File: [local] / sys / arch / i386 / i386 / linux_machdep.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:06:23 2008 UTC (16 years, 3 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: linux_machdep.c,v 1.34 2007/02/14 00:53:47 jsg Exp $ */
/* $NetBSD: linux_machdep.c,v 1.29 1996/05/03 19:42:11 christos Exp $ */
/*
* Copyright (c) 1995 Frank van der Linden
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project
* by Frank van der Linden
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/signalvar.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <sys/buf.h>
#include <sys/reboot.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/msgbuf.h>
#include <sys/mount.h>
#include <sys/vnode.h>
#include <sys/device.h>
#include <sys/sysctl.h>
#include <sys/syscallargs.h>
#include <sys/filedesc.h>
#include <compat/linux/linux_types.h>
#include <compat/linux/linux_signal.h>
#include <compat/linux/linux_syscallargs.h>
#include <compat/linux/linux_util.h>
#include <compat/linux/linux_ioctl.h>
#include <machine/cpu.h>
#include <machine/cpufunc.h>
#include <machine/psl.h>
#include <machine/reg.h>
#include <machine/segments.h>
#include <machine/specialreg.h>
#include <machine/sysarch.h>
#include <machine/vm86.h>
#include <machine/linux_machdep.h>
/*
* To see whether wsdisplay is configured (for virtual console ioctl calls).
*/
#include "wsdisplay.h"
#include <sys/ioctl.h>
#if NWSDISPLAY > 0 && defined(WSDISPLAY_COMPAT_USL)
#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wsdisplay_usl_io.h>
#endif
#ifdef USER_LDT
#include <machine/cpu.h>
int linux_read_ldt(struct proc *, struct linux_sys_modify_ldt_args *,
register_t *);
int linux_write_ldt(struct proc *, struct linux_sys_modify_ldt_args *,
register_t *);
#endif
/*
* Deal with some i386-specific things in the Linux emulation code.
* This means just signals for now, will include stuff like
* I/O map permissions and V86 mode sometime.
*/
/*
* Send an interrupt to process.
*
* Stack is set up to allow sigcode stored
* in u. to call routine, followed by kcall
* to sigreturn routine below. After sigreturn
* resets the signal mask, the stack, and the
* frame pointer, it returns to the user
* specified pc, psl.
*/
void
linux_sendsig(sig_t catcher, int sig, int mask, u_long code, int type,
union sigval val)
{
struct proc *p = curproc;
struct trapframe *tf;
struct linux_sigframe *fp, frame;
struct sigacts *psp = p->p_sigacts;
int oonstack;
tf = p->p_md.md_regs;
oonstack = psp->ps_sigstk.ss_flags & SS_ONSTACK;
/*
* Allocate space for the signal handler context.
*/
if ((psp->ps_flags & SAS_ALTSTACK) && !oonstack &&
(psp->ps_sigonstack & sigmask(sig))) {
fp = (struct linux_sigframe *)((char *)psp->ps_sigstk.ss_sp +
psp->ps_sigstk.ss_size - sizeof(struct linux_sigframe));
psp->ps_sigstk.ss_flags |= SS_ONSTACK;
} else {
fp = (struct linux_sigframe *)tf->tf_esp - 1;
}
frame.sf_handler = catcher;
frame.sf_sig = bsd_to_linux_sig[sig];
/*
* Build the signal context to be used by sigreturn.
