File: [local] / sys / arch / sparc / include / scfio.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:08:16 2008 UTC (16 years, 3 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: scfio.h,v 1.2 2003/06/02 18:40:59 jason Exp $ */
/*
* Copyright (c) 1999 Jason L. Wright (jason@thought.net)
* All rights reserved.
*
* This software was developed by Jason L. Wright under contract with
* RTMX Incorporated (http://www.rtmx.com).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* ioctls and flags for sysconfig registers on Force CPU-5V boards.
*/
/* led1/led2 */
#define SCF_LED_COLOR_MASK 0x03 /* color bits */
#define SCF_LED_COLOR_OFF 0x00 /* led off */
#define SCF_LED_COLOR_GREEN 0x01 /* green led */
#define SCF_LED_COLOR_RED 0x02 /* red led */
#define SCF_LED_COLOR_YELLOW 0x03 /* yellow led */
#define SCF_LED_BLINK_MASK 0x0c /* blink bits */
#define SCF_LED_BLINK_NONE 0x00 /* steady led */
#define SCF_LED_BLINK_HALF 0x04 /* blink 1/2 hz */
#define SCF_LED_BLINK_ONE 0x08 /* blink 1 hz */
#define SCF_LED_BLINK_TWO 0x0c /* blink 2 hz */
/* 7 segment led */
#define SCF_7LED_A 0x01 /* Layout: */
#define SCF_7LED_B 0x02 /* AAA */
#define SCF_7LED_C 0x04 /* FF BB */
#define SCF_7LED_D 0x08 /* GGG */
#define SCF_7LED_E 0x10 /* EE CC */
#define SCF_7LED_F 0x20 /* DDD P */
#define SCF_7LED_G 0x40
#define SCF_7LED_P 0x80
/* flash memory control */
#define SCF_FMCTRL_SELROM 0x01 /* select boot/user flash */
#define SCF_FMCTRL_SELBOOT 0x02 /* select 1st/2nd flash */
#define SCF_FMCTRL_WRITEV 0x04 /* turn on write voltage */
#define SCF_FMCTRL_SELADDR 0x38 /* address 21:19 bits */
#define SCFIOCSLED1 _IOW('S', 0x01, u_int8_t) /* set led1 */
#define SCFIOCGLED1 _IOR('S', 0x02, u_int8_t) /* get led1 */
#define SCFIOCSLED2 _IOW('S', 0x03, u_int8_t) /* set led2 */
#define SCFIOCGLED2 _IOR('S', 0x04, u_int8_t) /* get led2 */
#define SCFIOCSLED7 _IOW('S', 0x05, u_int8_t) /* set 7-segment led */
#define SCFIOCGLED7 _IOW('S', 0x06, u_int8_t) /* get 7-segment led */
#define SCFIOCGROT _IOR('S', 0x07, u_int8_t) /* get rotary sw */
#define SCFIOCSFMCTRL _IOW('S', 0x08, u_int8_t) /* set flash ctrl */
#define SCFIOCGFMCTRL _IOR('S', 0x09, u_int8_t) /* get flash ctrl */