File: [local] / sys / arch / sparc / dev / dma.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:08:03 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: dma.c,v 1.24 2007/05/29 09:54:07 sobrado Exp $ */
/* $NetBSD: dma.c,v 1.46 1997/08/27 11:24:16 bouyer Exp $ */
/*
* Copyright (c) 1994 Paul Kranenburg. All rights reserved.
* Copyright (c) 1994 Peter Galbavy. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sparc/autoconf.h>
#include <sparc/cpu.h>
#include <sparc/sparc/cpuvar.h>
#include <scsi/scsi_all.h>
#include <scsi/scsiconf.h>
#include <dev/ic/ncr53c9xreg.h>
#include <dev/ic/ncr53c9xvar.h>
#include <sparc/dev/sbusvar.h>
#include <sparc/dev/dmareg.h>
#include <sparc/dev/dmavar.h>
#include <sparc/dev/espvar.h>
int dmaprint(void *, const char *);
void dmaattach(struct device *, struct device *, void *);
int dmamatch(struct device *, void *, void *);
void dma_reset(struct dma_softc *, int);
void espdma_reset(struct dma_softc *);
int ledmamatch(struct device *, void *, void *);
void ledma_reset(struct dma_softc *);
void dma_enintr(struct dma_softc *);
int dma_isintr(struct dma_softc *);
int espdmaintr(struct dma_softc *);
int ledmaintr(struct dma_softc *);
int dma_setup(struct dma_softc *, caddr_t *, size_t *,
int, size_t *);
void dma_go(struct dma_softc *);
struct cfattach dma_ca = {
sizeof(struct dma_softc), dmamatch, dmaattach
};
struct cfdriver dma_cd = {
NULL, "dma", DV_DULL
};
struct cfattach ledma_ca = {
sizeof(struct dma_softc), ledmamatch, dmaattach
};
struct cfdriver ledma_cd = {
NULL, "ledma", DV_DULL
};
int
dmaprint(aux, name)
void *aux;
const char *name;
{
struct confargs *ca = aux;
if (name)
printf("[%s at %s]", ca->ca_ra.ra_name, name);
printf(" offset 0x%x", ca->ca_offset);
return (UNCONF);
}
int
dmamatch(parent, vcf, aux)
struct device *parent;
void *vcf, *aux;
{
struct cfdata *cf = vcf;
struct confargs *ca = aux;
struct romaux *ra = &ca->ca_ra;
if (strcmp(cf->cf_driver->cd_name, ra->ra_name) &&
strcmp("espdma", ra->ra_name))
return (0);
#if defined(SUN4C) || defined(SUN4M)
if (ca->ca_bustype == BUS_SBUS) {
if (!sbus_testdma((struct sbus_softc *)parent, ca))
return (0);
return (1);
}
#endif
ra->ra_len = NBPG;
return (probeget(ra->ra_vaddr, 4) != -1);
}
/*
* Attach all the sub-devices we can find
*/
void
dmaattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct confargs *ca = aux;
struct dma_softc *sc = (void *)self;
int devnode;
#if defined(SUN4C) || defined(SUN4M)
int node;
struct confargs oca;
char *name;
#endif
if (ca->ca_ra.ra_vaddr == NULL || ca->ca_ra.ra_nvaddrs == 0)
ca->ca_ra.ra_vaddr =
mapiodev(ca->ca_ra.ra_reg, 0, ca->ca_ra.ra_len);
sc->sc_regs = (struct dma_regs *) ca->ca_ra.ra_vaddr;
devnode = ca->ca_ra.ra_node;
/*
* If we're a ledma, check to see what cable type is currently
* active and set the appropriate bit in the ledma csr so that
* it gets used. If we didn't netboot, the PROM won't have the
* "cable-selection" property; default to TP and then the user
* can change it via a "link0" option to ifconfig.
*/
if (strcmp(ca->ca_ra.ra_name, "ledma") == 0) {
char *cabletype = getpropstring(devnode, "cable-selection");
if (strcmp(cabletype, "tpe") == 0) {
sc->sc_regs->csr |= E_TP_AUI;
} else if (strcmp(cabletype, "aui") == 0) {
sc->sc_regs->csr &= ~E_TP_AUI;
} else {
/* assume TP if nothing there */
sc->sc_regs->csr |= E_TP_AUI;
}
delay(20000); /* manual says we need 20ms delay */
}
/*
* Get transfer burst size from PROM and plug it into the
* controller registers. This is needed on the Sun4m; do
* others need it too?