*/
frame.sf_sc.sc_mask = mask;
#ifdef VM86
if (tf->tf_eflags & PSL_VM) {
frame.sf_sc.sc_gs = tf->tf_vm86_gs;
frame.sf_sc.sc_fs = tf->tf_vm86_fs;
frame.sf_sc.sc_es = tf->tf_vm86_es;
frame.sf_sc.sc_ds = tf->tf_vm86_ds;
frame.sf_sc.sc_eflags = get_vflags(p);
} else
#endif
{
frame.sf_sc.sc_fs = tf->tf_fs;
frame.sf_sc.sc_gs = tf->tf_gs;
frame.sf_sc.sc_es = tf->tf_es;
frame.sf_sc.sc_ds = tf->tf_ds;
frame.sf_sc.sc_eflags = tf->tf_eflags;
}
frame.sf_sc.sc_edi = tf->tf_edi;
frame.sf_sc.sc_esi = tf->tf_esi;
frame.sf_sc.sc_ebp = tf->tf_ebp;
frame.sf_sc.sc_ebx = tf->tf_ebx;
frame.sf_sc.sc_edx = tf->tf_edx;
frame.sf_sc.sc_ecx = tf->tf_ecx;
frame.sf_sc.sc_eax = tf->tf_eax;
frame.sf_sc.sc_eip = tf->tf_eip;
frame.sf_sc.sc_cs = tf->tf_cs;
frame.sf_sc.sc_esp_at_signal = tf->tf_esp;
frame.sf_sc.sc_ss = tf->tf_ss;
frame.sf_sc.sc_err = tf->tf_err;
frame.sf_sc.sc_trapno = tf->tf_trapno;
if (copyout(&frame, fp, sizeof(frame)) != 0) {
/*
* Process has trashed its stack; give it an illegal
* instruction to halt it in its tracks.
*/
sigexit(p, SIGILL);
/* NOTREACHED */
}
/*
* Build context to run handler in.
*/
tf->tf_es = GSEL(GUDATA_SEL, SEL_UPL);
tf->tf_ds = GSEL(GUDATA_SEL, SEL_UPL);
tf->tf_eip = p->p_sigcode;
tf->tf_cs = GSEL(GUCODE_SEL, SEL_UPL);
tf->tf_eflags &= ~(PSL_T|PSL_VM|PSL_AC);
tf->tf_esp = (int)fp;
tf->tf_ss = GSEL(GUDATA_SEL, SEL_UPL);
}
/*
* System call to cleanup state after a signal
* has been taken. Reset signal mask and
* stack state from context left by sendsig (above).
* Return to previous pc and psl as specified by
* context left by sendsig. Check carefully to
* make sure that the user has not modified the
* psl to gain improper privileges or to cause
* a machine fault.
*/
int
linux_sys_sigreturn(struct proc *p, void *v, register_t *retval)
{
struct linux_sys_sigreturn_args /* {
syscallarg(struct linux_sigcontext *) scp;
} */ *uap = v;
struct linux_sigcontext *scp, context;
struct trapframe *tf;
tf = p->p_md.md_regs;
/*
* The trampoline code hands us the context.
* It is unsafe to keep track of it ourselves, in the event that a
* program jumps out of a signal handler.
*/
scp = SCARG(uap, scp);
if (copyin((caddr_t)scp, &context, sizeof(*scp)) != 0)
return (EFAULT);
/*
* Restore signal context.
*/
#ifdef VM86
if (context.sc_eflags & PSL_VM) {
tf->tf_vm86_gs = context.sc_gs;
tf->tf_vm86_fs = context.sc_fs;
tf->tf_vm86_es = context.sc_es;
tf->tf_vm86_ds = context.sc_ds;
set_vflags(p, context.sc_eflags);
} else
#endif
{
/*
* Check for security violations. If we're returning to
* protected mode, the CPU will validate the segment registers
* automatically and generate a trap on violations. We handle
* the trap, rather than doing all of the checking here.
