File: [local] / sys / arch / mvme88k / dev / vsreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:38 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: vsreg.h,v 1.14 2006/12/21 02:28:47 krw Exp $ */
/*
* Copyright (c) 2004, Miodrag Vallat.
* Copyright (c) 1999 Steve Murphree, Jr.
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from source contributed by Mark Bellon.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _MVME328_REG_H_
#define _MVME328_REG_H_
/*
* JAGUAR specific device limits
*/
#define JAGUAR_MIN_Q_SIZ 2
#define JAGUAR_MAX_CTLR_CMDS 80 /* Interphase says so */
#define JAGUAR_MAX_Q_SIZ (JAGUAR_MAX_CTLR_CMDS / NUM_WQ)
/*
* COUGAR specific device limits
*/
#define COUGAR_MIN_Q_SIZ 2
#define COUGAR_CMDS_PER_256K 42 /* Interphase says so */
/*
* Structures
*/
#define NUM_CQE 10
#define NUM_IOPB NUM_CQE
#define NUM_WQ 15
/*
* Master Control Status Block (MCSB)
*/
#define MCSB_MSR 0x000000 /* master status register */
#define M_MSR_QFC 0x0004 /* queue flush complete */
#define M_MSR_BOK 0x0002 /* board OK */
#define M_MSR_CNA 0x0001 /* controller not available */
#define MCSB_MCR 0x000002 /* master control register */
#define M_MCR_SFEN 0x2000 /* sysfail enable */
#define M_MCR_RES 0x1000 /* reset controller */
#define M_MCR_FLQ 0x0800 /* flush queue */
#define M_MCR_FLQR 0x0004 /* flush queue and report */
#define M_MCR_SQM 0x0001 /* start queue mode */
#define MCSB_IQAR 0x000004 /* interrupt on queue avail */
#define M_IQAR_IQEA 0x8000 /* interrupt on queue entry avail */
#define M_IQAR_IQEH 0x4000 /* interrupt on queue half empty */
#define M_IQAR_ILVL 0x0700 /* interrupt lvl on queue available */
#define M_IQAR_IVCT 0x00ff /* interrupt vector on queue avail */
#define MCSB_QHDP 0x000006 /* queue head pointer */
#define MCSB_THAW 0x000008 /* thaw work queue */
#define M_THAW_TWQN 0xff00 /* thaw work queue number */
#define M_THAW_TWQE 0x0001 /* thaw work queue enable */
#define MCSB_SIZE 0x000010
/*
* Host Semaphore Block (HSB)
*/
#define HSB_INITQ 0x000000 /* init MCE flag */
#define HSB_WORKQ 0x000002 /* work queue number */
#define HSB_MAGIC 0x000004 /* magic word */
#define HSB_SIZE 0x000008
/*
* Controller Initialization Block (CIB)
*/
#define CIB_NCQE 0x000000 /* number of CQE */
#define CIB_BURST 0x000002 /* DMA burst count */
#define CIB_NVECT 0x000004 /* normal completion vector */
#define CIB_EVECT 0x000006 /* error completion vector */
#define M_VECT_ILVL 0x0700 /* Interrupt Level mask */
#define M_VECT_IVCT 0x00ff /* Interrupt Vector mask */
#define CIB_PID 0x000008 /* primary scsi bus id */
#define CIB_SID 0x00000a /* secondary scsi bus id */
#define M_PSID_DFT 0x0008 /* default ID enable */
#define M_PSID_ID 0x0007 /* primary/secondary SCSI ID */
#define CIB_CRBO 0x00000c /* CRB offset */
#define CIB_SELECT 0x00000e /* selection timeout in ms */
#define CIB_WQTIMO 0x000012 /* work queue timeout in 256ms */
#define CIB_VMETIMO 0x000016 /* VME timeout in 32ms */
#define CIB_OBMT 0x00001e /* offboard CRB mtype/xfer type/ad mod */
#define CIB_OBADDR 0x000020 /* host mem address for offboard CRB */
#define CIB_ERR_FLGS 0x000024 /* error recovery flags */
#define M_ERRFLGS_FOSR 0x0001 /* Freeze on SCSI bus reset */
#define M_ERRFLGS_RIN 0x0002 /* SCSI bus reset interrupt */
