Return to files.mvmeppc CVS log

Up to [local] / sys / arch / mvmeppc / conf

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

#	$OpenBSD: files.mvmeppc,v 1.9 2005/03/08 20:00:23 tdeval Exp $

#
# mvmeppc-specific configuration info
#
maxpartitions 16

maxusers 2 8 64

file	dev/cninit.c
file	arch/mvmeppc/mvmeppc/db_interface.c

file	arch/mvmeppc/dev/bugio.c
file	arch/mvmeppc/dev/clock.c
file	arch/mvmeppc/dev/mem.c

file	arch/mvmeppc/mvmeppc/autoconf.c
file	arch/mvmeppc/mvmeppc/conf.c
file	arch/mvmeppc/mvmeppc/disksubr.c		disk
file	arch/mvmeppc/mvmeppc/machdep.c
file	arch/mvmeppc/mvmeppc/bus_space.c
file	arch/mvmeppc/mvmeppc/bus_dma.c
file	arch/mvmeppc/mvmeppc/ppc1_machdep.c

define	mainbus {}
device	mainbus
attach	mainbus at root
file	arch/mvmeppc/dev/mainbus.c		mainbus

device	cpu
attach	cpu at mainbus
file	arch/mvmeppc/dev/cpu.c

device	raven {}
attach	raven at mainbus
file	arch/mvmeppc/dev/raven.c

device	openpic
attach	openpic at raven
file	arch/mvmeppc/dev/openpic.c

# Various things that need to be included early...

# Media Independent Interface (mii)
include	"../../../dev/mii/files.mii"

# I2O
include	"../../../dev/i2o/files.i2o"

#
# ISA Bus support
#

include	"dev/isa/files.isa"
include	"dev/isa/files.isapnp"

file	arch/mvmeppc/isa/isa_machdep.c		isa

#
# PCI bus support
#

include	"dev/pci/files.pci"

device	mpcpcibr {} : pcibus
attach	mpcpcibr at raven
file	arch/mvmeppc/pci/mpcpcibr.c		mpcpcibr

# PCI-Host bridge chipsets
device	pchb:	pcibus
attach	pchb at pci
file	arch/mvmeppc/pci/pchb.c			pchb

# PCI-ISA bridge chipsets
device	pcib:	isabus
attach	pcib at pci
file	arch/mvmeppc/pci/pcib.c			pcib

#
# Input Devices (not yet)
#

#include "dev/pckbc/files.pckbc"
#include "dev/wscons/files.wscons"

#
# Block Devices
#

include	"../../../scsi/files.scsi"
#include "../../../dev/atapiscsi/files.atapiscsi"
#include "../../../dev/ata/files.ata"

device	bugtty: tty
attach	bugtty at mainbus
file	arch/mvmeppc/dev/bugtty.c		bugtty needs-flag

#major	{wd = 0}
major	{sd = 2}
major	{cd = 3}
major	{rd = 17}