*/
if (CPU_ISSUN4M) {
int sbusburst = ((struct sbus_softc *)parent)->sc_burst;
if (sbusburst == 0)
sbusburst = SBUS_BURST_32 - 1; /* 1->16 */
sc->sc_burst = getpropint(devnode, "burst-sizes", -1);
if (sc->sc_burst == -1)
/* take SBus burst sizes */
sc->sc_burst = sbusburst;
/* Clamp at parent's burst sizes */
sc->sc_burst &= sbusburst;
}
printf(": rev ");
sc->sc_rev = sc->sc_regs->csr & D_DEV_ID;
switch (sc->sc_rev) {
case DMAREV_0:
printf("0");
break;
case DMAREV_ESC:
printf("esc");
break;
case DMAREV_1:
printf("1");
break;
case DMAREV_PLUS:
printf("1+");
break;
case DMAREV_2:
printf("2");
break;
case DMAREV_HME:
printf("fas");
break;
default:
printf("unknown (0x%x)", sc->sc_rev);
}
printf("\n");
/* indirect functions */
dma_setuphandlers(sc);
if (CPU_ISSUN4)
goto espsearch;
#if defined(SUN4C) || defined(SUN4M)
/* Propagate bootpath */
if (ca->ca_ra.ra_bp != NULL &&
(strcmp(ca->ca_ra.ra_bp->name, "espdma") == 0 ||
strcmp(ca->ca_ra.ra_bp->name, "dma") == 0 ||
strcmp(ca->ca_ra.ra_bp->name, "ledma") == 0))
oca.ca_ra.ra_bp = ca->ca_ra.ra_bp + 1;
else
oca.ca_ra.ra_bp = NULL;
/* search through children */
node = firstchild(devnode);
if (node != 0) do {
name = getpropstring(node, "name");
if (!romprop(&oca.ca_ra, name, node))
continue;
sbus_translate(parent, &oca);
oca.ca_bustype = BUS_SBUS;
(void) config_found(&sc->sc_dev, (void *)&oca, dmaprint);
} while ((node = nextsibling(node)) != 0); else
#endif /* SUN4C || SUN4M */
if (strcmp(ca->ca_ra.ra_name, "dma") == 0) {
espsearch:
/*
* find the ESP by poking around the esp device structures
*
* What happens here is that if the esp driver has not been
* configured, then this returns a NULL pointer. Then when the
* esp actually gets configured, it does the opposing test, and
* if the sc->sc_dma field in its softc is NULL, then tries to
* find the matching dma driver.
*
*/
sc->sc_esp = (struct esp_softc *)
getdevunit("esp", sc->sc_dev.dv_unit);
/*
* and a back pointer to us, for DMA
*/
if (sc->sc_esp)
sc->sc_esp->sc_dma = sc;
}
}
void
dma_setuphandlers(struct dma_softc *sc)
{
if (sc->sc_dev.dv_cfdata == NULL || /* happens on SUNW,fas */
sc->sc_dev.dv_cfdata->cf_attach == &dma_ca) {
sc->reset = espdma_reset;
sc->intr = espdmaintr;
} else {
sc->reset = ledma_reset;
sc->intr = ledmaintr;
}
sc->enintr = dma_enintr;
sc->isintr = dma_isintr;
sc->setup = dma_setup;
sc->go = dma_go;
}
#define DMAWAIT(SC, COND, MSG, DONTPANIC) do if (COND) { \
int count = 500000; \
while ((COND) && --count > 0) DELAY(1); \
if (count == 0) { \
printf("%s: line %d: CSR = 0x%lx\n", __FILE__, __LINE__, \
(SC)->sc_regs->csr); \
if (DONTPANIC) \
printf(MSG); \
else \
panic(MSG); \
} \
} while (0)
#define DMA_DRAIN(sc, dontpanic) do { \
/* \
* DMA rev0 & rev1: we are not allowed to touch the DMA "flush" \
* and "drain" bits while it is still thinking about a \
* request. \
* other revs: D_ESC_R_PEND bit reads as 0 \
*/ \
DMAWAIT(sc, sc->sc_regs->csr & D_ESC_R_PEND, "R_PEND", dontpanic);\
if (sc->sc_rev != DMAREV_HME) { \
/* \
* Select drain bit based on revision \
* also clears errors and D_TC flag \
*/ \