#define M_ERRFLGS_RSE 0x0004 /* Report COUGAR SCSI errors */
#define CIB_SBRIV 0x00002a /* scsi bus reset interrupt vector */
#define CIB_SOF0 0x00002c /* synchronous offset (bus 0) */
#define CIB_SRATE0 0x00002d /* sync negotiation rate (bus 0) */
#define CIB_SOF1 0x00002e /* synchronous offset (bus 0) */
#define CIB_SRATE1 0x00002f /* sync negotiation rate (bus 0) */
#define CIB_SIZE 0x000030
/*
* Command Queue Entry (CQE)
*/
#define CQE_QECR 0x000000 /* queue entry control reg */
#define M_QECR_IOPB 0x0f00 /* IOPB type (must be zero) */
#define M_QECR_HPC 0x0004 /* High Priority command */
#define M_QECR_AA 0x0002 /* abort acknowledge */
#define M_QECR_GO 0x0001 /* Go/Busy */
#define CQE_IOPB_ADDR 0x000002 /* IOPB address */
#define CQE_CTAG 0x000004 /* command tag */
#define CQE_IOPB_LENGTH 0x000008 /* IOPB length */
#define CQE_WORK_QUEUE 0x000009 /* work queue number */
#define CQE_SIZE 0x00000c
/*
* Command Response Block (CRB)
*/
#define CRB_CRSW 0x000000 /* status word */
#define M_CRSW_SE 0x0800 /* SCSI error (COUGAR) */
#define M_CRSW_RST 0x0400 /* SCSI Bus reset (COUGAR) */
#define M_CRSW_SC 0x0080 /* status change */
#define M_CRSW_CQA 0x0040 /* Command queue entry available */
#define M_CRSW_QMS 0x0020 /* queue mode started */
#define M_CRSW_AQ 0x0010 /* abort queue */
#define M_CRSW_EX 0x0008 /* exception */
#define M_CRSW_ER 0x0004 /* error */
#define M_CRSW_CC 0x0002 /* command complete */
#define M_CRSW_CRBV 0x0001 /* cmd response block valid/clear */
#define CRB_CTAG 0x000004 /* command tag */
#define CRB_IOPB_LENGTH 0x000008 /* IOPB length */
#define CRB_WORK_QUEUE 0x000009 /* work queue number */
#define CRB_SIZE 0x00000c
/*
* Controller Error Vector Status Block (CEVSB)
* This is a variation of the CRB, _but larger_.
*/
#define CONTROLLER_ERROR 0x0085
#define NR_SCSI_ERROR 0x0885
#define CEVSB_CRSW 0x000000 /* status word */
#define CEVSB_TYPE 0x000002 /* IOPB type */
#define CEVSB_CTAG 0x000004 /* command tag */
#define CEVSB_IOPB_LENGTH 0x000008 /* IOPB length */
#define CEVSB_WORK_QUEUE 0x000009 /* work queue number */
#define CEVSB_ERROR 0x00000d /* error code */
#define CEVSB_ERR_TYPE 0xc0 /* IOPB type error */
#define CEVSB_ERR_TO 0xc1 /* IOPB timeout error */
#define CEVSB_ERR_TR 0x82 /* Target Reconnect, no IOPB */
#define CEVSB_ERR_OF 0x83 /* Overflow */
#define CEVSB_ERR_BD 0x84 /* Bad direction */
#define CEVSB_ERR_NR 0x86 /* Non-Recoverabl Error */
#define CEVSB_ERR_PANIC 0xff /* Board Painc!!! */
#define CEVSB_AUXERR 0x00000e /* cougar error code */
#define CEVSB_SIZE 0x000010
/*
* Configuration Status Block (CSB)
*/
#define CSB_TYPE 0x000000 /* jaguar/cougar */
#define COUGAR 0x4220
#define JAGUAR 0x0000
#define CSB_PCODE 0x000003 /* product code */
#define CSB_PVAR 0x000009 /* product variation */
#define CSB_FREV 0x00000d /* firmware revision level */
#define CSB_FDATE 0x000012 /* firmware release date */
#define CSB_SSIZE 0x00001a /* system memory size in KB */
#define CSB_BSIZE 0x00001c /* buffer memory size in KB */
#define CSB_PFECID 0x000020 /* primary bus FEC id */
#define CSB_SFECID 0x000021 /* secondary bus FEC id */
#define CSB_PID 0x000022 /* primary bus id */
#define CSB_SID 0x000023 /* secondary bus id */
