Annotation of sys/arch/m68k/fpsp/x_store.sa, Revision 1.1.1.1
1.1 nbrk 1: * $OpenBSD: x_store.sa,v 1.2 1996/05/29 21:05:49 niklas Exp $
2: * $NetBSD: x_store.sa,v 1.3 1994/10/26 07:50:29 cgd Exp $
3:
4: * MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
5: * M68000 Hi-Performance Microprocessor Division
6: * M68040 Software Package
7: *
8: * M68040 Software Package Copyright (c) 1993, 1994 Motorola Inc.
9: * All rights reserved.
10: *
11: * THE SOFTWARE is provided on an "AS IS" basis and without warranty.
12: * To the maximum extent permitted by applicable law,
13: * MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
14: * INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
15: * PARTICULAR PURPOSE and any warranty against infringement with
16: * regard to the SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF)
17: * and any accompanying written materials.
18: *
19: * To the maximum extent permitted by applicable law,
20: * IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
21: * (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
22: * PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR
23: * OTHER PECUNIARY LOSS) ARISING OF THE USE OR INABILITY TO USE THE
24: * SOFTWARE. Motorola assumes no responsibility for the maintenance
25: * and support of the SOFTWARE.
26: *
27: * You are hereby granted a copyright license to use, modify, and
28: * distribute the SOFTWARE so long as this entire notice is retained
29: * without alteration in any modified and/or redistributed versions,
30: * and that such modified versions are clearly identified as such.
31: * No licenses are granted by implication, estoppel or otherwise
32: * under any patents or trademarks of Motorola, Inc.
33:
34: *
35: * x_store.sa 3.2 1/24/91
36: *
37: * store --- store operand to memory or register
38: *
39: * Used by underflow and overflow handlers.
40: *
41: * a6 = points to fp value to be stored.
42: *
43:
44: X_STORE IDNT 2,1 Motorola 040 Floating Point Software Package
45:
46: section 8
47:
48: fpreg_mask:
49: dc.b $80,$40,$20,$10,$08,$04,$02,$01
50:
51: include fpsp.h
52:
53: xref mem_write
54: xref get_fline
55: xref g_opcls
56: xref g_dfmtou
57: xref reg_dest
58:
59: xdef dest_ext
60: xdef dest_dbl
61: xdef dest_sgl
62:
63: xdef store
64: store:
65: btst.b #E3,E_BYTE(a6)
66: beq.b E1_sto
67: E3_sto:
68: move.l CMDREG3B(a6),d0
69: bfextu d0{6:3},d0 ;isolate dest. reg from cmdreg3b
70: sto_fp:
71: lea fpreg_mask,a1
72: move.b (a1,d0.w),d0 ;convert reg# to dynamic register mask
73: tst.b LOCAL_SGN(a0)
74: beq.b is_pos
75: bset.b #sign_bit,LOCAL_EX(a0)
76: is_pos:
77: fmovem.x (a0),d0 ;move to correct register
78: *
79: * if fp0-fp3 is being modified, we must put a copy
80: * in the USER_FPn variable on the stack because all exception
81: * handlers restore fp0-fp3 from there.
82: *
83: cmp.b #$80,d0
84: bne.b not_fp0
85: fmovem.x fp0,USER_FP0(a6)
86: rts
87: not_fp0:
88: cmp.b #$40,d0
89: bne.b not_fp1
90: fmovem.x fp1,USER_FP1(a6)
91: rts
92: not_fp1:
93: cmp.b #$20,d0
94: bne.b not_fp2
95: fmovem.x fp2,USER_FP2(a6)
96: rts
97: not_fp2:
98: cmp.b #$10,d0
99: bne.b not_fp3
100: fmovem.x fp3,USER_FP3(a6)
101: rts
102: not_fp3:
103: rts
104:
105: E1_sto:
106: bsr.l g_opcls ;returns opclass in d0
107: cmpi.b #3,d0
108: beq opc011 ;branch if opclass 3
109: move.l CMDREG1B(a6),d0
110: bfextu d0{6:3},d0 ;extract destination register
111: bra.b sto_fp
112:
113: opc011:
114: bsr.l g_dfmtou ;returns dest format in d0
115: * ;ext=00, sgl=01, dbl=10
116: move.l a0,a1 ;save source addr in a1
117: move.l EXC_EA(a6),a0 ;get the address
118: tst.l d0 ;if dest format is extended
119: beq.w dest_ext ;then branch
120: cmpi.l #1,d0 ;if dest format is single
121: beq.b dest_sgl ;then branch
122: *
123: * fall through to dest_dbl
124: *
125:
126: *
127: * dest_dbl --- write double precision value to user space
128: *
129: *Input
130: * a0 -> destination address
131: * a1 -> source in extended precision
132: *Output
133: * a0 -> destroyed
134: * a1 -> destroyed
135: * d0 -> 0
136: *
137: *Changes extended precision to double precision.
138: * Note: no attempt is made to round the extended value to double.
