File: [local] / sys / arch / vax / boot / common / srt0.S (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:08:35 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: srt0.S,v 1.1 2002/06/11 09:36:24 hugh Exp $ */
/* $NetBSD: srt0.S,v 1.2 2002/03/31 00:11:14 matt Exp $ */
/*
* Copyright (c) 1994 Ludd, University of Lule}, Sweden.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed at Ludd, University of Lule}.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* All bugs are subject to removal without further notice */
#include "../include/asm.h"
/*
* Auto-moving startup code for standalone programs. Can be loaded
* (almost) anywhere in memory but moves itself to the position
* it is linked for. Must be started at first position, recommended
* is phys addr 0 (boot loads programs at 0, but starts them at the
* position set in a.out header.
*/
.globl nisse # pass -e nisse to ld gives OK start addr
.set nisse,0
ALTENTRY(start)
nop;nop;
movl $_C_LABEL(start), sp # Probably safe place for stack
pushr $0x1fff # save for later usage
subl3 $_C_LABEL(start), $_C_LABEL(edata), r0
movab _C_LABEL(start), r1 # get where we are
movl $_C_LABEL(start), r3 # get where we want to be
cmpl r1,r3 # are we where we want to be?
beql relocated # already relocated, skip copy
movc3 r0,(r1),(r3) # copy
subl3 $_C_LABEL(edata), $_C_LABEL(end), r2
movc5 $0,(r3),$0,r2,(r3) # Zero bss
movpsl -(sp)
pushl $relocated
rei
relocated: # now relocation is done !!!
movl sp,_C_LABEL(bootregs) # *bootregs
calls $0, _C_LABEL(Xmain) # Were here!
halt # no return
ENTRY(machdep_start, 0)
calls $0,_C_LABEL(niclose) # Evil hack to shutdown DEBNA.
mtpr $0x1f,$0x12 # Block all interrupts
mtpr $0,$0x18 # stop real time interrupt clock
movl 4(ap), r6
movl 20(ap), r9 # end of symbol table
pushl 8(ap) # number of symbols
pushl 16(ap) # start of symbols
movab _C_LABEL(bootrpb),r10 # get RPB address
pushl r10 # argument for new boot
ashl $9,76(r10),r8 # memory size (COMPAT)
movl $3,r11 # ask boot (COMPAT)
clrl r10 # no boot dev (COMPAT)
calls $3,(r6)
halt