#define CSB_LPDS 0x000024 /* last primary device selected */
#define CSB_LSDS 0x000025 /* last secondary device selected */
#define CSB_PPS 0x000026 /* primary phase sense */
#define CSB_SPS 0x000027 /* secondary phase sense */
#define CSB_DBID 0x000029 /* daughter board id */
#define DBID_SCSI2 0x02 /* modern SCSI ??? */
#define DBID_PRINTER 0x04 /* printer daughter board */
#define DBID_SCSI 0x06 /* SCSI daugter board */
#define DBID_NONE 0x07 /* no daughter board */
#define CSB_SDS 0x00002b /* software DIP switch */
#define CSB_FWQR 0x00002e /* frozen work queues register */
#define CSB_SIZE 0x000078
/*
* IOPB Format (IOPB)
*/
#define IOPB_CMD 0x000000 /* command code */
#define IOPB_OPTION 0x000002 /* option word */
#define M_OPT_HEAD_TAG 0x3000 /* head of queue command queue tag */
#define M_OPT_ORDERED_TAG 0x2000 /* order command queue tag */
#define M_OPT_SIMPLE_TAG 0x1000 /* simple command queue tag */
#define M_OPT_GO_WIDE 0x0800 /* use WIDE transfers */
#define M_OPT_DIR 0x0100 /* VME direction bit */
#define M_OPT_SG_BLOCK 0x0008 /* scatter/gather in 512 byte blocks */
#define M_OPT_SS 0x0004 /* Suppress synchronous transfer */
#define M_OPT_SG 0x0002 /* scatter/gather bit */
#define M_OPT_IE 0x0001 /* Interrupt enable */
#define IOPB_STATUS 0x000004 /* return status word */
#define IOPB_NVCT 0x000008 /* normal completion vector */
#define IOPB_EVCT 0x000009 /* error completion vector */
#define IOPB_LEVEL 0x00000a /* interrupt level */
#define IOPB_ADDR 0x00000e /* address type and modifier */
#define M_ADR_TRANS 0x0c00 /* transfer type */
#define M_ADR_MEMT 0x0300 /* memory type */
#define M_ADR_MOD 0x00ff /* VME address modifier */
#define M_ADR_SG_LINK 0x8000 /* Scatter/Gather Link bit */
#define IOPB_BUFF 0x000010 /* buffer address */
#define IOPB_LENGTH 0x000014 /* max transfer length */
#define IOPB_SGTTL 0x000018 /* S/G total transfer length */
#define IOPB_UNIT 0x00001e /* unit address on scsi bus */
#define M_UNIT_EXT_LUN 0xff00 /* Extended Address */
#define M_UNIT_EXT 0x0080 /* Extended Address Enable */
#define M_UNIT_BUS 0x0040 /* SCSI Bus Selection */
#define M_UNIT_LUN 0x0038 /* Logical Unit Number */
#define M_UNIT_ID 0x0007 /* SCSI Device ID */
#define IOPB_SCSI_DATA 0x000020 /* SCSI words for passthrough */
#define IOPB_SHORT_SIZE 0x000020
#define IOPB_LONG_SIZE 0x000040
/*
* Initialize Work Queue Command Format (WQCF)
* This is a specific case of IOPB.
*/
#define WQCF_CMD 0x000000 /* command code */
#define M_WOPT_IWQ 0x8000 /* initialize work queue */
#define M_WOPT_PE 0x0008 /* parity check enable */
#define M_WOPT_FE 0x0004 /* freeze on error enable */
#define M_WOPT_TM 0x0002 /* target mode enable */
#define M_WOPT_AE 0x0001 /* abort enable */
#define WQCF_OPTION 0x000002 /* option word */
#define WQCF_STATUS 0x000004 /* return status word */
#define WQCF_NVCT 0x000008 /* normal completion vector */
#define WQCF_EVCT 0x000009 /* error completion vector */
#define WQCF_ILVL 0x00000a /* interrupt level */
#define WQCF_WORKQ 0x00001c /* work queue number */
#define WQCF_WOPT 0x00001e /* work queue options */
#define WQCF_SLOTS 0x000020 /* # of slots in work queues */
#define WQCF_CMDTO 0x000024 /* command timeout */
/*
* SCSI Reset Command Format (SRCF)
* This is a specific case of IOPB.
