File: [local] / sys / arch / mvme88k / dev / vme.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:37 2008 UTC (16 years, 3 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: vme.c,v 1.46 2007/03/22 18:52:38 miod Exp $ */
/*
* Copyright (c) 2004, Miodrag Vallat.
* Copyright (c) 1999 Steve Murphree, Jr.
* Copyright (c) 1995 Theo de Raadt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/ioctl.h>
#include <sys/proc.h>
#include <sys/uio.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <machine/autoconf.h>
#include <machine/cpu.h>
#include "pcctwo.h"
#include "syscon.h"
#include <mvme88k/dev/vme.h>
#if NSYSCON > 0
#include <machine/mvme188.h>
#include <mvme88k/dev/sysconreg.h>
#endif
int vmematch(struct device *, void *, void *);
void vmeattach(struct device *, struct device *, void *);
void vme2chip_init(struct vmesoftc *);
void vmesyscon_init(struct vmesoftc *);
u_long vme2chip_map(u_long, int);
int vme2abort(void *);
int sysconabort(void *);
int vmeprint(void *, const char *);
int vmebustype;
unsigned int vmevecbase;
struct cfattach vme_ca = {
sizeof(struct vmesoftc), vmematch, vmeattach
};
struct cfdriver vme_cd = {
NULL, "vme", DV_DULL
};
/*
* bus_space routines for VME mappings
*/
int vme_map(bus_addr_t, bus_size_t, int, bus_space_handle_t *);
void vme_unmap(bus_space_handle_t, bus_size_t);
int vme_subregion(bus_space_handle_t, bus_size_t, bus_size_t,
bus_space_handle_t *);
void * vme_vaddr(bus_space_handle_t);
const struct mvme88k_bus_space_tag vme_bustag = {
vme_map,
vme_unmap,
vme_subregion,
vme_vaddr
};
/*
* VME space mapping functions
*/
int
vme_map(bus_addr_t addr, bus_size_t size, int flags, bus_space_handle_t *ret)
{
vaddr_t map;
map = (vaddr_t)mapiodev((paddr_t)addr, size);
if (map == NULL)
return ENOMEM;
*ret = (bus_space_handle_t)map;
return 0;
}
void
vme_unmap(bus_space_handle_t handle, bus_size_t size)
{
unmapiodev((vaddr_t)handle, size);
}
int
vme_subregion(bus_space_handle_t handle, bus_addr_t offset, bus_size_t size,
bus_space_handle_t *ret)
{
*ret = handle + offset;
return (0);
}
void *
vme_vaddr(bus_space_handle_t handle)
{
return (void *)handle;
}
/*
* Extra D16 access functions
*
* D16 cards will trigger bus errors on attempting to read or write more
* than 16 bits on the bus. Given how the m88k processor works, this means
* basically that all long (D32) accesses must be carefully taken care of.
*
* Since the kernels bcopy() and bzero() routines will use 32 bit accesses
* for performance, here are specific D16-compatible routines. They will
* also revert to D8 operations if neither of the operands is properly
* aligned.
*/
void d16_bcopy(const void *, void *, size_t);
void d16_bzero(void *, size_t);
void
d16_bcopy(const void *src, void *dst, size_t len)
{
if ((vaddr_t)src & 1 || (vaddr_t)dst & 1)
bus_space_write_region_1(&vme_bustag, 0, (vaddr_t)dst,
(void *)src, len);
else {
bus_space_write_region_2(&vme_bustag, 0, (vaddr_t)dst,
(void *)src, len / 2);
if (len & 1)
bus_space_write_1(&vme_bustag, 0,
dst + len - 1, *(u_int8_t *)(src + len - 1));
}
}
void
d16_bzero(void *dst, size_t len)
{
if ((vaddr_t)dst & 1)
bus_space_set_region_1(&vme_bustag, 0, (vaddr_t)dst, 0, len);
else {
bus_space_set_region_2(&vme_bustag, 0, (vaddr_t)dst, 0, len / 2);
if (len & 1)
bus_space_write_1(&vme_bustag, 0, dst + len - 1, 0);
}
}
/*
* Configuration glue
*/
int
vmematch(parent, cf, args)
struct device *parent;
void *cf;
void *args;
{
#ifdef MVME187
if (brdtyp == BRD_8120)
return (0);
#endif
return (1);
}
int
vmeprint(args, bus)
void *args;
const char *bus;
{
struct confargs *ca = args;
printf(" addr 0x%x", ca->ca_paddr);
if (ca->ca_ipl > 0)
printf(" ipl %d", ca->ca_ipl);
if (ca->ca_vec > 0)
printf(" vec 0x%x", ca->ca_vec);
return (UNCONF);
}
int
vmescan(parent, child, args, bustype)
struct device *parent;
void *child, *args;
int bustype;
{
struct cfdata *cf = child;
struct confargs oca, *ca = args;
bzero(&oca, sizeof oca);
oca.ca_iot = &vme_bustag;
oca.ca_dmat = ca->ca_dmat;
oca.ca_bustype = bustype;
oca.ca_paddr = cf->cf_loc[0];
oca.ca_vec = cf->cf_loc[1];
oca.ca_ipl = cf->cf_loc[2];
if (oca.ca_ipl > 0 && oca.ca_vec < 0)
oca.ca_vec = vme_findvec(-1);
oca.ca_name = cf->cf_driver->cd_name;
if ((*cf->cf_attach->ca_match)(parent, cf, &oca) == 0)
return (0);
config_attach(parent, cf, &oca, vmeprint);
return (1);
}
void
vmeattach(parent, self, args)
struct device *parent, *self;
void *args;
{
struct vmesoftc *sc = (struct vmesoftc *)self;
struct confargs *ca = args;
/*
* This is a waste if we are attached to SYSCON - but then obio
* mappings are free...
