File: [local] / sys / arch / hp300 / stand / include / grfreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:28 2008 UTC (16 years, 3 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: grfreg.h,v 1.2 2006/08/17 06:31:10 miod Exp $ */
/* $NetBSD: grfreg.h,v 1.2 1994/10/26 07:24:09 cgd Exp $ */
/*
* Copyright (c) 1991 University of Utah.
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: grfreg.h 1.6 92/01/31$
*
* @(#)grfreg.h 8.1 (Berkeley) 6/10/93
*/
/* 300 bitmapped display hardware primary id */
#define GRFHWID 0x39
/* 300 internal bitmapped display address */
#define GRFIADDR 0x560000
/* 300 hardware secondary ids */
#define GID_GATORBOX 1
#define GID_TOPCAT 2
#define GID_RENAISSANCE 4
#define GID_LRCATSEYE 5
#define GID_HRCCATSEYE 6
#define GID_HRMCATSEYE 7
#define GID_DAVINCI 8
#define GID_XXXCATSEYE 9
#define GID_XGENESIS 11
#define GID_TIGER 12
#define GID_YGENESIS 13
#define GID_HYPERION 14
#define GID_STI 42/* any value which is not a dio frame buffer, really */
typedef unsigned char grftype;
struct grfreg {
grftype gr_pad0,
gr_id, /* +0x01 */
gr_pad1[0x3],
gr_fbwidth_h, /* +0x05 */
gr_pad2,
gr_fbwidth_l, /* +0x07 */
gr_pad3,
gr_fbheight_h, /* +0x09 */
gr_pad4,
gr_fbheight_l, /* +0x0B */
gr_pad5,
gr_dwidth_h, /* +0x0D */
gr_pad6,
gr_dwidth_l, /* +0x0F */
gr_pad7,
gr_dheight_h, /* +0x11 */
gr_pad8,
gr_dheight_l, /* +0x13 */
gr_pad9,
gr_id2, /* +0x15 */
gr_pad10[0x47],
gr_fbomsb, /* +0x5d */
gr_pad11,
gr_fbolsb; /* +0x5f */
};