Annotation of sys/arch/sparc/dev/xyreg.h, Revision 1.1.1.1
1.1 nbrk 1: /* $OpenBSD: xyreg.h,v 1.4 2004/04/12 22:12:32 jmc Exp $ */
2: /* $NetBSD: xyreg.h,v 1.3 1996/03/31 22:39:02 pk Exp $ */
3:
4: /*
5: *
6: * Copyright (c) 1995 Charles D. Cranor
7: * All rights reserved.
8: *
9: * Redistribution and use in source and binary forms, with or without
10: * modification, are permitted provided that the following conditions
11: * are met:
12: * 1. Redistributions of source code must retain the above copyright
13: * notice, this list of conditions and the following disclaimer.
14: * 2. Redistributions in binary form must reproduce the above copyright
15: * notice, this list of conditions and the following disclaimer in the
16: * documentation and/or other materials provided with the distribution.
17: * 3. All advertising materials mentioning features or use of this software
18: * must display the following acknowledgement:
19: * This product includes software developed by Charles D. Cranor.
20: * 4. The name of the author may not be used to endorse or promote products
21: * derived from this software without specific prior written permission.
22: *
23: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
24: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
25: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
26: * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
27: * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
28: * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
29: * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
30: * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31: * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
32: * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33: */
34:
35: /*
36: * x y r e g . h
37: *
38: * this file contains the description of the Xylogics 450/451's hardware
39: * data structures.
40: *
41: * author: Chuck Cranor <chuck@ccrc.wustl.edu>
42: */
43:
44: #define XYC_MAXDEV 2 /* max devices per controller */
45: #define XYC_CTLIOPB XYC_MAXDEV /* controller's iopb */
46: #define XYC_RESETUSEC 1000000 /* max time for xyc reset (same as xdc?) */
47: #define XYC_MAXIOPB (XYC_MAXDEV+1)
48: /* max number of iopbs that can be active */
49: #define XYC_MAXTIME 4*1000000 /* four seconds before we give up and reset */
50: #define XYC_MAXTRIES 4 /* max number of times to retry an operation */
51: #define XYC_INTERLEAVE 1 /* interleave (from disk label?) */
52: #define XYFM_BPS 0x200 /* must be 512! */
53:
54: /*
55: * xyc device interface
56: * (lives in VME address space) [note: bytes are swapped!]
57: */
58:
59: struct xyc {
60: volatile u_char xyc_reloc_hi; /* iopb relocation (low byte) */
61: volatile u_char xyc_reloc_lo; /* iopb relocation (high byte) */
62: volatile u_char xyc_addr_hi; /* iopb address (low byte) */
63: volatile u_char xyc_addr_lo; /* iopb address (high byte) */
64: volatile u_char xyc_rsetup; /* reset/update reg */
65: volatile u_char xyc_csr; /* control and status register */
66: };
67:
68: /*
69: * xyc_csr
70: */
71:
72: #define XYC_GBSY 0x80 /* go/busy */
73: #define XYC_ERR 0x40 /* error */
74: #define XYC_DERR 0x20 /* double error! */
75: #define XYC_IPND 0x10 /* interrupt pending */
76: #define XYC_ADRM 0x08 /* 24-bit addressing */
77: #define XYC_AREQ 0x04 /* attention request */
78: #define XYC_AACK 0x02 /* attention ack. */
79: #define XYC_DRDY 0x01 /* drive ready */
80:
81: /*
82: * Input/Output Parameter Block (iopb)
83: *
84: * all controller commands are done via iopb's. to start a command you
85: * must do this:
86: * [1] allocate space in DVMA space for the iopb
87: * [2] fill out all the fields of the iopb
88: * [3] if the controller isn't busy, start the iopb by loading the address
89: * and reloc in the xyc's registers and setting the "go" bit [done]
90: * [4] controller busy: set AREQ bit, and wait for AACK bit.