*/
if (((context.sc_eflags ^ tf->tf_eflags) & PSL_USERSTATIC) != 0 ||
!USERMODE(context.sc_cs, context.sc_eflags))
return (EINVAL);
tf->tf_fs = context.sc_fs;
tf->tf_gs = context.sc_gs;
tf->tf_es = context.sc_es;
tf->tf_ds = context.sc_ds;
tf->tf_eflags = context.sc_eflags;
}
tf->tf_edi = context.sc_edi;
tf->tf_esi = context.sc_esi;
tf->tf_ebp = context.sc_ebp;
tf->tf_ebx = context.sc_ebx;
tf->tf_edx = context.sc_edx;
tf->tf_ecx = context.sc_ecx;
tf->tf_eax = context.sc_eax;
tf->tf_eip = context.sc_eip;
tf->tf_cs = context.sc_cs;
tf->tf_esp = context.sc_esp_at_signal;
tf->tf_ss = context.sc_ss;
p->p_sigacts->ps_sigstk.ss_flags &= ~SS_ONSTACK;
p->p_sigmask = context.sc_mask & ~sigcantmask;
return (EJUSTRETURN);
}
int
linux_sys_rt_sigreturn(struct proc *p, void *v, register_t *retval)
{
return(ENOSYS);
}
#ifdef USER_LDT
int
linux_read_ldt(struct proc *p, struct linux_sys_modify_ldt_args *uap,
register_t *retval)
{
struct i386_get_ldt_args gl;
int error;
caddr_t sg;
char *parms;
if (user_ldt_enable == 0)
return (ENOSYS);
sg = stackgap_init(p->p_emul);
gl.start = 0;
gl.desc = SCARG(uap, ptr);
gl.num = SCARG(uap, bytecount) / sizeof(union descriptor);
parms = stackgap_alloc(&sg, sizeof(gl));
if ((error = copyout(&gl, parms, sizeof(gl))) != 0)
return (error);
if ((error = i386_get_ldt(p, parms, retval)) != 0)
return (error);
*retval *= sizeof(union descriptor);
return (0);
}
struct linux_ldt_info {
u_int entry_number;
u_long base_addr;
u_int limit;
u_int seg_32bit:1;
u_int contents:2;
u_int read_exec_only:1;
u_int limit_in_pages:1;
u_int seg_not_present:1;
};
int
linux_write_ldt(struct proc *p, struct linux_sys_modify_ldt_args *uap,
register_t *retval)
{
struct linux_ldt_info ldt_info;
struct segment_descriptor sd;
struct i386_set_ldt_args sl;
int error;
caddr_t sg;
char *parms;
if (user_ldt_enable == 0)
return (ENOSYS);
if (SCARG(uap, bytecount) != sizeof(ldt_info))
return (EINVAL);
if ((error = copyin(SCARG(uap, ptr), &ldt_info, sizeof(ldt_info))) != 0)
return error;
if (ldt_info.contents == 3)
return (EINVAL);
sg = stackgap_init(p->p_emul);
sd.sd_lobase = ldt_info.base_addr & 0xffffff;
sd.sd_hibase = (ldt_info.base_addr >> 24) & 0xff;
sd.sd_lolimit = ldt_info.limit & 0xffff;
sd.sd_hilimit = (ldt_info.limit >> 16) & 0xf;
sd.sd_type =
16 | (ldt_info.contents << 2) | (!ldt_info.read_exec_only << 1);
sd.sd_dpl = SEL_UPL;
sd.sd_p = !ldt_info.seg_not_present;
sd.sd_def32 = ldt_info.seg_32bit;
sd.sd_gran = ldt_info.limit_in_pages;
sl.start = ldt_info.entry_number;
sl.desc = stackgap_alloc(&sg, sizeof(sd));
sl.num = 1;
#if 0
printf("linux_write_ldt: idx=%d, base=%x, limit=%x\n",
ldt_info.entry_number, ldt_info.base_addr, ldt_info.limit);
#endif
parms = stackgap_alloc(&sg, sizeof(sl));
if ((error = copyout(&sd, sl.desc, sizeof(sd))) != 0)
return (error);
if ((error = copyout(&sl, parms, sizeof(sl))) != 0)
return (error);
if ((error = i386_set_ldt(p, parms, retval)) != 0)
return (error);
*retval = 0;
return (0);
}
#endif /* USER_LDT */
int
linux_sys_modify_ldt(struct proc *p, void *v, register_t *retval)
{
struct linux_sys_modify_ldt_args /* {
syscallarg(int) func;
syscallarg(void *) ptr;
syscallarg(size_t) bytecount;
} */ *uap = v;
switch (SCARG(uap, func)) {
#ifdef USER_LDT
case 0:
return (linux_read_ldt(p, uap, retval));
case 1:
return (linux_write_ldt(p, uap, retval));
#endif /* USER_LDT */
default:
return (ENOSYS);
}
}
/*
* XXX Pathetic hack to make svgalib work. This will fake the major
* device number of an opened VT so that svgalib likes it. grmbl.
