ENOTTY);
444: }
445: return (0);
446: }
447:
448: struct tty *
449: dztty(dev_t dev)
450: {
451: struct dz_softc *sc = dz_cd.cd_devs[DZ_I2C(minor(dev))];
452: struct tty *tp = sc->sc_dz[DZ_PORT(minor(dev))].dz_tty;
453:
454: return (tp);
455: }
456:
457: /*ARGSUSED*/
458: int
459: dzstop(struct tty *tp, int flag)
460: {
461: if (tp->t_state & TS_BUSY)
462: if (!(tp->t_state & TS_TTSTOP))
463: tp->t_state |= TS_FLUSH;
464: return(0);
465: }
466:
467: void
468: dzstart(struct tty *tp)
469: {
470: struct dz_softc *sc;
471: struct clist *cl;
472: int unit, line, s;
473: char state;
474:
475: unit = DZ_I2C(minor(tp->t_dev));
476: line = DZ_PORT(minor(tp->t_dev));
477: sc = dz_cd.cd_devs[unit];
478:
479: s = spltty();
480: if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) {
481: splx(s);
482: return;
483: }
484: cl = &tp->t_outq;
485: if (cl->c_cc <= tp->t_lowat) {
486: if (tp->t_state & TS_ASLEEP) {
487: tp->t_state &= ~TS_ASLEEP;
488: wakeup((caddr_t)cl);
489: }
490: selwakeup(&tp->t_wsel);
491: }
492: if (cl->c_cc == 0) {
493: splx(s);
494: return;
495: }
496:
497: tp->t_state |= TS_BUSY;
498:
499: state = DZ_READ_WORD(dr_tcrw) & 255;
500: if ((state & (1 << line)) == 0) {
501: DZ_WRITE_BYTE(dr_tcr, state | (1 << line));
502: }
503: dzxint(sc);
504: splx(s);
505: }
506:
507: static int
508: dzparam(struct tty *tp, struct termios *t)
509: {
510: struct dz_softc *sc;
511: int cflag = t->c_cflag;
512: int unit, line;
513: int ispeed = ttspeedtab(t->c_ispeed, dzspeedtab);
514: int ospeed = ttspeedtab(t->c_ospeed, dzspeedtab);
515: unsigned lpr;
516: int s;
517:
518: unit = DZ_I2C(minor(tp->t_dev));
519: line = DZ_PORT(minor(tp->t_dev));
520: sc = dz_cd.cd_devs[unit];
521:
522: /* check requested parameters */
523: if (ospeed < 0 || ispeed < 0 || ispeed != ospeed)
524: return (EINVAL);
525:
526: tp->t_ispeed = t->c_ispeed;
527: tp->t_ospeed = t->c_ospeed;
528: tp->t_cflag = cflag;
529:
530: if (ospeed == 0) {
531: (void) dzmctl(sc, line, 0, DMSET); /* hang up line */
532: return (0);
533: }
534:
535: s = spltty();
536:
537: lpr = DZ_LPR_RX_ENABLE | ((ispeed&0xF)<<8) | line;
538:
539: switch (cflag & CSIZE)
540: {
541: case CS5:
542: lpr |= DZ_LPR_5_BIT_CHAR;
543: break;
544: case CS6:
545: lpr |= DZ_LPR_6_BIT_CHAR;
546: break;
547: case CS7:
548: lpr |= DZ_LPR_7_BIT_CHAR;
549: break;
550: default:
551: lpr |= DZ_LPR_8_BIT_CHAR;
552: break;
553: }
554: if (cflag & PARENB)
555: lpr |= DZ_LPR_PARENB;
556: if (cflag & PARODD)
557: lpr |= DZ_LPR_OPAR;
558: if (cflag & CSTOPB)
559: lpr |= DZ_LPR_2_STOP;
560:
561: DZ_WRITE_WORD(dr_lpr, lpr);
562:
563: splx(s);
564: return (0);
565: }
566:
567: static unsigned
568: dzmctl(struct dz_softc *sc, int line, int bits, int how)
569: {
570: unsigned status;
571: unsigned mbits;
572: unsigned bit;
573: int s;
574:
575: s = spltty();
576:
577: mbits = 0;
578:
579: bit = (1 << line);
580:
581: /* external signals as seen from the port */
582:
583: status = DZ_READ_BYTE(dr_dcd) | sc->sc_dsr;
584:
585: if (status & bit)
586: mbits |= DML_DCD;
587:
588: status = DZ_READ_BYTE(dr_ring);
589:
590: if (status & bit)
591: mbits |= DML_RI;
592:
593: /* internal signals/state delivered to port */
594:
595: status = DZ_READ_BYTE(dr_dtr);
596:
597: if (status & bit)
598: mbits |= DML_DTR;
599:
600: if (sc->sc_brk & bit)
601: mbits |= DML_BRK;
602:
603: switch (how)
604: {
605: case DMSET:
606: mbits = bits;
607: break;
608:
609: case DMBIS:
610: mbits |= bits;
611: break;
612:
613: case DMBIC:
614: mbits &= ~bits;
615: break;
616:
617: case DMGET:
618: splx(s);
619: return (mbits);
620: }
621:
622: if (mbits & DML_DTR) {
623: DZ_WRITE_BYTE(dr_dtr, DZ_READ_BYTE(dr_dtr) | bit);
624: } else {
625: DZ_WRITE_BYTE(dr_dtr, DZ_READ_BYTE(dr_dtr) & ~bit);
626: }
627:
628: if (mbits & DML_BRK) {
629: sc->sc_brk |= bit;
630: DZ_WRITE_BYTE(dr_break, sc->sc_brk);
631: } else {
632: sc->sc_brk &= ~bit;
633: DZ_WRITE_BYTE(dr_break, sc->sc_brk);
634: }
635:
636: splx(s);
637: return (mbits);
638: }
639:
640: /*
641: * This is called by timeout() periodically.