91: * add iopb to the chain, and clear AREQ to resume I/O
92: *
93: * when the controller is done with a command it may interrupt (if you
94: * ask it to) and it will set the XYC_IPND bit in the csr. clear
95: * the interrupt by writing one to this bit.
96: *
97: * the format of the iopb is described in section 2.4 of the manual.
98: * note that it is byte-swapped on the sun.
99: */
100:
101: struct xy_iopb {
102: /* section 2.4.2: byte 1 */
103: volatile u_char resv1:1; /* reserved */
104: volatile u_char iei:1; /* interrupt on each IOPB done */
105: volatile u_char ierr:1; /* interrupt on error (no effect on 450) */
106: volatile u_char hdp:1; /* hold dual port drive */
107: volatile u_char asr:1; /* autoseek retry */
108: volatile u_char eef:1; /* enable extended fn. (overlap seek) */
109: volatile u_char ecm:2; /* ECC correction mode */
110: #define XY_ECM 2 /* use mode 2 (see section 2.4.2) */
111: /* section 2.4.1: byte 0 */
112: volatile u_char aud:1; /* auto-update iopb */
113: volatile u_char relo:1; /* enable multibus relocation (>16bit addrs)*/
114: volatile u_char chen:1; /* chain enable, "next iopb" is valid */
115: volatile u_char ien:1; /* interrupt enable */
116: volatile u_char com:4; /* command */
117: #define XYCMD_NOP 0x0 /* no-op */
118: #define XYCMD_WR 0x1 /* write */
119: #define XYCMD_RD 0x2 /* read */
120: #define XYCMD_WTH 0x3 /* write track headers */
121: #define XYCMD_RTH 0x4 /* read track headers */
122: #define XYCMD_SK 0x5 /* seek */
123: #define XYCMD_RST 0x6 /* drive reset */
124: #define XYCMD_WFM 0x7 /* write format */
125: #define XYCMD_RDH 0x8 /* read header, data, and ECC */
126: #define XYCMD_RDS 0x9 /* read drive status */
127: #define XYCMD_WRH 0xa /* write header, data, and ECC */
128: #define XYCMD_SDS 0xb /* set drive size */
129: #define XYCMD_ST 0xc /* self test */
130: #define XYCMD_R 0xd /* reserved */
131: #define XYCMD_MBL 0xe /* maint. buffer load */
132: #define XYCMD_MBD 0xf /* main. buffer dump */
133: /* section 2.4.4: byte 3 */
134: volatile u_char errno; /* error or completion code */
135: /* section 2.4.3: byte 2 */
136: volatile u_char errs:1; /* error summary bit */
137: volatile u_char resv2:2; /* reserved */
138: volatile u_char ctyp:3; /* controller type */
139: #define XYCT_450 1 /* the 450 controller */
140: volatile u_char resv3:1; /* reserved */
141: volatile u_char done:1; /* done! */
142: /* section 2.4.6: byte 5 */
143: volatile u_char dt:2; /* drive type */
144: #define XYC_MAXDT 3 /* largest drive type possible */
145: volatile u_char resv4:4; /* reserved */
146: volatile u_char unit:2; /* unit # */
147: /* section 2.4.5: byte 4 */
148: volatile u_char bw:1; /* byte(1)/word(0) xfer size */
149: volatile u_char intlv:4; /* interleave factor (0=1:1, 1=2:1, etc.) */
150: volatile u_char thro:3; /* dma throttle (0=2,1=4,2=8, etc...) */
151: #define XY_THRO 4 /* 4 == 32 dma cycles */
152: /* section 2.4.8: byte 7 */
153: volatile u_char sect; /* sector # */
154: /* section 2.4.7: byte 6 */
155: volatile u_char head; /* head # */
156: /* section 2.4.9: byte 8,9 */