*/
sc->sc_iot = ca->ca_iot;
if (bus_space_map(sc->sc_iot, ca->ca_paddr, PAGE_SIZE, 0,
&sc->sc_ioh) != 0) {
printf(": can't map registers!\n");
return;
}
vmebustype = ca->ca_bustype;
switch (ca->ca_bustype) {
#if NPCCTWO > 0
case BUS_PCCTWO:
{
u_int32_t vbr;
/* Sanity check that the BUG is set up right */
vbr = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_VBR);
vmevecbase = VME2_GET_VBR1(vbr) + 0x10;
if (vmevecbase >= 0x100) {
panic("Correct the VME Vector Base Registers "
"in the Bug ROM.\n"
"Suggested values are 0x60 for VME Vec0 and "
"0x70 for VME Vec1.");
}
if ((bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL) &
VME2_TCTL_SCON) != 0)
printf(": system controller");
printf("\n");
vme2chip_init(sc);
}
break;
#endif
#if NSYSCON > 0
case BUS_SYSCON:
{
u_int8_t sconc;
vmevecbase = 0x60; /* Hard coded for MVME188 */
sconc = *(volatile u_int8_t *)MVME188_GLOBAL1;
if (ISSET(sconc, M188_SYSCON))
printf(": system controller");
printf("\n");
vmesyscon_init(sc);
}
break;
#endif
}
while (config_found(self, NULL, NULL))
;
}
/* find a VME vector based on what is in NVRAM settings. */
int
vme_findvec(int skip)
{
return intr_findvec(vmevecbase, 0xff, skip);
}
/*
* make local addresses 1G-2G correspond to VME addresses 3G-4G,
* as D32
*/
#define VME2_D32STARTPHYS (1*1024*1024*1024UL)
#define VME2_D32ENDPHYS (2*1024*1024*1024UL)
#define VME2_D32STARTVME (3*1024*1024*1024UL)
#define VME2_D32BITSVME (3*1024*1024*1024UL)
/*
* make local addresses 3G-3.75G correspond to VME addresses 3G-3.75G,
* as D16
*/
#define VME2_D16STARTPHYS (3*1024*1024*1024UL)
#define VME2_D16ENDPHYS (3*1024*1024*1024UL + 768*1024*1024UL)
#define VME2_A32D16STARTPHYS (0xff000000UL)
#define VME2_A32D16ENDPHYS (0xff7fffffUL)
/*
* Returns a physical address mapping for a VME address & length.
* Note: on some hardware it is not possible to create certain
* mappings, ie. the MVME147 cannot do 32 bit accesses to VME bus
* addresses from 0 to physmem.
