[BACK]Return to Makefile.inc CVS log [TXT][DIR] Up to [local] / sys / arch / hp300 / stand

File: [local] / sys / arch / hp300 / stand / Makefile.inc (download)

Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:27 2008 UTC (16 years, 3 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD
Changes since 1.1: +0 -0 lines

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

#	$OpenBSD: Makefile.inc,v 1.8 2006/08/17 06:31:08 miod Exp $
#	$NetBSD: Makefile.inc,v 1.7 1997/05/12 07:43:18 thorpej Exp $

BINDIR=			/usr/mdec

# RELOC=FFF00000 allows for boot prog up to FF000 (1044480) bytes long
RELOC=	FFF00000

CFLAGS+=		-Wall -Wstrict-prototypes -Wmissing-prototypes \
			-fno-stack-protector -msoft-float

CPPFLAGS+=		-DAPCICONSOLE -DDCACONSOLE -DDCMCONSOLE -DITECONSOLE
CPPFLAGS+=		-DHIL_KEYBOARD -DUK_KEYBOARD
CPPFLAGS+=		-DDOMAIN_KEYBOARD
CPPFLAGS+=		-DSTANDALONE -Dhp300
CPPFLAGS+=		-DCOMPAT_UFS -DNO_LSEEK

# Limit the alloc() heap to below the msgbuf and ROM scratch pages.
CPPFLAGS+=		-DHEAP_LIMIT="0xffffdfff"

### Figure out what to use for libcommon
COMMONDIR=		${.CURDIR}/../common

.if exists(${COMMONDIR}/obj.${MACHINE})
COMMONOBJDIR=		${COMMONDIR}/obj.${MACHINE}
.elif exists(${COMMONDIR}/obj)
COMMONOBJDIR=		${COMMONDIR}/obj
.else
COMMONOBJDIR=		${COMMONDIR}
.endif

LIBCOMMON=		${COMMONOBJDIR}/libcommon.a

### Figure out what to use for libkern
LIBKERNDIR=		${.CURDIR}/../libkern

.if exists(${LIBKERNDIR}/obj.${MACHINE})
LIBKERNOBJDIR=		${LIBKERNDIR}/obj.${MACHINE}
.elif exists(${LIBKERNDIR}/obj)
LIBKERNOBJDIR=		${LIBKERNDIR}/obj
.else
LIBKERNOBJDIR=		${LIBKERNDIR}
.endif

LIBKERN=		${LIBKERNOBJDIR}/libkern.a

### Figure out what to use for libsa
LIBSADIR=		${.CURDIR}/../libsa

.if exists(${LIBSADIR}/obj.${MACHINE})
LIBSAOBJDIR=		${LIBSADIR}/obj.${MACHINE}
.elif exists(${LIBSADIR}/obj)
LIBSAOBJDIR=		${LIBSADIR}/obj
.else
LIBSAOBJDIR=		${LIBSADIR}
.endif

LIBSA=			${LIBSAOBJDIR}/libsa.a

### Figure out what to use for libsaz
LIBSAZDIR=		${.CURDIR}/../libsaz

.if exists(${LIBSAZDIR}/obj.${MACHINE})
LIBSAZOBJDIR=		${LIBSAZDIR}/obj.${MACHINE}
.elif exists(${LIBSAZDIR}/obj)
LIBSAZOBJDIR=		${LIBSAZDIR}/obj
.else
LIBSAZOBJDIR=		${LIBSAZDIR}
.endif

LIBSAZ=			${LIBSAZOBJDIR}/libsaz.a

### Figure out what to use for libz
LIBZDIR=		${.CURDIR}/../libz

.if exists(${LIBZDIR}/obj.${MACHINE})
LIBZOBJDIR=		${LIBZDIR}/obj.${MACHINE}
.elif exists(${LIBZDIR}/obj)
LIBZOBJDIR=		${LIBZDIR}/obj
.else
LIBZOBJDIR=		${LIBZDIR}
.endif

LIBZ=			${LIBZOBJDIR}/libz.a

### Figure out what to use for mkboot
MKBOOTDIR=		${.CURDIR}/../mkboot

.if exists(${MKBOOTDIR}/obj.${MACHINE})
MKBOOTOBJDIR=		${MKBOOTDIR}/obj.${MACHINE}
.elif exists(${MKBOOTDIR}/obj)
MKBOOTOBJDIR=		${MKBOOTDIR}/obj
.else
MKBOOTOBJDIR=		${MKBOOTDIR}
.endif

MKBOOT_PROG=		${MKBOOTOBJDIR}/mkboot

### Figure out what to use for stripboot
STRIPBOOTDIR=		${.CURDIR}/../stripboot

.if exists(${STRIPBOOTDIR}/obj.${MACHINE})
STRIPBOOTOBJDIR=	${STRIPBOOTDIR}/obj.${MACHINE}
.elif exists(${STRIPBOOTDIR}/obj)
STRIPBOOTOBJDIR=	${STRIPBOOTDIR}/obj
.else
STRIPBOOTOBJDIR=	${STRIPBOOTDIR}
.endif

STRIPBOOT_PROG=		${STRIPBOOTOBJDIR}/stripboot

# Make sure ${MKBOOT_PROG} is always available
${MKBOOT_PROG}:
	@cd ${MKBOOTDIR} && make depend && make

# Make sure ${STRIPBOOT_PROG} is always available
${STRIPBOOT_PROG}:
	@cd ${STRIPBOOTDIR} && make depend && make