Return to files.jornada CVS log

Up to [local] / sys / arch / jornada / conf

Sync up my latest modifications related to OpenBSD/jornada.
At this point PCMCIA is not done (this is primary goal since it's only
expansion bus for SA-1110) but some other chip subsystems rather work.
One of most recent problems sit in ported NetBSD pcic driver. It cause memory
abort passing odd addr to bus_space_write_2 (APB transactions are word-wide,
but I try to emulate 2-bytes accesses in bus_space_map for sa1111).
Other problematic/untested areas: sacic, saic. UART driver is a stub and not
really useful.
But even with this problems I have overdone my plans with this porting effort.

#	$OpenBSD: files.armish,v 1.11 2007/06/08 22:57:42 jasper Exp $

maxpartitions   16
maxusers	2 8 64

major	{wd = 16}
major	{sd = 24}
major	{cd = 26}
major	{rd = 18}

file	arch/arm/arm/conf.c
file	arch/jornada/jornada/jornada_machdep.c

file	arch/jornada/jornada/autoconf.c
file	arch/arm/arm/disksubr.c				disk

include "../../../scsi/files.scsi"

# Use the generic ARM soft interrupt code.
#file	arch/arm/arm/softintr.c
#file	arch/arm/arm/irq_dispatch.S

include "dev/i2c/files.i2c"

# Machine-independent I2O drivers.
#include "dev/i2o/files.i2o"

# StrongARM 1110 files
include "arch/arm/sa11x0/files.sa11x0"
# StrongARM 1111 (companion chip)
include "arch/arm/sa11x0/files.sa11x1"

# XXX SPI should be moved into MI subtree
define	spibus {}
device	spibus
attach	spibus at sassp
file	dev/spi.c

# XXX MCU
device	jmcu: wskbddev
attach	jmcu at spibus
file	arch/jornada/dev/jmcu.c

# dummy fb
device	jfb: wsemuldisplaydev, rasops16, rasops8, rasops4
attach	jfb at saip
file	arch/jornada/dev/jfb.c				jfb	needs-count

# PCMCIA
attach	sacpcic at sacc with sacpcic_jornada
file	arch/jornada/dev/sacpcic_jornada.c			sacpcic_jornada


#
# Machine-independent ATA drivers
#
include "dev/ata/files.ata"

# Include WSCONS stuff
include "dev/wscons/files.wscons"
include "dev/rasops/files.rasops"
include "dev/wsfont/files.wsfont"

# Include USB stuff
include "dev/usb/files.usb"


# Include PCMCIA stuff
include "../../../dev/pcmcia/files.pcmcia"

# ATAPI<->SCSI
include "../../../dev/atapiscsi/files.atapiscsi"


#
# Machine-independent GPIO drivers
#
include "dev/gpio/files.gpio"

#
# Machine-independent 1-Wire drivers
#
#include "dev/onewire/files.onewire"