![]() ![]() | ![]() |
File: [local] / sys / arch / mips64 / include / regnum.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:07:31 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: regnum.h,v 1.3 2004/08/10 20:28:13 deraadt Exp $ */ /* * Copyright (c) 2001-2002 Opsycon AB (www.opsycon.se / www.opsycon.com) * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #ifndef _MIPS64_REGNUM_H_ #define _MIPS64_REGNUM_H_ /* * Location of the saved registers relative to ZERO. * Usage is p->p_regs[XX]. */ #define ZERO 0 #define AST 1 #define V0 2 #define V1 3 #define A0 4 #define A1 5 #define A2 6 #define A3 7 #define T0 8 #define T1 9 #define T2 10 #define T3 11 #define T4 12 #define T5 13 #define T6 14 #define T7 15 #define S0 16 #define S1 17 #define S2 18 #define S3 19 #define S4 20 #define S5 21 #define S6 22 #define S7 23 #define T8 24 #define T9 25 #define K0 26 #define K1 27 #define GP 28 #define SP 29 #define S8 30 #define RA 31 #define SR 32 #define PS SR /* alias for SR */ #define MULLO 33 #define MULHI 34 #define BADVADDR 35 #define CAUSE 36 #define PC 37 #define IC 38 #define CPL 39 #define NUMSAVEREGS 40 /* Number of registers saved in trap */ #define FPBASE NUMSAVEREGS #define F0 (FPBASE+0) #define F1 (FPBASE+1) #define F2 (FPBASE+2) #define F3 (FPBASE+3) #define F4 (FPBASE+4) #define F5 (FPBASE+5) #define F6 (FPBASE+6) #define F7 (FPBASE+7) #define F8 (FPBASE+8) #define F9 (FPBASE+9) #define F10 (FPBASE+10) #define F11 (FPBASE+11) #define F12 (FPBASE+12) #define F13 (FPBASE+13) #define F14 (FPBASE+14) #define F15 (FPBASE+15) #define F16 (FPBASE+16) #define F17 (FPBASE+17) #define F18 (FPBASE+18) #define F19 (FPBASE+19) #define F20 (FPBASE+20) #define F21 (FPBASE+21) #define F22 (FPBASE+22) #define F23 (FPBASE+23) #define F24 (FPBASE+24) #define F25 (FPBASE+25) #define F26 (FPBASE+26) #define F27 (FPBASE+27) #define F28 (FPBASE+28) #define F29 (FPBASE+29) #define F30 (FPBASE+30) #define F31 (FPBASE+31) #define FSR (FPBASE+32) #define NUMFPREGS 33 #define NREGS (NUMSAVEREGS + NUMFPREGS) #endif /* !_MIPS64_REGNUM_H_ */