*/
paddr_t
vmepmap(sc, vmeaddr, bustype)
struct device *sc;
off_t vmeaddr;
int bustype;
{
u_int32_t base = (u_int32_t)vmeaddr; /* wrap around 4GB */
switch (vmebustype) {
#if NPCCTWO > 0 || NSYSCON > 0
case BUS_PCCTWO:
case BUS_SYSCON:
switch (bustype) {
case BUS_VMES: /* D16 VME Transfers */
#ifdef DEBUG
printf("base 0x%8llx/0x%8x\n",
vmeaddr, base);
#endif
base = vme2chip_map(base, 16);
#ifdef DEBUG
if (base == NULL) {
printf("%s: cannot map pa 0x%x\n",
sc->dv_xname, base);
}
#endif
break;
case BUS_VMEL: /* D32 VME Transfers */
#ifdef DEBUG
printf("base 0x%8llx/0x%8x\n",
vmeaddr, base);
#endif
base = vme2chip_map(base, 32);
#ifdef DEBUG
if (base == NULL) {
printf("%s: cannot map pa 0x%x\n",
sc->dv_xname, base);
}
#endif
break;
}
break;
#endif
default:
return NULL;
}
return (base);
}
static vaddr_t vmemap(struct vmesoftc *, off_t);
static void vmeunmap(paddr_t);
/* if successful, returns the va of a vme bus mapping */
static __inline__ vaddr_t
vmemap(struct vmesoftc *sc, off_t vmeaddr)
{
paddr_t pa;
pa = vmepmap((struct device *)sc, vmeaddr, BUS_VMES);
if (pa == NULL)
return (NULL);
return mapiodev(pa, PAGE_SIZE);
}
static __inline__ void
vmeunmap(vaddr_t va)
{
unmapiodev(va, PAGE_SIZE);
}
int
vmerw(sc, uio, flags, bus)
struct device *sc;
struct uio *uio;
int flags;
int bus;
{
vaddr_t v;
int c;
struct iovec *iov;
paddr_t vme;
int error = 0;
while (uio->uio_resid > 0 && error == 0) {
iov = uio->uio_iov;
if (iov->iov_len == 0) {
uio->uio_iov++;
uio->uio_iovcnt--;
if (uio->uio_iovcnt < 0)
panic("vmerw");
continue;
}
v = uio->uio_offset;
c = min(iov->iov_len, MAXPHYS);
if ((v & PGOFSET) + c > PAGE_SIZE) /* max 1 page at a time */
c = PAGE_SIZE - (v & PGOFSET);
if (c == 0)
return 0;
vme = vmemap((struct vmesoftc *)sc, v & ~PGOFSET);
if (vme == NULL)
return EACCES;
error = uiomove((void *)vme + (v & PGOFSET), c, uio);
vmeunmap(vme);
}
return error;
}
#ifdef MVME188
/*
* Currently registered VME interrupt vectors for a given IPL, if they
* are unique. Used to help the MVME188 interrupt handler when it's getting
* behind.
*/
u_int vmevec_hints[8] = {
(u_int)-1, (u_int)-1, (u_int)-1, (u_int)-1,
(u_int)-1, (u_int)-1, (u_int)-1, (u_int)-1
};
#endif
/*
* On the VMEbus, only one cpu may be configured to respond to any
* particular vme ipl. Therefore, it wouldn't make sense to globally
* enable all the interrupts all the time -- it would not be possible
* to put two cpu's and one vme card into a single cage. Rather, we
* enable each vme interrupt only when we are attaching a device that
* uses it. This makes it easier (though not trivial) to put two cpu
* cards in one VME cage, and both can have some limited access to vme
* interrupts (just can't share the same irq).
* Obviously no check is made to see if another cpu is using that
* interrupt. If you share you will lose.
*/
int
vmeintr_establish(int vec, struct intrhand *ih, const char *name)
{
struct vmesoftc *sc = (struct vmesoftc *) vme_cd.cd_devs[0];
int rc;
#ifdef DIAGNOSTIC
if (ih->ih_ipl < 1 || ih->ih_ipl > 7)
return (EINVAL);
#endif
switch (vmebustype) {
#if NPCCTWO > 0
case BUS_PCCTWO:
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN,
bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN) |
VME2_IRQ_VME(ih->ih_ipl));
break;
#endif
}
if ((rc = intr_establish(vec, ih, name)) != 0)
return (rc);
#ifdef MVME188
if (vmevec_hints[ih->ih_ipl] == (u_int)-1)
vmevec_hints[ih->ih_ipl] = vec;
else
vmevec_hints[ih->ih_ipl] = (u_int)-1;
#endif
return (0);
}
#if NPCCTWO > 0
void
vme2chip_init(sc)
struct vmesoftc *sc;
{
u_int32_t ctl, irqen, master, master4mod;
/* turn off SYSFAIL LED */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL,
bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL) &
~VME2_TCTL_SYSFAIL);
/*
* Display the VMEChip2 decoder status.
*/
printf("%s: using BUG parameters\n", sc->sc_dev.dv_xname);
ctl = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_GCSRCTL);
if (ctl & VME2_GCSRCTL_MDEN1) {
master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER1);
printf("%s: 1phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n",
sc->sc_dev.dv_xname, master << 16, master & 0xffff0000,
master << 16, master & 0xffff0000);
}
if (ctl & VME2_GCSRCTL_MDEN2) {
master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER2);
printf("%s: 2phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n",
sc->sc_dev.dv_xname, master << 16, master & 0xffff0000,
master << 16, master & 0xffff0000);
}
if (ctl & VME2_GCSRCTL_MDEN3) {
master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER3);
printf("%s: 3phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n",
sc->sc_dev.dv_xname, master << 16, master & 0xffff0000,
master << 16, master & 0xffff0000);
}
if (ctl & VME2_GCSRCTL_MDEN4) {
master = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_MASTER4);
master4mod = bus_space_read_4(sc->sc_iot, sc->sc_ioh,
VME2_MASTER4MOD);
printf("%s: 4phys 0x%08lx-0x%08lx to VME 0x%08lx-0x%08lx\n",
sc->sc_dev.dv_xname, master << 16, master & 0xffff0000,
(master << 16) + (master4mod << 16),
(master & 0xffff0000) + (master4mod & 0xffff0000));
}
/*
* Map the VME irq levels to the cpu levels 1:1.
