/* $OpenBSD: com_ebus.c,v 1.12 2007/04/03 23:17:42 kettenis Exp $ */
/* $NetBSD: com_ebus.c,v 1.6 2001/07/24 19:27:10 eeh Exp $ */
/*
* Copyright (c) 1999, 2000 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* NS Super I/O PC87332VLJ "com" to ebus attachment
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <machine/bus.h>
#include <machine/autoconf.h>
#include <machine/openfirm.h>
#include <sparc64/dev/ebusreg.h>
#include <sparc64/dev/ebusvar.h>
#include <dev/cons.h>
#include <dev/ic/comvar.h>
cdev_decl(com); /* XXX this belongs elsewhere */
int com_ebus_match(struct device *, void *, void *);
void com_ebus_attach(struct device *, struct device *, void *);
struct cfattach com_ebus_ca = {
sizeof(struct com_softc), com_ebus_match, com_ebus_attach
};
static char *com_names[] = {
"su",
"su_pnp",
NULL
};
int
com_ebus_match(parent, match, aux)
struct device *parent;
void *match;
void *aux;
{
struct ebus_attach_args *ea = aux;
int i;
for (i=0; com_names[i]; i++)
if (strcmp(ea->ea_name, com_names[i]) == 0)
return (1);
if (strcmp(ea->ea_name, "serial") == 0) {
char compat[80];
/* Could be anything. */
if ((i = OF_getproplen(ea->ea_node, "compatible")) &&
OF_getprop(ea->ea_node, "compatible", compat,
sizeof(compat)) == i) {
if (strcmp(compat, "su16552") == 0 ||
strcmp(compat, "su16550") == 0 ||
strcmp(compat, "su") == 0) {
return (1);
}
}
}
return (0);
}
/* XXXART - was 1846200 */
#define BAUD_BASE (1843200)
void
com_ebus_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct com_softc *sc = (void *)self;
struct ebus_attach_args *ea = aux;
int i, com_is_input, com_is_output;
sc->sc_iobase = EBUS_PADDR_FROM_REG(&ea->ea_regs[0]);
/*
* Addresses that should be supplied by the prom:
* - normal com registers
* - ns873xx configuration registers
* - DMA space
* The `com' driver does not use DMA accesses, so we can
* ignore that for now. We should enable the com port in
* the ns873xx registers here. XXX
*
* Use the prom address if there.
*/
if (ea->ea_nvaddrs) {
if (bus_space_map(ea->ea_memtag, ea->ea_vaddrs[0], 0,
BUS_SPACE_MAP_PROMADDRESS, &sc->sc_ioh) != 0) {
printf(": can't map register space\n");
return;
}
sc->sc_iot = ea->ea_memtag;
} else if (ebus_bus_map(ea->ea_memtag, 0,
EBUS_PADDR_FROM_REG(&ea->ea_regs[0]),
ea->ea_regs[0].size, 0, 0, &sc->sc_ioh) == 0) {
sc->sc_iot = ea->ea_memtag;
} else if (ebus_bus_map(ea->ea_iotag, 0,
EBUS_PADDR_FROM_REG(&ea->ea_regs[0]),
ea->ea_regs[0].size, 0, 0, &sc->sc_ioh) == 0) {
sc->sc_iot = ea->ea_iotag;
} else {
printf(": can't map register space\n");
return;
}
sc->sc_hwflags = 0;
sc->sc_swflags = 0;
sc->sc_frequency = BAUD_BASE;
for (i = 0; i < ea->ea_nintrs; i++)
bus_intr_establish(sc->sc_iot, ea->ea_intrs[i],
IPL_TTY, 0, comintr, sc, self->dv_xname);
/* Figure out if we're the console. */
com_is_input = (ea->ea_node == OF_instance_to_package(OF_stdin()));
com_is_output = (ea->ea_node == OF_instance_to_package(OF_stdout()));
if (com_is_input || com_is_output) {
struct consdev *cn_orig;
comconsioh = sc->sc_ioh;
cn_orig = cn_tab;
/* Attach com as the console. */
if (comcnattach(sc->sc_iot, sc->sc_iobase, 9600,
sc->sc_frequency,
((TTYDEF_CFLAG & ~(CSIZE | PARENB))|CREAD | CS8 | HUPCL))) {
printf("Error: comcnattach failed\n");
}
cn_tab = cn_orig;
if (com_is_input) {
cn_tab->cn_dev = /*XXX*/makedev(36, sc->sc_dev.dv_unit);
cn_tab->cn_probe = comcnprobe;
cn_tab->cn_init = comcninit;
cn_tab->cn_getc = comcngetc;
cn_tab->cn_pollc = comcnpollc;
}
if (com_is_output)
cn_tab->cn_putc = comcnputc;
}
if (OF_getproplen(ea->ea_node, "keyboard") == 0)
printf(": keyboard");
else if (OF_getproplen(ea->ea_node, "mouse") == 0)
printf(": mouse");
/* Now attach the driver */
com_attach_subr(sc);
}