![]() ![]() | ![]() |
File: [local] / sys / arch / mvme88k / conf / files.mvme88k (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:35 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
# $OpenBSD: files.mvme88k,v 1.41 2006/05/02 21:43:07 miod Exp $ # maxpartitions 16 device mainbus {[addr = -1]} attach mainbus at root device bussw {[offset = -1], [ipl = 0]} attach bussw at mainbus file arch/mvme88k/dev/bussw.c bussw needs-count device pcctwo {[offset = -1], [ipl = 0]} attach pcctwo at bussw, mainbus file arch/mvme88k/dev/pcctwo.c pcctwo needs-count device syscon {[offset = -1], [ipl = 0]} attach syscon at mainbus file arch/mvme88k/dev/syscon.c syscon needs-count device memc attach memc at pcctwo file arch/mvme88k/dev/memc.c memc device sram attach sram at mainbus file arch/mvme88k/dev/sram.c sram needs-count device nvram attach nvram at pcctwo, syscon file arch/mvme88k/dev/nvram.c nvram needs-count device cl: tty attach cl at pcctwo file arch/mvme88k/dev/cl.c cl needs-count device dart: tty attach dart at syscon file arch/mvme88k/dev/dart.c dart needs-count include "../../../scsi/files.scsi" major {sd = 4} major {st = 5} major {cd = 6} major {rd = 7} major {vnd = 8} attach osiop at pcctwo with osiop_pcctwo file arch/mvme88k/dev/osiop_pcctwo.c osiop_pcctwo device vme {} attach vme at pcctwo, syscon device vmes {[addr = -1], [vec = -1], [ipl = 0]} attach vmes at vme device vmel {[addr = -1], [vec = -1], [ipl = 0]} attach vmel at vme file arch/mvme88k/dev/vme.c vme | vmes | vmel file arch/mvme88k/dev/vmes.c vmes needs-count file arch/mvme88k/dev/vmel.c vmel needs-count # list of standard files file dev/cninit.c file arch/mvme88k/mvme88k/autoconf.c file arch/mvme88k/mvme88k/bus_dma.c file arch/mvme88k/mvme88k/clock.c file arch/mvme88k/mvme88k/conf.c file arch/mvme88k/mvme88k/db_machdep.c ddb file arch/mvme88k/mvme88k/disksubr.c file arch/mvme88k/mvme88k/eh.S file arch/mvme88k/mvme88k/machdep.c file arch/mvme88k/mvme88k/m187_machdep.c mvme187 file arch/mvme88k/mvme88k/m188_machdep.c mvme188 file arch/mvme88k/mvme88k/m197_machdep.c mvme197 file arch/mvme88k/mvme88k/m1x7_machdep.c mvme187 | mvme197 file arch/mvme88k/mvme88k/m88110.c m88110 file arch/mvme88k/mvme88k/m8820x.c m88100 file arch/mvme88k/mvme88k/m88410.c m88110 file arch/mvme88k/mvme88k/mem.c file arch/mvme88k/mvme88k/pmap_bootstrap.c file arch/mvme88k/mvme88k/pmap_table.c file arch/mvme88k/dev/bugio.c file arch/mvme88k/dev/mainbus.c file arch/mvme88k/dev/memdevs.c nvram | sram attach ie at pcctwo: ifnet, ether file arch/mvme88k/dev/if_ie.c ie attach le at vmes file arch/mvme88k/dev/if_le.c le #device vp: ether, ifnet, ifmedia #attach vp at vmes #file arch/mvme88k/dev/if_vp.c vp device vx: tty attach vx at vmes file arch/mvme88k/dev/vx.c vx needs-count device vs: scsi attach vs at vmes file arch/mvme88k/dev/vs.c vs