Return to trap.h CVS log | Up to [local] / sys / arch / hppa64 / include |
File: [local] / sys / arch / hppa64 / include / trap.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:55 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
/* $OpenBSD: trap.h,v 1.1 2005/04/01 10:40:48 mickey Exp $ */ /* * Copyright (c) 2005 Michael Shalayeff * All rights reserved. * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER IN * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _MACHINE_TRAP_H_ #define _MACHINE_TRAP_H_ /* * This is PA-RISC trap types per 1.1 specs, see .c files for references. */ #define T_NONEXIST 0 /* invalid interrupt vector */ #define T_HPMC 1 /* high priority machine check */ #define T_POWERFAIL 2 /* power failure */ #define T_RECOVERY 3 /* recovery counter */ #define T_INTERRUPT 4 /* external interrupt */ #define T_LPMC 5 /* low-priority machine check */ #define T_ITLBMISS 6 /* instruction TLB miss fault */ #define T_IPROT 7 /* instruction protection */ #define T_ILLEGAL 8 /* Illegal instruction */ #define T_IBREAK 9 /* break instruction */ #define T_PRIV_OP 10 /* privileged operation */ #define T_PRIV_REG 11 /* privileged register */ #define T_OVERFLOW 12 /* overflow */ #define T_CONDITION 13 /* conditional */ #define T_EXCEPTION 14 /* assist exception */ #define T_DTLBMISS 15 /* data TLB miss */ #define T_ITLBMISSNA 16 /* ITLB non-access miss */ #define T_DTLBMISSNA 17 /* DTLB non-access miss */ #define T_DPROT 18 /* data protection/rights/alignment <7100 */ #define T_DBREAK 19 /* data break */ #define T_TLB_DIRTY 20 /* TLB dirty bit */ #define T_PAGEREF 21 /* page reference */ #define T_EMULATION 22 /* assist emulation */ #define T_HIGHERPL 23 /* higher-privelege transfer */ #define T_LOWERPL 24 /* lower-privilege transfer */ #define T_TAKENBR 25 /* taken branch */ #define T_DATACC 26 /* data access rights >=7100 */ #define T_DATAPID 27 /* data protection ID >=7100 */ #define T_DATALIGN 28 /* unaligned data ref */ #define T_PERFMON 29 /* performance monitor interrupt */ #define T_IDEBUG 30 /* debug SFU interrupt */ #define T_DDEBUG 31 /* debug SFU interrupt */ /* * Reserved range for traps is 0-63, place user flag at 6th bit */ #define T_USER_POS 57 #define T_USER (1 << (63 - T_USER_POS)) /* * Various trap frame flags. */ #define TFF_LAST_POS 40 #define TFF_SYS_POS 41 #define TFF_INTR_POS 42 #define TFF_LAST (1 << (63 - TFF_LAST_POS)) #define TFF_SYS (1 << (63 - TFF_SYS_POS)) #define TFF_INTR (1 << (63 - TFF_INTR_POS)) /* * Define this for pretty printings of trapflags. */ #define T_BITS "\020\07user\036intr\037itlb\040last" /* * These are break instruction entry points. */ /* im5 */ #define HPPA_BREAK_KERNEL 0 /* im13 */ #define HPPA_BREAK_KGDB 5 #define HPPA_BREAK_GET_PSW 9 #define HPPA_BREAK_SET_PSW 10 #endif /* _MACHINE_TRAP_H_ */