Annotation of sys/arch/powerpc/include/trap.h, Revision 1.1
1.1 ! nbrk 1: /* $OpenBSD: trap.h,v 1.7 2007/04/26 21:36:32 kettenis Exp $ */
! 2: /* $NetBSD: trap.h,v 1.1 1996/09/30 16:34:35 ws Exp $ */
! 3:
! 4: /*
! 5: * Copyright (C) 1995, 1996 Wolfgang Solfrank.
! 6: * Copyright (C) 1995, 1996 TooLs GmbH.
! 7: * All rights reserved.
! 8: *
! 9: * Redistribution and use in source and binary forms, with or without
! 10: * modification, are permitted provided that the following conditions
! 11: * are met:
! 12: * 1. Redistributions of source code must retain the above copyright
! 13: * notice, this list of conditions and the following disclaimer.
! 14: * 2. Redistributions in binary form must reproduce the above copyright
! 15: * notice, this list of conditions and the following disclaimer in the
! 16: * documentation and/or other materials provided with the distribution.
! 17: * 3. All advertising materials mentioning features or use of this software
! 18: * must display the following acknowledgement:
! 19: * This product includes software developed by TooLs GmbH.
! 20: * 4. The name of TooLs GmbH may not be used to endorse or promote products
! 21: * derived from this software without specific prior written permission.
! 22: *
! 23: * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
! 24: * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
! 25: * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
! 26: * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
! 27: * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
! 28: * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
! 29: * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
! 30: * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
! 31: * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
! 32: * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
! 33: */
! 34: #ifndef _POWERPC_TRAP_H_
! 35: #define _POWERPC_TRAP_H_
! 36:
! 37: #define EXC_RSVD 0x0000 /* Reserved */
! 38: #define EXC_RST 0x0100 /* Reset */
! 39: #define EXC_MCHK 0x0200 /* Machine Check */
! 40: #define EXC_DSI 0x0300 /* Data Storage Interrupt */
! 41: #define EXC_ISI 0x0400 /* Instruction Storage Interrupt */
! 42: #define EXC_EXI 0x0500 /* External Interrupt */
! 43: #define EXC_ALI 0x0600 /* Alignment Interrupt */
! 44: #define EXC_PGM 0x0700 /* Program Interrupt */
! 45: #define EXC_FPU 0x0800 /* Floating-point Unavailable */
! 46: #define EXC_DECR 0x0900 /* Decrementer Interrupt */
! 47: #define EXC_SC 0x0c00 /* System Call */
! 48: #define EXC_TRC 0x0d00 /* Trace */
! 49: #define EXC_FPA 0x0e00 /* Floating-point Assist */
! 50: #define EXC_PERF 0x0f00 /* Performance Monitoring */
! 51: #define EXC_VEC 0x0f20 /* AltiVec Unavailable */
! 52: #define EXC_BPT 0x1300 /* Instruction Breakpoint */
! 53: #define EXC_SMI 0x1400 /* System Management Interrupt */
! 54: #define EXC_VECAST 0x1600 /* AltiVec Assist */
! 55:
! 56: /* And these are only on the 603: */
! 57: #define EXC_IMISS 0x1000 /* Instruction translation miss */
! 58: #define EXC_DLMISS 0x1100 /* Data load translation miss */
! 59: #define EXC_DSMISS 0x1200 /* Data store translation miss */
! 60:
! 61: #define EXC_LAST 0x2f00 /* Last possible exception vector */
! 62:
! 63: #define EXC_AST 0x3000 /* Fake AST vector */
! 64:
! 65: /* Trap was in user mode */
! 66: #define EXC_USER 0x10000
! 67:
! 68: /*
! 69: * EXC_ALI sets bits in the DSISR and DAR to provide enough
! 70: * information to recover from the unaligned access without needing to
! 71: * parse the offending instruction. This includes certain bits of the
! 72: * opcode, and information about what registers are used. The opcode
! 73: * indicator values below come from Appendix F of Book III of "The
! 74: * PowerPC Architecture".
! 75: */
! 76:
! 77: #define EXC_ALI_OPCODE_INDICATOR(dsisr) ((dsisr >> 10) & 0x7f)
! 78: #define EXC_ALI_LFD 0x09
! 79: #define EXC_ALI_STFD 0x0b
! 80: #define EXC_ALI_DCBZ 0x5f
! 81:
! 82: /* Macros to extract register information */
! 83: #define EXC_ALI_RST(dsisr) ((dsisr >> 5) & 0x1f) /* source or target */
! 84: #define EXC_ALI_RA(dsisr) (dsisr & 0x1f)
! 85:
! 86: #endif /* _POWERPC_TRAP_H_ */
CVSweb