if (sc->sc_rev == DMAREV_1 || sc->sc_rev == DMAREV_0) \
DMACSR(sc) |= D_ESC_DRAIN; \
else \
DMACSR(sc) |= D_INVALIDATE; \
} \
/* \
* Wait for draining to finish \
* rev0 & rev1 call this PACKCNT \
*/ \
DMAWAIT(sc, sc->sc_regs->csr & D_DRAINING, "DRAINING", dontpanic);\
} while(0)
#define DMA_FLUSH(sc, dontpanic) do { \
int csr; \
/* \
* DMA rev0 & rev1: we are not allowed to touch the DMA "flush" \
* and "drain" bits while it is still thinking about a \
* request. \
* other revs: D_ESC_R_PEND bit reads as 0 \
*/ \
DMAWAIT(sc, sc->sc_regs->csr & D_ESC_R_PEND, "R_PEND", dontpanic);\
csr = DMACSR(sc); \
csr &= ~(D_WRITE|D_EN_DMA); /* no-ops on ENET */ \
csr |= D_INVALIDATE; /* XXX FAS ? */ \
DMACSR(sc) = csr; \
} while(0)
void
dma_reset(sc, isledma)
struct dma_softc *sc;
int isledma;
{
int csr;
DMA_FLUSH(sc, 1);
csr = DMACSR(sc);
if (sc->sc_rev == DMAREV_HME)
DMACSR(sc) = csr | D_HW_RESET_FAS366;
csr |= D_RESET; /* reset DMA */
DMACSR(sc) = csr;
DELAY(200); /* > 10 SBus clocks(?) */
/*DMAWAIT1(sc); why was this here? */
DMACSR(sc) &= ~D_RESET; /* de-assert reset line */
DELAY(5);
csr = DMACSR(sc);
csr |= D_INT_EN; /* enable interrupts */
if (sc->sc_rev > DMAREV_1 && isledma == 0) {
if (sc->sc_rev == DMAREV_HME)
csr |= D_TWO_CYCLE;
else
csr |= D_FASTER;
}
switch (sc->sc_rev) {
case DMAREV_HME:
case DMAREV_2:
csr &= ~L64854_BURST_SIZE; /* must clear first */
if (sc->sc_burst & SBUS_BURST_32) {
csr |= L64854_BURST_32;
} else if (sc->sc_burst & SBUS_BURST_16) {
csr |= L64854_BURST_16;
} else {
csr |= L64854_BURST_0;
}
break;
case DMAREV_ESC:
csr |= D_ESC_AUTODRAIN; /* Auto-drain */
if (sc->sc_burst & SBUS_BURST_32) {
csr &= ~D_ESC_BURST;
} else
csr |= D_ESC_BURST;
break;
default:
break;
}
DMACSR(sc) = csr;
if (sc->sc_rev == DMAREV_HME) {
DMADDR(sc) = 0;
sc->sc_dmactl = csr;
}
sc->sc_active = 0; /* and of course we aren't */
}
void
espdma_reset(sc)
struct dma_softc *sc;
{
dma_reset(sc, 0);
}
int
ledmamatch(parent, vcf, aux)
struct device *parent;
void *vcf, *aux;
{
struct cfdata *cf = vcf;
struct confargs *ca = aux;
struct romaux *ra = &ca->ca_ra;
if (strcmp(cf->cf_driver->cd_name, ra->ra_name))
return (0);
#if defined(SUN4C) || defined(SUN4M)
if (!sbus_testdma((struct sbus_softc *)parent, ca))
return(0);
#endif
return (1);
}
void
ledma_reset(sc)
struct dma_softc *sc;
{
dma_reset(sc, 1);
}
void
dma_enintr(sc)
struct dma_softc *sc;
{
sc->sc_regs->csr |= D_INT_EN;
}
int
dma_isintr(sc)
struct dma_softc *sc;
{
return (sc->sc_regs->csr & (D_INT_PEND|D_ERR_PEND));
}
#define DMAMAX(a) (0x01000000 - ((a) & 0x00ffffff))
/*
* setup a dma transfer
*/
int
dma_setup(sc, addr, len, datain, dmasize)
struct dma_softc *sc;
caddr_t *addr;
size_t *len;
int datain;
size_t *dmasize; /* IN-OUT */
{
u_long csr;
DMA_FLUSH(sc, 0);
#if 0
DMACSR(sc) &= ~D_INT_EN;
#endif
sc->sc_dmaaddr = addr;
sc->sc_dmalen = len;
NCR_DMA(("%s: start %d@%p,%d\n", sc->sc_dev.dv_xname,
*sc->sc_dmalen, *sc->sc_dmaaddr, datain ? 1 : 0));
/*
* the rules say we cannot transfer more than the limit
* of this DMA chip (64k for old and 16Mb for new),
* and we cannot cross a 16Mb boundary.
