Return to files.jornada CVS log | Up to [local] / sys / arch / jornada / conf |
File: [local] / sys / arch / jornada / conf / files.jornada (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:09:00 2008 UTC (16 years, 3 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
# $OpenBSD: files.armish,v 1.11 2007/06/08 22:57:42 jasper Exp $ maxpartitions 16 maxusers 2 8 64 major {wd = 16} major {sd = 24} major {cd = 26} major {rd = 18} file arch/arm/arm/conf.c file arch/jornada/jornada/jornada_machdep.c file arch/jornada/jornada/autoconf.c file arch/arm/arm/disksubr.c disk include "../../../scsi/files.scsi" # Use the generic ARM soft interrupt code. #file arch/arm/arm/softintr.c #file arch/arm/arm/irq_dispatch.S include "dev/i2c/files.i2c" # Machine-independent I2O drivers. #include "dev/i2o/files.i2o" # StrongARM 1110 files include "arch/arm/sa11x0/files.sa11x0" # StrongARM 1111 (companion chip) include "arch/arm/sa11x0/files.sa11x1" # XXX SPI should be moved into MI subtree define spibus {} device spibus attach spibus at sassp file dev/spi.c # XXX MCU #device jmcu: wskbddev #attach jmcu at spibus #file arch/jornada/dev/jmcu.c # dummy fb device jfb: wsemuldisplaydev, rasops16, rasops8, rasops4 attach jfb at saip file arch/jornada/dev/jfb.c jfb needs-count # # Machine-independent ATA drivers # include "dev/ata/files.ata" # Include WSCONS stuff include "dev/wscons/files.wscons" include "dev/rasops/files.rasops" include "dev/wsfont/files.wsfont" # Include USB stuff include "dev/usb/files.usb" # Include PCMCIA stuff include "../../../dev/pcmcia/files.pcmcia" # ATAPI<->SCSI include "../../../dev/atapiscsi/files.atapiscsi" # # Machine-independent GPIO drivers # include "dev/gpio/files.gpio" # # Machine-independent 1-Wire drivers # #include "dev/onewire/files.onewire"