[BACK]Return to m88110_fp.S CVS log [TXT][DIR] Up to [local] / sys / arch / m88k / m88k

File: [local] / sys / arch / m88k / m88k / m88110_fp.S (download)

Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:07:11 2008 UTC (16 years, 3 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD
Changes since 1.1: +0 -0 lines

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/* $OpenBSD: m88110_fp.S,v 1.2 2004/08/09 20:52:11 miod Exp $	*/
/*
 * Copyright (c) 1999 Steve Murphree, Jr.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Christopher G. Demetriou.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/* Floating point trouble routines */
/*
 * August 1, 1999
 * smurph@OpenBSD.org
 *
 * Additions to support MVME197 (mc88110) mmu routines.
 */

/*
 * This is cheesy.  I'm using the TCFP features of the mc88110
 * because it was easy.  It is not 100% IEEE.  But it may be
 * close enough.  We shall see...  XXXsmurph
 * Err... TCFP == "Time Critical Floating Point"
 *
 * The only two SFU1 exceptions that can occure in TCFP mode are:
 * 1) Unimplemented Floating Point Instruction
 * 2) Floating Point Privilege Violation
 */

#include "assym.h"
#include <machine/trap.h>
#include <machine/asm.h>

ASENTRY(m88110_Xfp_precise)
	or	r29, r3, r0     /*  r29 is now the E.F. */
	subu	r31, r31, 16
	st	r1,  r31, 0
	st	r29, r31, 4

	ld	r2, r29, EF_FPSR * 4
	ld	r3, r29, EF_FPCR * 4
	ld	r4, r29, EF_FPECR * 4

	/*
	 * Load into r1 the return address for the 0 handlers.  Looking
	 * at FPECR, branch to the appropriate 0 handler.  However,
	 * if none of the 0 bits are enabled, then a floating point
	 * instruction was issued with the floating point unit disabled.  This
	 * will cause an unimplemented opcode 0.
	 */

   	bb0	6,r4, 2f   	/* branch to m88110_FPunimp if bit set */
     	br	_ASM_LABEL(m88110_FPuimp)
2:  	bb0	5,r4, 3f 	/* branch to m88110_FPpriviol if bit set */
	br	_ASM_LABEL(m88110_FPpriviol)
3:
	or.u	r4, r4, 0xffff

ASLOCAL(m88110_FPuimp)
	subu	r31,r31,16		/* allocate stack */
	st	r1,r31,4		/* save return address */
	st	r3,r31,0		/* save exception frame */
	or	r2,r0,T_FPEPFLT		/* load trap type */
	bsr.n	_C_LABEL(m88110_trap)	/* trap */
	 or	r3, r29, r0
	ld	r1,r31,4		/* recover return address */
 	jmp.n	r1
	 addu	r31,r31,16		/* deallocate stack */

ASLOCAL(m88110_FPpriviol)
	subu	r31,r31,16		/* allocate stack */
	st	r1,r31,4		/* save return address */
	st	r3,r31,0		/* save exception frame */
	or	r2,r0,T_PRIVINFLT	/* load trap type */
	bsr.n	_C_LABEL(m88110_trap)	/* trap */
	 or	r3, r29, r0
	ld	r1,r31,4		/* recover return address */
 	jmp.n	r1
	 addu	r31,r31,16		/* deallocate stack */

ENTRY(set_tcfp)
	or.u	r2, r0, hi16(0x200000)
	or	r2, r2, lo16(0x200000)
	jmp.n	r1
	 fstcr	r2, fcr0