Return to files.landisk CVS log | Up to [local] / sys / arch / landisk / conf |
File: [local] / sys / arch / landisk / conf / files.landisk (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:08:56 2008 UTC (16 years, 4 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
# $OpenBSD: files.landisk,v 1.6 2007/06/08 22:57:43 jasper Exp $ # $NetBSD: files.landisk,v 1.2 2006/09/07 01:55:02 uwe Exp $ # maxpartitions must be first item in files.${MACHINE} maxpartitions 16 maxusers 2 16 64 major {wd = 16} major {rd = 18} major {sd = 24} #defparam opt_memsize.h IOM_ROM_BEGIN IOM_ROM_SIZE IOM_RAM_BEGIN IOM_RAM_SIZE file arch/landisk/landisk/autoconf.c file arch/landisk/landisk/bus_dma.c file arch/landisk/landisk/clock_machdep.c file arch/landisk/landisk/conf.c file arch/landisk/landisk/consinit.c file arch/landisk/landisk/disksubr.c disk file arch/landisk/landisk/intr.c file arch/landisk/landisk/machdep.c # # System bus types # define mainbus {} device mainbus: pcibus, mainbus attach mainbus at root file arch/landisk/landisk/mainbus.c mainbus device cpu attach cpu at mainbus file arch/sh/sh/cpu.c cpu # # Machine-independent SCSI drivers # include "scsi/files.scsi" # # Machine-independent ATA drivers # include "dev/ata/files.ata" include "dev/atapiscsi/files.atapiscsi" # # Machine-independent I2O drivers # include "dev/i2o/files.i2o" #include "dev/wscons/files.wscons" #include "dev/wsfont/files.wsfont" #include "dev/rasops/files.rasops" # # PCI bus # include "dev/mii/files.mii" include "dev/pci/files.pci" include "arch/sh/conf/files.shpcic" file arch/landisk/landisk/shpcic_machdep.c shpcic # WSCONS bits for wskbd.h # include "dev/wscons/files.wscons" # # USB drivers # include "dev/usb/files.usb" # # Bluetooth # include "dev/bluetooth/files.bluetooth" # # SH bus # include "arch/sh/conf/files.shb" # Ricoh RS5C313 Real Time Clock device rsclock attach rsclock at shb file arch/landisk/dev/rs5c313.c rsclock # # on-board I/O bus # define obio { [port = -1], [size = 0], [iomem = -1], [iosiz = 0], [irq = -1] } device obio: obio attach obio at mainbus file arch/landisk/dev/obio.c obio needs-flag attach wdc at obio with wdc_obio file arch/landisk/dev/wdc_obio.c wdc_obio needs-flag define button file arch/landisk/dev/button.c button device btn: button attach btn at obio with btn_obio file arch/landisk/dev/btn_obio.c btn_obio needs-flag device power attach power at obio file arch/landisk/dev/power.c power needs-flag #device led #attach led at obio #file arch/landisk/dev/led_obio.c led needs-flag