* This is rather inflexible, but much easier.
*/
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQL4,
(7 << VME2_IRQL4_VME7SHIFT) | (6 << VME2_IRQL4_VME6SHIFT) |
(5 << VME2_IRQL4_VME5SHIFT) | (4 << VME2_IRQL4_VME4SHIFT) |
(3 << VME2_IRQL4_VME3SHIFT) | (2 << VME2_IRQL4_VME2SHIFT) |
(1 << VME2_IRQL4_VME1SHIFT));
printf("%s: vme to cpu irq level 1:1\n",sc->sc_dev.dv_xname);
/* Enable the reset switch */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL, VME2_TCTL_RSWE |
bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCTL));
/* Set Watchdog timeout to about 1 minute */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_TCR, VME2_TCR_64S |
bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_TCR));
/* Enable VMEChip2 Interrupts */
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_VBR, VME2_IOCTL1_MIEN |
bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_VBR));
/*
* Map the Software VME irq levels to the cpu level 7.
*/
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQL3,
(7 << VME2_IRQL3_SW7SHIFT) | (7 << VME2_IRQL3_SW6SHIFT) |
(7 << VME2_IRQL3_SW5SHIFT) | (7 << VME2_IRQL3_SW4SHIFT) |
(7 << VME2_IRQL3_SW3SHIFT) | (7 << VME2_IRQL3_SW2SHIFT) |
(7 << VME2_IRQL3_SW1SHIFT));
/*
* pseudo driver, abort interrupt handler
*/
sc->sc_abih.ih_fn = vme2abort;
sc->sc_abih.ih_arg = 0;
sc->sc_abih.ih_wantframe = 1;
sc->sc_abih.ih_ipl = IPL_NMI;
intr_establish(110, &sc->sc_abih, sc->sc_dev.dv_xname);
irqen = bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN);
irqen |= VME2_IRQ_AB;
/* bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN, irqen); */
/*
* Enable ACFAIL interrupt, but disable Timer 1 interrupt - we
* prefer it without for delay().
*/
irqen = (irqen | VME2_IRQ_ACF) & ~VME2_IRQ_TIC1;
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQEN, irqen);
}
#endif /* NPCCTWO */
#if NSYSCON > 0
void
vmesyscon_init(sc)
struct vmesoftc *sc;
{
u_int32_t ucsr;
/*
* Force a reasonable timeout for VME data transfers.
* We can not disable this, this would cause autoconf to hang
* on the first missing device we'll probe.
*/
ucsr = *(volatile u_int32_t*)MVME188_UCSR;
ucsr = (ucsr & ~VTOSELBITS) | VTO128US;
*(volatile u_int32_t *)MVME188_UCSR = ucsr;
}
#endif /* NSYSCON */
/*
* A32 accesses on the MVME1[6789]x require setting up mappings in
* the VME2 chip.
* XXX VME address must be between 2G and 4G
* XXX We only support D32 at the moment..
* XXX smurph - This is bogus, get rid of it! Should check vme/syscon for offsets.
*/
u_long
vme2chip_map(base, dwidth)
u_long base;
int dwidth;
{
/*
* Since we are checking range for one page only, no need to check
* for address wraparound.
*/
switch (dwidth) {
case 16:
if (base < VME2_D16STARTPHYS ||
base + PAGE_SIZE > VME2_D16ENDPHYS)
return NULL;
break;
case 32:
if (base < VME2_D32STARTPHYS ||
base + PAGE_SIZE > VME2_D32ENDPHYS)
return NULL;
break;
default:
return NULL;
}
return base;
}
#if NPCCTWO > 0
int
vme2abort(eframe)
void *eframe;
{
struct vmesoftc *sc = (struct vmesoftc *)vme_cd.cd_devs[0];
if ((bus_space_read_4(sc->sc_iot, sc->sc_ioh, VME2_IRQSTAT) &
VME2_IRQ_AB) == 0) {
printf("%s: abort irq not set\n", sc->sc_dev.dv_xname);
return (0);
}
bus_space_write_4(sc->sc_iot, sc->sc_ioh, VME2_IRQCLR, VME2_IRQ_AB);
nmihand(eframe);
return (1);
}
#endif