*/
*dmasize = sc->sc_dmasize =
min(*dmasize, DMAMAX((size_t) *sc->sc_dmaaddr));
NCR_DMA(("dma_setup: dmasize = %d\n", sc->sc_dmasize));
/*
* XXX what length?
*/
if (sc->sc_rev == DMAREV_HME) {
DMACSR(sc) = sc->sc_dmactl | L64854_RESET;
DMACSR(sc) = sc->sc_dmactl;
DMACNT(sc) = *dmasize;
}
/* Program the DMA address */
if (CPU_ISSUN4M && sc->sc_dmasize) {
/*
* Use dvma mapin routines to map the buffer into DVMA space.
*/
sc->sc_dvmaaddr = *sc->sc_dmaaddr;
sc->sc_dvmakaddr = kdvma_mapin(sc->sc_dvmaaddr,
sc->sc_dmasize, 0);
if (sc->sc_dvmakaddr == NULL)
panic("dma: cannot allocate DVMA address");
DMADDR(sc) = sc->sc_dvmakaddr;
} else
DMADDR(sc) = *sc->sc_dmaaddr;
if (sc->sc_rev == DMAREV_ESC) {
/* DMA ESC chip bug work-around */
long bcnt = sc->sc_dmasize;
long eaddr = bcnt + (long)*sc->sc_dmaaddr;
if ((eaddr & PGOFSET) != 0)
bcnt = round_page(bcnt);
DMACNT(sc) = bcnt;
}
/* Setup DMA control register */
csr = DMACSR(sc);
if (datain)
csr |= D_WRITE;
else
csr &= ~D_WRITE;
csr |= D_INT_EN;
if (sc->sc_rev == DMAREV_HME) {
csr |= (D_DSBL_SCSI_DRN | D_EN_DMA);
}
DMACSR(sc) = csr;
return 0;
}
void
dma_go(sc)
struct dma_softc *sc;
{
/* Start DMA */
DMACSR(sc) |= D_EN_DMA;
sc->sc_active = 1;
}
/*
* Pseudo (chained) interrupt from the esp driver to kick the
* current running DMA transfer. I am replying on espintr() to
* pickup and clean errors for now
*
* return 1 if it was a DMA continue.
