Return to i2sreg.h CVS log | Up to [local] / sys / arch / macppc / dev |
File: [local] / sys / arch / macppc / dev / i2sreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:07:30 2008 UTC (16 years, 4 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: i2sreg.h,v 1.2 2007/04/21 15:48:22 gwk Exp $ */ /*- * Copyright (c) 2002 Tsubai Masanari. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* I2S registers */ #define I2S_INT 0x00 #define I2S_FORMAT 0x10 #define I2S_FRAMECOUNT 0x40 #define I2S_FRAMEMATCH 0x50 #define I2S_WORDSIZE 0x60 /* I2S_INT register definitions */ #define I2SClockOffset 0x3c #define I2S_INT_CLKSTOPPEND 0x01000000 /* FCR(0x3c) bits */ #define I2S0CLKEN 0x1000 #define I2S0EN 0x2000 #define I2S1CLKEN 0x080000 #define I2S1EN 0x100000 #define CLKSRC_49MHz 0x80000000 /* Use 49152000Hz Osc. */ #define CLKSRC_45MHz 0x40000000 /* Use 45158400Hz Osc. */ #define CLKSRC_18MHz 0x00000000 /* Use 18432000Hz Osc. */ #define CLKSRC_VS 0x01fa0000 /* Magic value of xserve vu-meter */ #define MCLK_DIV 0x1f000000 /* MCLK = SRC / DIV */ #define MCLK_DIV1 0x14000000 /* MCLK = SRC */ #define MCLK_DIV3 0x13000000 /* MCLK = SRC / 3 */ #define MCLK_DIV5 0x12000000 /* MCLK = SRC / 5 */ #define SCLK_DIV 0x00f00000 /* SCLK = MCLK / DIV */ #define SCLK_DIV1 0x00800000 #define SCLK_DIV3 0x00900000 #define SCLK_MASTER 0x00080000 /* Master mode */ #define SCLK_SLAVE 0x00000000 /* Slave mode */ #define SERIAL_FORMAT 0x00070000 #define SERIAL_SONY 0x00000000 #define SERIAL_64x 0x00010000 #define SERIAL_32x 0x00020000 #define SERIAL_DAV 0x00040000 #define SERIAL_SILICON 0x00050000