*/
#define SRCF_CMD 0x000000 /* command code */
#define SRCF_OPTION 0x000002 /* option word */
#define SRCF_STATUS 0x000004 /* return status word */
#define SRCF_NVCT 0x000008 /* normal completion vector */
#define SRCF_EVCT 0x000009 /* error completion vector */
#define SRCF_ILVL 0x00000a /* interrupt level */
#define SRCF_BUSID 0x00001c /* scsi bus id to reset */
/*
* Device Reinitialize Command Format (DRCF)
* This is a specific case of IOPB.
*/
#define DRCF_CMD 0x000000 /* command code */
#define DRCF_OPTION 0x000002 /* option word */
#define DRCF_STATUS 0x000004 /* return status word */
#define DRCF_NVCT 0x000008 /* normal completion vector */
#define DRCF_EVCT 0x000009 /* error completion vector */
#define DRCF_ILVL 0x00000a /* interrupt level */
#define DRCF_UNIT 0x00001e /* unit address */
/*
* Short I/O memory layout
*/
#define S_SHORTIO 0x000800
#define sh_MCSB (0)
#define sh_MCE (sh_MCSB + MCSB_SIZE)
#define sh_CQE(x) (sh_MCE + CQE_SIZE + CQE_SIZE * (x))
#define sh_IOPB(x) (sh_CQE(NUM_CQE) + IOPB_LONG_SIZE * (x))
#define sh_MCE_IOPB (sh_IOPB(NUM_IOPB))
#define sh_CIB (sh_MCE_IOPB + IOPB_LONG_SIZE)
#define sh_CSS (S_SHORTIO - CSB_SIZE)
#define sh_RET_IOPB (sh_CSS - IOPB_LONG_SIZE)
#define sh_CRB (sh_RET_IOPB - CRB_SIZE)
#define sh_CEVSB sh_CRB
#define sh_HSB (sh_CRB - HSB_SIZE)
#if (sh_CIB + CIB_SIZE > sh_HSB)
#error invalid memory layout
#endif
#define SELECTION_TIMEOUT 250 /* milliseconds */
#define VME_BUS_TIMEOUT 15 /* units of 30ms */
#define M328_INFINITE_TIMEOUT 0 /* wait forever */
/*
* IOPB command codes
*/
#define IOPB_PASSTHROUGH 0x20 /* SCSI passthrough commands */
#define IOPB_PASSTHROUGH_EXT 0x21 /* SCSI passthrough extended */
#define IOPB_RESET 0x22 /* reset bus */
#define CNTR_DIAG 0x40 /* perform diagnostics */
#define CNTR_INIT 0x41 /* initialize controller */
#define CNTR_INIT_WORKQ 0x42 /* initialize work queue */
#define CNTR_DUMP_INIT 0x43 /* dump initialization parameters */
#define CNTR_DUMP_WORDQ 0x44 /* dump work queue parameters */
#define CNTR_CANCEL_IOPB 0x48 /* cancel command tag */
#define CNTR_FLUSH_WORKQ 0x49 /* flush work queue */
#define CNTR_DEV_REINIT 0x4c /* reinitialize device */
#define CNTR_ISSUE_ABORT 0x4e /* abort has been issued */
#define CNTR_DOWNLOAD_FIRMWARE 0x4f /* download firmware (COUGAR) */
#define IOPB_UNIT_VALUE(bus, target, lun) \
(((bus) << 6) | ((lun) << 3) | (target & 7))
/*
* Memory types
*/
#define MEMT_16BIT 1 /* 16 bit memory type */
#define MEMT_32BIT 2 /* 32 bit memory type */
#define MEMT_SHIO 3 /* short I/O memory type */
#define MEMTYPE MEMT_32BIT
/*
