[BACK]Return to unixsys.S CVS log [TXT][DIR] Up to [local] / sys / arch / i386 / stand / libsa

File: [local] / sys / arch / i386 / stand / libsa / unixsys.S (download)

Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:06:04 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD
Changes since 1.1: +0 -0 lines

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/*	$OpenBSD: unixsys.S,v 1.4 2004/01/13 23:54:07 millert Exp $	*/

/*
 * Copyright (c) 1997 Michael Shalayeff
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

#include <machine/asm.h>
#include <sys/syscall.h>


#ifdef __STDC__
#define RSYSCALL(x) \
	ENTRY(u##x); \
		movl	 $(SYS_##x), %eax; \
		jmp	 1f
#else
#define RSYSCALL(x) \
	ENTRY(u/**/x); \
		movl	 $(SYS_/**/x), %eax; \
		jmp	 1f
#endif

	.globl	_errno

RSYSCALL(open)
RSYSCALL(read)
RSYSCALL(write)
RSYSCALL(ioctl)
RSYSCALL(close)
RSYSCALL(exit)

1:
	int	$0x80
2:	jnc	3f
	movl	%eax, _errno
	movl	$-1, %eax
	movl	$-1, %edx
3:	ret

ENTRY(__syscall)
	movl	$(SYS___syscall), %eax
	jmp	1b

ENTRY(syscall)
	popl	%ecx	/* rta */
	popl	%eax	/* syscall number */
	pushl	%ecx
	int	$0x80
	pushl	%ecx
	jmp	2b