File: [local] / sys / arch / i386 / pci / opti82c558reg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:06:05 2008 UTC (16 years, 4 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: opti82c558reg.h,v 1.3 2000/03/28 03:37:59 mickey Exp $ */
/* $NetBSD: opti82c558reg.h,v 1.1 1999/11/17 01:21:20 thorpej Exp $ */
/*
* Copyright (c) 1999, by UCHIYAMA Yasushi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the developer may NOT be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Register definitions for the Opti 82c558 PCI-ISA bridge interrupt
* controller.
*/
/*
* PCI IRQ Select Register
*/
#define VIPER_CFG_PIRQ 0x40 /* PCI configuration space */
/*
* Trigger setting:
*
* [1:7]=>5,9,10,11,12,14,15 Edge = 0 Level = 1
*/
#define VIPER_CFG_TRIGGER_SHIFT 16
#define VIPER_LEGAL_LINK(link) ((link) >= 0 && (link) <= 3)
#define VIPER_PIRQ_MASK 0xde20
#define VIPER_LEGAL_IRQ(irq) ((irq) >= 0 && (irq) <= 15 && \
((1 << (irq)) & VIPER_PIRQ_MASK) != 0)
#define VIPER_PIRQ_NONE 0
#define VIPER_PIRQ_5 1
#define VIPER_PIRQ_9 2
#define VIPER_PIRQ_10 3
#define VIPER_PIRQ_11 4
#define VIPER_PIRQ_12 5
#define VIPER_PIRQ_14 6
#define VIPER_PIRQ_15 7
#define VIPER_PIRQ_SELECT_MASK 0x07
#define VIPER_PIRQ_SELECT_SHIFT 3
#define VIPER_PIRQ(reg, x) (((reg) >> ((x) * VIPER_PIRQ_SELECT_SHIFT)) \
& VIPER_PIRQ_SELECT_MASK)