![]() ![]() | ![]() |
File: [local] / sys / arch / mvme88k / include / prom.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:35 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: prom.h,v 1.16 2006/05/16 22:51:28 miod Exp $ */ /* * Copyright (c) 1998 Steve Murphree, Jr. * Copyright (c) 1996 Nivas Madhur * Copyright (c) 1995 Theo de Raadt * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __MACHINE_PROM_H__ #define __MACHINE_PROM_H__ /* BUG trap vector */ #define MVMEPROM_VECTOR 496 #define MVMEPROM_INCHR 0x00 #define MVMEPROM_INSTAT 0x01 #define MVMEPROM_INLN 0x02 #define MVMEPROM_READSTR 0x03 #define MVMEPROM_READLN 0x04 #define MVMEPROM_DSKRD 0x10 #define MVMEPROM_DSKWR 0x11 #define MVMEPROM_DSKCFIG 0x12 #define MVMEPROM_DSKFMT 0x14 #define MVMEPROM_DSKCTRL 0x15 #define MVMEPROM_NETFOPEN 0x1b #define MVMEPROM_NETFREAD 0x1c #define MVMEPROM_NETCTRL 0x1d #define MVMEPROM_OUTCHR 0x20 #define MVMEPROM_OUTSTR 0x21 #define MVMEPROM_OUTSTRCRLF 0x22 #define MVMEPROM_WRITE 0x23 #define MVMEPROM_WRITELN 0x24 #define MVMEPROM_OUTCRLF 0x26 #define MVMEPROM_DELAY 0x43 #define MVMEPROM_RTC_RD 0x53 #define MVMEPROM_EXIT 0x63 #define MVMEPROM_GETBRDID 0x70 #define MVMEPROM_ENVIRON 0x71 #define MVMEPROM_FORKMPU 0x100 #define NETCTRLCMD_GETETHER 1 #define ENVIRONCMD_WRITE 1 #define ENVIRONCMD_READ 2 #define ENVIRONTYPE_EOL 0 #define ENVIRONTYPE_START 1 #define ENVIRONTYPE_DISKBOOT 2 #define ENVIRONTYPE_ROMBOOT 3 #define ENVIRONTYPE_NETBOOT 4 #define ENVIRONTYPE_MEMSIZE 5 #define FORKMPU_NOT_IDLE -1 #define FORKMPU_BAD_ADDRESS -2 #define FORKMPU_NO_MPU -3 #ifndef LOCORE struct mvmeprom_netctrl { u_char ctrl; u_char dev; u_short status; u_long cmd; u_long addr; u_long len; u_long flags; }; struct mvmeprom_netfopen { u_char ctrl; u_char dev; u_short status; char filename[64]; }; struct mvmeprom_netfread { u_char ctrl; u_char dev; u_short status; u_long addr; u_short bytes; u_short blk; u_long timeout; }; struct prom_environ_hdr { u_char type; u_char len; }; struct mvmeprom_brdid { u_long eye_catcher; u_char rev; u_char month; u_char day; u_char year; u_short size; u_short rsv1; u_short model; u_char suffix[2]; u_short options; u_char family; u_char cpu; u_short ctrlun; u_short devlun; u_short devtype; u_short devnum; u_long bug; u_char version[4]; u_char serial[12]; /* SBC serial number */ u_char id[16]; /* SBC id */ u_char pwa[16]; /* printed wiring assembly number */ u_char speed[4]; /* cpu speed */ u_char etheraddr[6]; /* mac address, all zero if no ether */ u_char fill[2]; u_char scsiid[2]; /* local SCSI id */ u_char sysid[8]; /* system id - nothing on mvme187 */ u_char brd1_pwb[8]; /* memory board 1 pwb */ u_char brd1_serial[8]; /* memory board 1 serial */ u_char brd2_pwb[8]; /* memory board 2 pwb */ u_char brd2_serial[8]; /* memory board 2 serial */ u_char reserved[153]; u_char cksum[1]; }; struct mvmeprom_time { u_char year_BCD; u_char month_BCD; u_char day_BCD; u_char wday_BCD; u_char hour_BCD; u_char min_BCD; u_char sec_BCD; u_char cal_BCD; }; struct mvmeprom_dskio { u_char ctrl_lun; u_char dev_lun; u_short status; void *pbuffer; u_long blk_num; u_short blk_cnt; u_char flag; #define BUG_FILE_MARK 0x80 #define IGNORE_FILENUM 0x02 #define END_OF_FILE 0x01 u_char addr_mod; }; #define MVMEPROM_BLOCK_SIZE 256 extern unsigned long bugvec[2], sysbugvec[2]; /* BUG trap vector copies */ #endif /* _LOCORE */ #ifndef RB_NOSYM #define RB_NOSYM 0x4000 #endif #endif /* __MACHINE_PROM_H__ */