![]() ![]() | ![]() |
File: [local] / sys / arch / mvme88k / dev / nvramreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:37 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: nvramreg.h,v 1.8 2007/04/10 17:47:54 miod Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)clockreg.h 8.1 (Berkeley) 6/11/93 */ /* * mvme1x7 Mostek TOD clock/NVRAM */ /* * Mostek MK48T08 clock. * * This chip is 8k in size. * The first TOD clock starts at offset 0x1FF8. The following structure * describes last 2K of its 8K address space. The first 6K of the NVRAM * space is used for various things as follows: * 0000-0fff User Area * 1000-10ff Networking Area * 1100-16f7 Operating System Area * 16f8-1ef7 ROM Debugger Area * 1ef8-1ff7 Configuration Area (Ethernet address etc) * 1ff8-1fff TOD clock */ /* * On MVME188, these offsets need shifting two bits, as they are 32 bit * registers. */ #define CLK_CSR 0 /* control register */ #define CLK_SEC 1 /* seconds (0..59; BCD) */ #define CLK_MIN 2 /* minutes (0..59; BCD) */ #define CLK_HOUR 3 /* hour (0..23; BCD) */ #define CLK_WDAY 4 /* weekday (1..7) */ #define CLK_DAY 5 /* day in month (1..31; BCD) */ #define CLK_MONTH 6 /* month (1..12; BCD) */ #define CLK_YEAR 7 /* year (0..99; BCD) */ #define CLK_NREG 8 /* csr bits */ #define CLK_WRITE 0x80 /* want to write */ #define CLK_READ 0x40 /* want to read (freeze clock) */ /* * Motorola chose the year `1900' as their base count. It has already * wrapped by now... */ #define YEAR0 00 #define SBC_NVRAM_TOD_OFF 0x1ff8 /* offset of tod in NVRAM space */ #define M188_NVRAM_TOD_OFF 0x1fe0 /* offset of tod in NVRAM space */ #define MK48T02_SIZE 2 * 1024 #define MK48T08_SIZE 8 * 1024