157: volatile u_short cyl; /* cyl # */
158: /* section 2.4.10: byte a,b */
159: volatile u_short scnt; /* sector count, also drive status */
160: #define xy_dr_status scnt
161: #define XYS_ONCL 0x80 /* on-cylinder (active LOW) */
162: #define XYS_DRDY 0x40 /* drive ready (active LOW) */
163: #define XYS_WRPT 0x20 /* write protect */
164: #define XYS_DPB 0x10 /* dual-port busy */
165: #define XYS_SKER 0x08 /* hard seek error */
166: #define XYS_DFLT 0x04 /* disk fault */
167: /* section 2.4.11: byte c,d */
168: volatile u_short dataa; /* data address */
169: /* section 2.4.12: byte e,f */
170: volatile u_short datar; /* data relocation pointer */
171: /* section 2.4.14: byte 11 */
172: volatile u_char subfn; /* sub-function */
173: /* section 2.4.13: byte 10 */
174: volatile u_char hoff; /* head offset for fixed/removable drives */
175: /* section 2.4.15: byte 12,13 */
176: volatile u_short nxtiopb; /* next iopb address (same relocation) */
177: /* section 2.4.16: byte 14,15 */
178: volatile u_short eccpat; /* ecc pattern */
179: /* section 2.4.17: byte 16,17 */
180: volatile u_short eccaddr; /* ecc address */
181: };
182:
183:
184: /*
185: * errors (section 2.4.4.1)
186: */
187:
188: /* software error codes */
189: #define XY_ERR_FAIL 0xff /* general total failure */
190: #define XY_ERR_DERR 0xfe /* double error */
191: /* no error */
192: #define XY_ERR_AOK 0x00 /* success */
193:
194: #define XY_ERR_IPEN 0x01 /* interrupt pending */
195: #define XY_ERR_BCFL 0x03 /* busy conflict */
196: #define XY_ERR_TIMO 0x04 /* operation timeout */
197: #define XY_ERR_NHDR 0x05 /* header not found */
198: #define XY_ERR_HARD 0x06 /* hard ECC error */
199: #define XY_ERR_ICYL 0x07 /* illegal cylinder address */
200: #define XY_ERR_ISEC 0x0a /* illegal sector address */
201: #define XY_ERR_SMAL 0x0d /* last sector too small */
202: #define XY_ERR_SACK 0x0e /* slave ACK error (non-existent memory) */
203: #define XY_ERR_CHER 0x12 /* cylinder and head/header error */
204: #define XY_ERR_SRTR 0x13 /* auto-seek retry successful */
205: #define XY_ERR_WPRO 0x14 /* write-protect error */
206: #define XY_ERR_UIMP 0x15 /* unimplemented command */
207: #define XY_ERR_DNRY 0x16 /* drive not ready */
208: #define XY_ERR_SZER 0x17 /* sector count zero */
209: #define XY_ERR_DFLT 0x18 /* drive faulted */
210: #define XY_ERR_ISSZ 0x19 /* illegal sector size */
211: #define XY_ERR_SLTA 0x1a /* self test a */
212: #define XY_ERR_SLTB 0x1b /* self test b */
213: #define XY_ERR_SLTC 0x1c /* self test c */
214: #define XY_ERR_SOFT 0x1e /* soft ECC error */
215: #define XY_ERR_SFOK 0x1f /* soft ECC error recovered */
216: #define XY_ERR_IHED 0x20 /* illegal head */
217: #define XY_ERR_DSEQ 0x21 /* disk sequencer error */
218: #define XY_ERR_SEEK 0x25 /* seek error */
219:
220:
221: /* error actions */
222: #define XY_ERA_PROG 0x10 /* program error: quit */
223: #define XY_ERA_SOFT 0x30 /* soft error: we recovered */
224: #define XY_ERA_HARD 0x40 /* hard error: retry */
225: #define XY_ERA_RSET 0x60 /* hard error: reset, then retry */
226: #define XY_ERA_WPRO 0x90 /* write protected */
227:
228:
CVSweb