* Should probably do it 'wrong the right way' and use a mapping
* array for all major device numbers, and map linux_mknod too.
*/
dev_t
linux_fakedev(dev_t dev)
{
if (major(dev) == NATIVE_CONS_MAJOR)
return makedev(LINUX_CONS_MAJOR, (minor(dev) + 1));
return dev;
}
/*
* We come here in a last attempt to satisfy a Linux ioctl() call
*/
int
linux_machdepioctl(struct proc *p, void *v, register_t *retval)
{
struct linux_sys_ioctl_args /* {
syscallarg(int) fd;
syscallarg(u_long) com;
syscallarg(caddr_t) data;
} */ *uap = v;
struct sys_ioctl_args bia;
u_long com;
int error;
#if (NWSDISPLAY > 0 && defined(WSDISPLAY_COMPAT_USL))
struct vt_mode lvt;
caddr_t bvtp, sg;
#endif
struct filedesc *fdp;
struct file *fp;
int fd;
int (*ioctlf)(struct file *, u_long, caddr_t, struct proc *);
struct ioctl_pt pt;
fd = SCARG(uap, fd);
SCARG(&bia, fd) = SCARG(uap, fd);
SCARG(&bia, data) = SCARG(uap, data);
com = SCARG(uap, com);
fdp = p->p_fd;
if ((fp = fd_getfile(fdp, fd)) == NULL)
return (EBADF);
switch (com) {
#if (NWSDISPLAY > 0 && defined(WSDISPLAY_COMPAT_USL))
case LINUX_KDGKBMODE:
com = KDGKBMODE;
break;
case LINUX_KDSKBMODE:
com = KDSKBMODE;
if ((unsigned)SCARG(uap, data) == LINUX_K_MEDIUMRAW)
SCARG(&bia, data) = (caddr_t)K_RAW;
break;
case LINUX_KIOCSOUND:
SCARG(&bia, data) =
(caddr_t)(((unsigned long)SCARG(&bia, data)) & 0xffff);
/* FALLTHROUGH */
case LINUX_KDMKTONE:
com = KDMKTONE;
break;
case LINUX_KDSETMODE:
com = KDSETMODE;
break;
case LINUX_KDGETMODE:
#if NWSDISPLAY > 0 && defined(WSDISPLAY_COMPAT_USL)
com = WSDISPLAYIO_GMODE;
#else
com = KDGETMODE;
#endif
break;
case LINUX_KDENABIO:
com = KDENABIO;
break;
case LINUX_KDDISABIO:
com = KDDISABIO;
break;
case LINUX_KDGETLED:
com = KDGETLED;
break;
case LINUX_KDSETLED:
com = KDSETLED;
break;
case LINUX_VT_OPENQRY:
com = VT_OPENQRY;
break;
case LINUX_VT_GETMODE: {
int sig;
SCARG(&bia, com) = VT_GETMODE;
if ((error = sys_ioctl(p, &bia, retval)))
return error;
if ((error = copyin(SCARG(uap, data), (caddr_t)&lvt,
sizeof (struct vt_mode))))
return error;
/* We need to bounds check here in case there
is a race with another thread */
if ((error = bsd_to_linux_signal(lvt.relsig, &sig)))
return error;
lvt.relsig = sig;
if ((error = bsd_to_linux_signal(lvt.acqsig, &sig)))
return error;
lvt.acqsig = sig;
if ((error = bsd_to_linux_signal(lvt.frsig, &sig)))
return error;
lvt.frsig = sig;
return copyout((caddr_t)&lvt, SCARG(uap, data),
sizeof (struct vt_mode));
}
case LINUX_VT_SETMODE: {
int sig;
com = VT_SETMODE;
if ((error = copyin(SCARG(uap, data), (caddr_t)&lvt,