* Transfer types
*/
#define TT_NORMAL 0 /* normal mode transfers */
#define TT_BLOCK 1 /* block mode transfers */
#define TT_DISABLE_INC_ADDR 2 /* disable incrementing addresses */
#define TT_D64 3 /* D64 mode transfers */
/*
* Error codes
*/
#define MACSI_GOOD_STATUS 0x00
#define MACSI_QUEUE_FULL 0x01
#define MACSI_CMD_CODE_ERR 0x04
#define MACSI_QUEUE_NUMBER_ERR 0x05
#define RESET_BUS_STATUS 0x11 /* SCSI bus reset IOPB forced this */
#define NO_SECONDARY_PORT 0x12 /* second SCSI bus not available */
#define SCSI_DEVICE_IS_RESET 0x14
#define CMD_ABORT_BY_RESET 0x15
#define VME_BUS_ERROR 0x20
#define VME_BUS_ACC_TIMEOUT 0x21
#define VME_BUS_BAD_ADDR 0x23
#define VME_BUS_BAD_MEM_TYPE 0x24
#define VME_BUS_BAD_COUNT 0x25
#define VME_BUS_FETCH_ERROR 0x26
#define VME_BUS_FETCH_TIMEOUT 0x27
#define VME_BUS_POST_ERROR 0x28
#define VME_BUS_POST_TIMEOUT 0x29
#define VME_BUS_BAD_FETCH_ADDR 0x2a
#define VME_BUS_BAD_POST_ADDR 0x2b
#define VME_BUS_SG_FETCH 0x2c
#define VME_BUS_SG_TIMEOUT 0x2d
#define VME_BUS_SG_COUNT 0x2e
#define SCSI_SELECTION_TO 0x30
#define SCSI_DISCONNECT_TIMEOUT 0x31
#define SCSI_ABNORMAL_SEQ 0x32
#define SCSI_DISCONNECT_ERR 0x33
#define SCSI_XFER_EXCEPTION 0x34
#define SCSI_PARITY_ERROR 0x35
#define DEVICE_NO_IOPB 0x82
#define IOPB_CTLR_EXH 0x83
#define IOPB_DIR_ERROR 0x84
#define COUGAR_ERROR 0x86
#define MACSI_INCORRECT_HW 0x90
#define MACSI_ILGL_IOPB_VAL 0x92
#define MACSI_ILLEGAL_IMAGE 0x9c
#define IOPB_TYPE_ERR 0xc0 /* IOPB type not 0 */
#define IOPB_TIMEOUT 0xc1
#define COUGAR_PANIC 0xff
#define MACSI_INVALID_TIMEOUT 0x843
/*
* VME addressing modes
*/
#define ADRM_STD_S_P 0x3e /* standard supervisory program */
#define ADRM_STD_S_D 0x3d /* standard supervisory data */
#define ADRM_STD_N_P 0x3a /* standard normal program */
#define ADRM_STD_N_D 0x39 /* standard normal data */
#define ADRM_SHT_S_IO 0x2d /* short supervisory I/O */
#define ADRM_SHT_N_IO 0x29 /* short normal I/O */
#define ADRM_EXT_S_P 0x0e /* extended supervisory program */
#define ADRM_EXT_S_D 0x0d /* extended supervisory data */
#define ADRM_EXT_N_P 0x0a /* extended normal program */
#define ADRM_EXT_N_D 0x09 /* extended normal data */
#define ADRM_EXT_S_BM 0x0f /* extended supervisory block mode */
#define ADRM_EXT_S_D64 0x0c /* extended supervisory D64 mode */
#define ADDR_MOD ((TT_NORMAL << 10) | (MEMTYPE << 8) | ADRM_EXT_S_D)
#define BLOCK_MOD ((TT_BLOCK << 10) | (MEMTYPE << 8) | ADRM_EXT_S_BM)
#define D64_MOD ((TT_D64 << 10) | (MEMTYPE << 8) | ADRM_EXT_S_D64)
#define SHIO_MOD ((TT_NORMAL << 10) | (MEMT_SHIO << 8) | ADRM_SHT_N_IO)
#endif /* _MVME328_REG_H_ */