File: [local] / sys / arch / mvme88k / stand / bugcrt / crt.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:33 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: crt.c,v 1.6 2006/05/16 22:51:30 miod Exp $ */
#include <sys/types.h>
#include <machine/prom.h>
#include "stand.h"
#include "libbug.h"
struct mvmeprom_args bugargs;
__asm__ (".text");
__asm__ (STACK_ASM_OP); /* initial sp value */
__asm__ (".long _start"); /* initial ip value */
extern void main(void);
void
start(u_int dev_lun, u_int ctrl_lun, u_int flags, u_int ctrl_addr, u_int entry,
u_int conf_blk, char *arg_start, char *arg_end)
{
extern u_int edata, end;
char *nbarg_start;
char *nbarg_end;
u_int dummy;
/*
* Save r10 and r11 first. We can't put declare them as arguments
* since the normal calling convention would put them on the stack.
*/
__asm__ __volatile__ ("or %0, r0, r10" : "=r" (nbarg_start) : :
"r10", "r11");
__asm__ __volatile__ ("or %0, r0, r11" : "=r" (nbarg_end) : :
"r10", "r11");
/*
* This code enables the SFU1 and is used for single stage
* bootstraps or the first stage of a two stage bootstrap.
* Do not use lower registers to enable the SFU1. This wipes out
* the args. Not cool at all... r25 seems free.
*/
__asm__ __volatile__ ("ldcr %0, cr1" : "=r" (dummy));
__asm__ __volatile__ ("clr %0, %0, 1<3>; stcr %0, cr1" : "+r" (dummy));
memset(&edata, 0, ((int)&end - (int)&edata));
bugargs.dev_lun = dev_lun;
bugargs.ctrl_lun = ctrl_lun;
bugargs.flags = flags;
bugargs.ctrl_addr = ctrl_addr;
bugargs.entry = entry;
bugargs.conf_blk = conf_blk;
bugargs.arg_start = arg_start;
bugargs.arg_end = arg_end;
bugargs.nbarg_start = nbarg_start;
bugargs.nbarg_end = nbarg_end;
*bugargs.arg_end = '\0';
main();
_rtt();
/* NOTREACHED */
}
void
__main()
{
}
void
bugexec(void (*addr)())
{
(*addr)(bugargs.dev_lun, bugargs.ctrl_lun, bugargs.flags,
bugargs.ctrl_addr, bugargs.entry, bugargs.conf_blk,
bugargs.arg_start, bugargs.arg_end);
printf("bugexec: %p returned!\n", addr);
_rtt();
}