sizeof (struct vt_mode))))
return error;
if ((error = linux_to_bsd_signal(lvt.relsig, &sig)))
return error;
lvt.relsig = sig;
if ((error = linux_to_bsd_signal(lvt.acqsig, &sig)))
return error;
lvt.acqsig = sig;
if ((error = linux_to_bsd_signal(lvt.frsig, &sig)))
return error;
lvt.frsig = sig;
sg = stackgap_init(p->p_emul);
bvtp = stackgap_alloc(&sg, sizeof (struct vt_mode));
if ((error = copyout(&lvt, bvtp, sizeof (struct vt_mode))))
return error;
SCARG(&bia, data) = bvtp;
break;
}
case LINUX_VT_DISALLOCATE:
/* XXX should use WSDISPLAYIO_DELSCREEN */
return 0;
case LINUX_VT_RELDISP:
com = VT_RELDISP;
break;
case LINUX_VT_ACTIVATE:
com = VT_ACTIVATE;
break;
case LINUX_VT_WAITACTIVE:
com = VT_WAITACTIVE;
break;
case LINUX_VT_GETSTATE:
com = VT_GETSTATE;
break;
case LINUX_KDGKBTYPE:
{
char tmp = KB_101;
/* This is what Linux does */
return copyout(&tmp, SCARG(uap, data), sizeof(char));
}
#endif
default:
/*
* Unknown to us. If it's on a device, just pass it through
* using PTIOCLINUX, the device itself might be able to
* make some sense of it.
* XXX hack: if the function returns EJUSTRETURN,
* it has stuffed a sysctl return value in pt.data.
*/
FREF(fp);
ioctlf = fp->f_ops->fo_ioctl;
pt.com = SCARG(uap, com);
pt.data = SCARG(uap, data);
error = ioctlf(fp, PTIOCLINUX, (caddr_t)&pt, p);
FRELE(fp);
if (error == EJUSTRETURN) {
retval[0] = (register_t)pt.data;
error = 0;
}
if (error == ENOTTY)
printf("linux_machdepioctl: invalid ioctl %08lx\n",
com);
return (error);
}
SCARG(&bia, com) = com;
return sys_ioctl(p, &bia, retval);
}
/*
* Set I/O permissions for a process. Just set the maximum level
* right away (ignoring the argument), otherwise we would have
* to rely on I/O permission maps, which are not implemented.
*/
int
linux_sys_iopl(struct proc *p, void *v, register_t *retval)
{
#if 0
struct linux_sys_iopl_args /* {
syscallarg(int) level;
} */ *uap = v;
#endif
struct trapframe *fp = p->p_md.md_regs;
if (suser(p, 0) != 0)
return EPERM;
if (securelevel > 0)
return EPERM;
fp->tf_eflags |= PSL_IOPL;
*retval = 0;
return 0;
}
/*
* See above. If a root process tries to set access to an I/O port,
* just let it have the whole range.
*/
int
linux_sys_ioperm(struct proc *p, void *v, register_t *retval)
{
struct linux_sys_ioperm_args /* {
syscallarg(unsigned int) lo;
syscallarg(unsigned int) hi;
syscallarg(int) val;
} */ *uap = v;
struct trapframe *fp = p->p_md.md_regs;
if (suser(p, 0) != 0)
return EPERM;
if (securelevel > 0)
return EPERM;
if (SCARG(uap, val))
fp->tf_eflags |= PSL_IOPL;
*retval = 0;
return 0;
}