*/
int
espdmaintr(sc)
struct dma_softc *sc;
{
struct ncr53c9x_softc *nsc = &sc->sc_esp->sc_ncr53c9x;
int trans, resid;
u_long csr;
csr = DMACSR(sc);
NCR_DMA(("%s: intr: addr %p, csr %b\n", sc->sc_dev.dv_xname,
DMADDR(sc), csr, DDMACSR_BITS));
if (csr & (D_ERR_PEND|D_SLAVE_ERR)) {
printf("%s: error: csr=%b\n", sc->sc_dev.dv_xname,
csr, DDMACSR_BITS);
DMACSR(sc) &= ~D_EN_DMA; /* Stop DMA */
/* Invalidate the queue; SLAVE_ERR bit is write-to-clear */
DMACSR(sc) |= D_INVALIDATE|D_SLAVE_ERR;
return (-1);
}
/* This is an "assertion" :) */
if (sc->sc_active == 0)
panic("dmaintr: DMA wasn't active");
DMA_DRAIN(sc, 0);
/* DMA has stopped */
DMACSR(sc) &= ~D_EN_DMA;
sc->sc_active = 0;
if (sc->sc_dmasize == 0) {
/* A "Transfer Pad" operation completed */
NCR_DMA(("dmaintr: discarded %d bytes (tcl=%d, tcm=%d)\n",
NCR_READ_REG(nsc, NCR_TCL) |
(NCR_READ_REG(nsc, NCR_TCM) << 8),
NCR_READ_REG(nsc, NCR_TCL),
NCR_READ_REG(nsc, NCR_TCM)));
return 0;
}
resid = 0;
/*
* If a transfer onto the SCSI bus gets interrupted by the device
* (e.g. for a SAVEPOINTER message), the data in the FIFO counts
* as residual since the ESP counter registers get decremented as
* bytes are clocked into the FIFO.
*/
if (!(csr & D_WRITE) &&
(resid = (NCR_READ_REG(nsc, NCR_FFLAG) & NCRFIFO_FF)) != 0) {
NCR_DMA(("dmaintr: empty esp FIFO of %d ", resid));
}
if ((nsc->sc_espstat & NCRSTAT_TC) == 0) {
/*
* `Terminal count' is off, so read the residue
* out of the ESP counter registers.
*/
resid += (NCR_READ_REG(nsc, NCR_TCL) |
(NCR_READ_REG(nsc, NCR_TCM) << 8) |
((nsc->sc_cfg2 & NCRCFG2_FE)
? (NCR_READ_REG(nsc, NCR_TCH) << 16)
: 0));
if (resid == 0 && sc->sc_dmasize == 65536 &&
(nsc->sc_cfg2 & NCRCFG2_FE) == 0)
/* A transfer of 64K is encoded as `TCL=TCM=0' */
resid = 65536;
}
trans = sc->sc_dmasize - resid;
if (trans < 0) { /* transferred < 0 ? */
#if 0
/*
* This situation can happen in perfectly normal operation
* if the ESP is reselected while using DMA to select
* another target. As such, don't print the warning.
*/
printf("%s: xfer (%d) > req (%d)\n",
sc->sc_dev.dv_xname, trans, sc->sc_dmasize);
#endif
trans = sc->sc_dmasize;
}
NCR_DMA(("dmaintr: tcl=%d, tcm=%d, tch=%d; trans=%d, resid=%d\n",
NCR_READ_REG(nsc, NCR_TCL),
NCR_READ_REG(nsc, NCR_TCM),
(nsc->sc_cfg2 & NCRCFG2_FE)
? NCR_READ_REG(nsc, NCR_TCH) : 0,
trans, resid));
if (csr & D_WRITE)
cpuinfo.cache_flush(*sc->sc_dmaaddr, trans);
if (CPU_ISSUN4M && sc->sc_dvmakaddr)
dvma_mapout((vaddr_t)sc->sc_dvmakaddr,
(vaddr_t)sc->sc_dvmaaddr, sc->sc_dmasize);
*sc->sc_dmalen -= trans;
*sc->sc_dmaaddr += trans;
#if 0 /* this is not normal operation just yet */
if (*sc->sc_dmalen == 0 ||
nsc->sc_phase != nsc->sc_prevphase)
return 0;
/* and again */
dma_start(sc, sc->sc_dmaaddr, sc->sc_dmalen, DMACSR(sc) & D_WRITE);
return 1;
#endif
return 0;
}
/*
* Pseudo (chained) interrupt from the le driver to handle DMA
* errors.
*
* XXX: untested
*/
int
ledmaintr(sc)
struct dma_softc *sc;
{
u_long csr;
csr = DMACSR(sc);
if (csr & D_ERR_PEND) {
DMACSR(sc) &= ~D_EN_DMA; /* Stop DMA */
DMACSR(sc) |= D_INVALIDATE;
printf("%s: error: csr=%b\n", sc->sc_dev.dv_xname,
csr, DDMACSR_BITS);
DMA_RESET(sc);
}
return 1;
}