642: * Check to see if modem status bits have changed.
643: */
644: static void
645: dzscan(void *arg)
646: {
647: struct dz_softc *sc;
648: struct tty *tp;
649: int n, bit, port;
650: unsigned csr;
651: int s;
652:
653: s = spltty();
654:
655: for (n = 0; n < dz_cd.cd_ndevs; n++) {
656:
657: if (dz_cd.cd_devs[n] == NULL)
658: continue;
659:
660: sc = dz_cd.cd_devs[n];
661:
662: for (port = 0; port < sc->sc_type; port++) {
663:
664: tp = sc->sc_dz[port].dz_tty;
665: bit = (1 << port);
666:
667: if ((DZ_READ_BYTE(dr_dcd) | sc->sc_dsr) & bit) {
668: if (!(tp->t_state & TS_CARR_ON))
669: (*linesw[tp->t_line].l_modem) (tp, 1);
670: } else if ((tp->t_state & TS_CARR_ON) &&
671: (*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
672: DZ_WRITE_BYTE(dr_tcr,
673: (DZ_READ_WORD(dr_tcrw) & 255) & ~bit);
674: }
675: }
676:
677: /*
678: * If the RX interrupt rate is this high, switch
679: * the controller to Silo Alarm - which means don't
680: * interrupt until the RX silo has 16 characters in
681: * it (the silo is 64 characters in all).
682: * Avoid oscillating SA on and off by not turning
683: * if off unless the rate is appropriately low.
684: */
685:
686: csr = DZ_READ_WORD(dr_csr);
687:
688: if (sc->sc_rxint > (16*10)) {
689: if ((csr & DZ_CSR_SAE) == 0)
690: DZ_WRITE_WORD(dr_csr, csr | DZ_CSR_SAE);
691: } else if ((csr & DZ_CSR_SAE) != 0)
692: if (sc->sc_rxint < 10)
693: DZ_WRITE_WORD(dr_csr, csr & ~(DZ_CSR_SAE));
694:
695: sc->sc_rxint = 0;
696: }
697: splx(s);
698: timeout_add(&dz_timeout, hz);
699: }
700:
701: /*
702: * Called after an ubareset. The DZ card is reset, but the only thing
703: * that must be done is to start the receiver and transmitter again.
704: * No DMA setup to care about.
705: */
706: void
707: dzreset(struct device *dev)
708: {
709: struct dz_softc *sc = (void *)dev;
710: struct tty *tp;
711: int i;
712:
713: for (i = 0; i < sc->sc_type; i++) {
714: tp = sc->sc_dz[i].dz_tty;
715:
716: if ((tp->t_state & TS_ISOPEN) == 0)
717: continue;
718:
719: dzparam(tp, &tp->t_termios);
720: dzmctl(sc, i, DML_DTR, DMSET);
721: tp->t_state &= ~TS_BUSY;
722: dzstart(tp); /* Kick off transmitter again */
723: }
724: }
725:
726: /*
727: * Drain RX fifo.
728: */
729: static void
730: dzdrain(struct dz_softc *sc)
731: {
732: while (DZ_READ_WORD(dr_rbuf) & DZ_RBUF_DATA_VALID)
733: /*EMPTY*/;
734: }
CVSweb