Return to Makefile.inc CVS log | Up to [local] / sys / arch / hp300 / stand |
File: [local] / sys / arch / hp300 / stand / Makefile.inc (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:27 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
# $OpenBSD: Makefile.inc,v 1.8 2006/08/17 06:31:08 miod Exp $ # $NetBSD: Makefile.inc,v 1.7 1997/05/12 07:43:18 thorpej Exp $ BINDIR= /usr/mdec # RELOC=FFF00000 allows for boot prog up to FF000 (1044480) bytes long RELOC= FFF00000 CFLAGS+= -Wall -Wstrict-prototypes -Wmissing-prototypes \ -fno-stack-protector -msoft-float CPPFLAGS+= -DAPCICONSOLE -DDCACONSOLE -DDCMCONSOLE -DITECONSOLE CPPFLAGS+= -DHIL_KEYBOARD -DUK_KEYBOARD CPPFLAGS+= -DDOMAIN_KEYBOARD CPPFLAGS+= -DSTANDALONE -Dhp300 CPPFLAGS+= -DCOMPAT_UFS -DNO_LSEEK # Limit the alloc() heap to below the msgbuf and ROM scratch pages. CPPFLAGS+= -DHEAP_LIMIT="0xffffdfff" ### Figure out what to use for libcommon COMMONDIR= ${.CURDIR}/../common .if exists(${COMMONDIR}/obj.${MACHINE}) COMMONOBJDIR= ${COMMONDIR}/obj.${MACHINE} .elif exists(${COMMONDIR}/obj) COMMONOBJDIR= ${COMMONDIR}/obj .else COMMONOBJDIR= ${COMMONDIR} .endif LIBCOMMON= ${COMMONOBJDIR}/libcommon.a ### Figure out what to use for libkern LIBKERNDIR= ${.CURDIR}/../libkern .if exists(${LIBKERNDIR}/obj.${MACHINE}) LIBKERNOBJDIR= ${LIBKERNDIR}/obj.${MACHINE} .elif exists(${LIBKERNDIR}/obj) LIBKERNOBJDIR= ${LIBKERNDIR}/obj .else LIBKERNOBJDIR= ${LIBKERNDIR} .endif LIBKERN= ${LIBKERNOBJDIR}/libkern.a ### Figure out what to use for libsa LIBSADIR= ${.CURDIR}/../libsa .if exists(${LIBSADIR}/obj.${MACHINE}) LIBSAOBJDIR= ${LIBSADIR}/obj.${MACHINE} .elif exists(${LIBSADIR}/obj) LIBSAOBJDIR= ${LIBSADIR}/obj .else LIBSAOBJDIR= ${LIBSADIR} .endif LIBSA= ${LIBSAOBJDIR}/libsa.a ### Figure out what to use for libsaz LIBSAZDIR= ${.CURDIR}/../libsaz .if exists(${LIBSAZDIR}/obj.${MACHINE}) LIBSAZOBJDIR= ${LIBSAZDIR}/obj.${MACHINE} .elif exists(${LIBSAZDIR}/obj) LIBSAZOBJDIR= ${LIBSAZDIR}/obj .else LIBSAZOBJDIR= ${LIBSAZDIR} .endif LIBSAZ= ${LIBSAZOBJDIR}/libsaz.a ### Figure out what to use for libz LIBZDIR= ${.CURDIR}/../libz .if exists(${LIBZDIR}/obj.${MACHINE}) LIBZOBJDIR= ${LIBZDIR}/obj.${MACHINE} .elif exists(${LIBZDIR}/obj) LIBZOBJDIR= ${LIBZDIR}/obj .else LIBZOBJDIR= ${LIBZDIR} .endif LIBZ= ${LIBZOBJDIR}/libz.a ### Figure out what to use for mkboot MKBOOTDIR= ${.CURDIR}/../mkboot .if exists(${MKBOOTDIR}/obj.${MACHINE}) MKBOOTOBJDIR= ${MKBOOTDIR}/obj.${MACHINE} .elif exists(${MKBOOTDIR}/obj) MKBOOTOBJDIR= ${MKBOOTDIR}/obj .else MKBOOTOBJDIR= ${MKBOOTDIR} .endif MKBOOT_PROG= ${MKBOOTOBJDIR}/mkboot ### Figure out what to use for stripboot STRIPBOOTDIR= ${.CURDIR}/../stripboot .if exists(${STRIPBOOTDIR}/obj.${MACHINE}) STRIPBOOTOBJDIR= ${STRIPBOOTDIR}/obj.${MACHINE} .elif exists(${STRIPBOOTDIR}/obj) STRIPBOOTOBJDIR= ${STRIPBOOTDIR}/obj .else STRIPBOOTOBJDIR= ${STRIPBOOTDIR} .endif STRIPBOOT_PROG= ${STRIPBOOTOBJDIR}/stripboot # Make sure ${MKBOOT_PROG} is always available ${MKBOOT_PROG}: @cd ${MKBOOTDIR} && make depend && make # Make sure ${STRIPBOOT_PROG} is always available ${STRIPBOOT_PROG}: @cd ${STRIPBOOTDIR} && make depend && make