Return to disksubr.c CVS log

Up to [local] / sys / arch / hp300 / hp300

Import of OpenBSD 4.2 release kernel tree with initial code to support 
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO

Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)

/*	$OpenBSD: disksubr.c,v 1.41 2007/06/20 18:15:45 deraadt Exp $	*/
/*	$NetBSD: disksubr.c,v 1.9 1997/04/01 03:12:13 scottr Exp $	*/

/*
 * Copyright (c) 1982, 1986, 1988, 1993
 *	The Regents of the University of California.  All rights reserved.
 * (c) UNIX System Laboratories, Inc.
 * All or some portions of this file are derived from material licensed
 * to the University of California by American Telephone and Telegraph
 * Co. or Unix System Laboratories, Inc. and are reproduced herein with
 * the permission of UNIX System Laboratories, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/disk.h>
#include <sys/disklabel.h>
#include <sys/syslog.h>

/*
 * Attempt to read a disk label from a device using the indicated strategy
 * routine.  The label must be partly set up before this: secpercyl and
 * anything required in the strategy routine (e.g., sector size) must be
 * filled in before calling us.  Returns null on success and an error
 * string on failure.
 */
char *
readdisklabel(dev_t dev, void (*strat)(struct buf *),
    struct disklabel *lp, int spoofonly)
{
	struct buf *bp = NULL;
	char *msg;

	if ((msg = initdisklabel(lp)))
		goto done;

	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;

	/* don't read the on-disk label if we are in spoofed-only mode */
	if (spoofonly)
		goto done;

	bp->b_blkno = LABELSECTOR;
	bp->b_bcount = lp->d_secsize;
	bp->b_flags = B_BUSY | B_READ;
	(*strat)(bp);
	if (biowait(bp)) {
		msg = "disk label I/O error";
		goto done;
	}

	msg = checkdisklabel(bp->b_data + LABELOFFSET, lp);
	if (msg == NULL)
		goto done;

#if defined(CD9660)
	if (iso_disklabelspoof(dev, strat, lp) == 0) {
		msg = NULL;
		goto done;
	}
#endif
#if defined(UDF)
	if (udf_disklabelspoof(dev, strat, lp) == 0) {
		msg = NULL;
		goto done;
	}
#endif

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	return (msg);
}

/*
 * Write disk label back to device after modification.
 */
int
writedisklabel(dev_t dev, void (*strat)(struct buf *), struct disklabel *lp)
{
	struct buf *bp = NULL;
	struct disklabel *dlp;
	int error = 0;

	/* get a buffer and initialize it */
	bp = geteblk((int)lp->d_secsize);
	bp->b_dev = dev;
	bp->b_blkno = LABELSECTOR;
	bp->b_bcount = lp->d_secsize;
	bp->b_flags = B_BUSY | B_READ;
	(*strat)(bp);
	if ((error = biowait(bp)) != 0)
		goto done;

	/* Write it in the regular place. */
	dlp = (struct disklabel *)(bp->b_data + LABELOFFSET);
	*dlp = *lp;
	bp->b_flags = B_BUSY | B_WRITE;
	(*strat)(bp);
	error = biowait(bp);

done:
	if (bp) {
		bp->b_flags |= B_INVAL;
		brelse(bp);
	}
	return (error);
}