139: * dbl_sign = ext_sign
140: * dbl_exp = ext_exp - $3fff(ext bias) + $7ff(dbl bias)
141: * get rid of ext integer bit
142: * dbl_mant = ext_mant{62:12}
143: *
144: * --------------- --------------- ---------------
145: * extended -> |s| exp | |1| ms mant | | ls mant |
146: * --------------- --------------- ---------------
147: * 95 64 63 62 32 31 11 0
148: * | |
149: * | |
150: * | |
151: * v v
152: * --------------- ---------------
153: * double -> |s|exp| mant | | mant |
154: * --------------- ---------------
155: * 63 51 32 31 0
156: *
157: dest_dbl:
158: clr.l d0 ;clear d0
159: move.w LOCAL_EX(a1),d0 ;get exponent
160: sub.w #$3fff,d0 ;subtract extended precision bias
161: cmp.w #$4000,d0 ;check if inf
162: beq.b inf ;if so, special case
163: add.w #$3ff,d0 ;add double precision bias
164: swap d0 ;d0 now in upper word
165: lsl.l #4,d0 ;d0 now in proper place for dbl prec exp
166: tst.b LOCAL_SGN(a1)
167: beq.b get_mant ;if postive, go process mantissa
168: bset.l #31,d0 ;if negative, put in sign information
169: * ; before continuing
170: bra.b get_mant ;go process mantissa
171: inf:
172: move.l #$7ff00000,d0 ;load dbl inf exponent
173: clr.l LOCAL_HI(a1) ;clear msb
174: tst.b LOCAL_SGN(a1)
175: beq.b dbl_inf ;if positive, go ahead and write it
176: bset.l #31,d0 ;if negative put in sign information
177: dbl_inf:
178: move.l d0,LOCAL_EX(a1) ;put the new exp back on the stack
179: bra.b dbl_wrt
180: get_mant:
181: move.l LOCAL_HI(a1),d1 ;get ms mantissa
182: bfextu d1{1:20},d1 ;get upper 20 bits of ms
183: or.l d1,d0 ;put these bits in ms word of double
184: move.l d0,LOCAL_EX(a1) ;put the new exp back on the stack
185: move.l LOCAL_HI(a1),d1 ;get ms mantissa
186: move.l #21,d0 ;load shift count
187: lsl.l d0,d1 ;put lower 11 bits in upper bits
188: move.l d1,LOCAL_HI(a1) ;build lower lword in memory
189: move.l LOCAL_LO(a1),d1 ;get ls mantissa
190: bfextu d1{0:21},d0 ;get ls 21 bits of double
191: or.l d0,LOCAL_HI(a1) ;put them in double result
192: dbl_wrt:
193: move.l #$8,d0 ;byte count for double precision number
194: exg a0,a1 ;a0=supervisor source, a1=user dest
195: bsr.l mem_write ;move the number to the user's memory
196: rts
197: *
198: * dest_sgl --- write single precision value to user space
199: *
200: *Input
201: * a0 -> destination address
202: * a1 -> source in extended precision
203: *
204: *Output
205: * a0 -> destroyed
206: * a1 -> destroyed
207: * d0 -> 0
208: *
209: *Changes extended precision to single precision.
210: * sgl_sign = ext_sign
211: * sgl_exp = ext_exp - $3fff(ext bias) + $7f(sgl bias)
212: * get rid of ext integer bit
213: * sgl_mant = ext_mant{62:12}
214: *
215: * --------------- --------------- ---------------
216: * extended -> |s| exp | |1| ms mant | | ls mant |
217: * --------------- --------------- ---------------
218: * 95 64 63 62 40 32 31 12 0
219: * | |
220: * | |
221: * | |
222: * v v
223: * ---------------
224: * single -> |s|exp| mant |
225: * ---------------
226: * 31 22 0
227: *
228: dest_sgl:
229: clr.l d0
230: move.w LOCAL_EX(a1),d0 ;get exponent
231: sub.w #$3fff,d0 ;subtract extended precision bias
232: cmp.w #$4000,d0 ;check if inf
233: beq.b sinf ;if so, special case
234: add.w #$7f,d0 ;add single precision bias
235: swap d0 ;put exp in upper word of d0
236: lsl.l #7,d0 ;shift it into single exp bits
237: tst.b LOCAL_SGN(a1)
238: beq.b get_sman ;if positive, continue
239: bset.l #31,d0 ;if negative, put in sign first
240: bra.b get_sman ;get mantissa
241: sinf:
242: move.l #$7f800000,d0 ;load single inf exp to d0
243: tst.b LOCAL_SGN(a1)
244: beq.b sgl_wrt ;if positive, continue
245: bset.l #31,d0 ;if negative, put in sign info
246: bra.b sgl_wrt
247:
248: get_sman:
249: move.l LOCAL_HI(a1),d1 ;get ms mantissa
250: bfextu d1{1:23},d1 ;get upper 23 bits of ms
251: or.l d1,d0 ;put these bits in ms word of single
252:
253: sgl_wrt:
254: move.l d0,L_SCR1(a6) ;put the new exp back on the stack
255: move.l #$4,d0 ;byte count for single precision number
256: tst.l a0 ;users destination address
257: beq.b sgl_Dn ;destination is a data register
258: exg a0,a1 ;a0=supervisor source, a1=user dest
259: lea.l L_SCR1(a6),a0 ;point a0 to data
260: bsr.l mem_write ;move the number to the user's memory
261: rts
262: sgl_Dn:
263: bsr.l get_fline ;returns fline word in d0
264: and.w #$7,d0 ;isolate register number
265: move.l d0,d1 ;d1 has size:reg formatted for reg_dest
266: or.l #$10,d1 ;reg_dest wants size added to reg#
267: bra.l reg_dest ;size is X, rts in reg_dest will
268: * ;return to caller of dest_sgl
269:
270: dest_ext:
271: tst.b LOCAL_SGN(a1) ;put back sign into exponent word
272: beq.b dstx_cont
273: bset.b #sign_bit,LOCAL_EX(a1)
274: dstx_cont:
275: clr.b LOCAL_SGN(a1) ;clear out the sign byte
276:
277: move.l #$0c,d0 ;byte count for extended number
278: exg a0,a1 ;a0=supervisor source, a1=user dest
279: bsr.l mem_write ;move the number to the user's memory
280: rts
281:
282: end
CVSweb