[BACK]Return to clock.c CVS log [TXT][DIR] Up to [local] / sys / arch / hp300 / stand / uboot

Annotation of sys/arch/hp300/stand/uboot/clock.c, Revision 1.1

1.1     ! nbrk        1: /*     $OpenBSD: clock.c,v 1.5 2006/08/17 06:31:10 miod Exp $  */
        !             2: /*     $NetBSD: clock.c,v 1.3 1995/02/20 00:12:09 mycroft Exp $        */
        !             3:
        !             4: /*
        !             5:  * Copyright (c) 1988 University of Utah.
        !             6:  * Copyright (c) 1982, 1990, 1993
        !             7:  *     The Regents of the University of California.  All rights reserved.
        !             8:  *
        !             9:  * This code is derived from software contributed to Berkeley by
        !            10:  * the Systems Programming Group of the University of Utah Computer
        !            11:  * Science Department.
        !            12:  *
        !            13:  * Redistribution and use in source and binary forms, with or without
        !            14:  * modification, are permitted provided that the following conditions
        !            15:  * are met:
        !            16:  * 1. Redistributions of source code must retain the above copyright
        !            17:  *    notice, this list of conditions and the following disclaimer.
        !            18:  * 2. Redistributions in binary form must reproduce the above copyright
        !            19:  *    notice, this list of conditions and the following disclaimer in the
        !            20:  *    documentation and/or other materials provided with the distribution.
        !            21:  * 3. Neither the name of the University nor the names of its contributors
        !            22:  *    may be used to endorse or promote products derived from this software
        !            23:  *    without specific prior written permission.
        !            24:  *
        !            25:  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
        !            26:  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
        !            27:  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
        !            28:  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
        !            29:  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
        !            30:  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
        !            31:  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
        !            32:  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
        !            33:  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
        !            34:  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
        !            35:  * SUCH DAMAGE.
        !            36:  *
        !            37:  * from: Utah $Hdr: clock.c 1.18 91/01/21$
        !            38:  *
        !            39:  *     @(#)clock.c     8.2 (Berkeley) 1/12/94
        !            40:  */
        !            41:
        !            42: #include <sys/param.h>
        !            43:
        !            44: #include <lib/libsa/stand.h>
        !            45:
        !            46: #include "samachdep.h"
        !            47: #include "hilreg.h"
        !            48: #include <hp300/hp300/clockreg.h>
        !            49:
        !            50: extern void send_hil_cmd(struct hil_dev *, u_char, u_char *, u_char, u_char *);
        !            51:
        !            52: static int month_days[12] = {
        !            53:        31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
        !            54: };
        !            55:
        !            56: u_char bbc_registers[13];
        !            57: struct hil_dev *bbcaddr = (struct hil_dev *)BBCADDR;
        !            58:
        !            59: int    bbc_to_gmt(u_long *);
        !            60: void   read_bbc(void);
        !            61: u_char read_bbc_reg(int);
        !            62:
        !            63: time_t
        !            64: getsecs()
        !            65: {
        !            66:        static int bbcinited = 0;
        !            67:        u_long timbuf = 0;
        !            68:
        !            69:        if (!bbc_to_gmt(&timbuf) && !bbcinited)
        !            70:                printf("WARNING: bad date in battery clock\n");
        !            71:        bbcinited = 1;
        !            72:
        !            73:        /* Battery clock does not store usec's, so forget about it. */
        !            74:        return((time_t)timbuf);
        !            75: }
        !            76:
        !            77: int
        !            78: bbc_to_gmt(u_long *timbuf)
        !            79: {
        !            80:        int i;
        !            81:        u_long tmp;
        !            82:        int year, month, day, hour, min, sec;
        !            83:
        !            84:        read_bbc();
        !            85:
        !            86:        sec = bbc_to_decimal(1, 0);
        !            87:        min = bbc_to_decimal(3, 2);
        !            88:
        !            89:        /*
        !            90:         * Hours are different for some reason. Makes no sense really.
        !            91:         */
        !            92:        hour  = ((bbc_registers[5] & 0x03) * 10) + bbc_registers[4];
        !            93:        day   = bbc_to_decimal(8, 7);
        !            94:        month = bbc_to_decimal(10, 9);
        !            95:        year  = bbc_to_decimal(12, 11) + 1900;
        !            96:
        !            97:        range_test(hour, 0, 23);
        !            98:        range_test(day, 1, 31);
        !            99:        range_test(month, 1, 12);
        !           100:        range_test(year, STARTOFTIME, 2038);    /* 2038 is the end of time. */
        !           101:
        !           102:        tmp = 0;
        !           103:
        !           104:        for (i = STARTOFTIME; i < year; i++)
        !           105:                tmp += days_in_year(i);
        !           106:        if (leapyear(year) && month > FEBRUARY)
        !           107:                tmp++;
        !           108:
        !           109:        for (i = 1; i < month; i++)
        !           110:                tmp += days_in_month(i);
        !           111:
        !           112:        tmp += (day - 1);
        !           113:        tmp = ((tmp * 24 + hour) * 60 + min) * 60 + sec;
        !           114:
        !           115:        *timbuf = tmp;
        !           116:        return(1);
        !           117: }
        !           118:
        !           119: void
        !           120: read_bbc()
        !           121: {
        !           122:        int i, read_okay;
        !           123:
        !           124:        read_okay = 0;
        !           125:        while (!read_okay) {
        !           126:                read_okay = 1;
        !           127:                for (i = 0; i <= NUM_BBC_REGS; i++)
        !           128:                        bbc_registers[i] = read_bbc_reg(i);
        !           129:                for (i = 0; i <= NUM_BBC_REGS; i++)
        !           130:                        if (bbc_registers[i] != read_bbc_reg(i))
        !           131:                                read_okay = 0;
        !           132:        }
        !           133: }
        !           134:
        !           135: u_char
        !           136: read_bbc_reg(int reg)
        !           137: {
        !           138:        u_char data = reg;
        !           139:
        !           140:        if (bbcaddr) {
        !           141: #if 0
        !           142:                send_hil_cmd(bbcaddr, BBC_SET_REG, &data, 1, NULL);
        !           143:                send_hil_cmd(bbcaddr, BBC_READ_REG, NULL, 0, &data);
        !           144: #else
        !           145:                HILWAIT(bbcaddr);
        !           146:                bbcaddr->hil_cmd = BBC_SET_REG;
        !           147:                HILWAIT(bbcaddr);
        !           148:                bbcaddr->hil_data = data;
        !           149:                HILWAIT(bbcaddr);
        !           150:                bbcaddr->hil_cmd = BBC_READ_REG;
        !           151:                HILDATAWAIT(bbcaddr);
        !           152:                data = bbcaddr->hil_data;
        !           153: #endif
        !           154:        }
        !           155:        return(data);
        !           156: }

CVSweb