File: [local] / sys / arch / hp300 / dev / rboxreg.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:42 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: rboxreg.h,v 1.2 2005/01/24 21:36:39 miod Exp $ */
/* $NetBSD: grf_rbreg.h,v 1.4 1994/10/26 07:24:03 cgd Exp $ */
/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: Utah $Hdr: grf_rbreg.h 1.9 92/01/21$
*
* @(#)grf_rbreg.h 8.1 (Berkeley) 6/10/93
*/
/*
* Map of the Renaissance frame buffer controller chip in memory ...
*/
#define rb_waitbusy(regaddr) \
do { \
while (((volatile struct rboxfb *)(regaddr))->wbusy & 0x01) \
DELAY(10); \
} while (0)
#define RBOX_DUALROP(rop) ((rop) << 4 | (rop))
#define CM1RED(fb) ((volatile struct rencm *)((fb)->regkva + 0x6400))
#define CM1GRN(fb) ((volatile struct rencm *)((fb)->regkva + 0x6800))
#define CM1BLU(fb) ((volatile struct rencm *)((fb)->regkva + 0x6C00))
#define CM2RED(fb) ((volatile struct rencm *)((fb)->regkva + 0x7400))
#define CM2GRN(fb) ((volatile struct rencm *)((fb)->regkva + 0x7800))
#define CM2BLU(fb) ((volatile struct rencm *)((fb)->regkva + 0x7C00))
struct rencm {
u_int8_t :8, :8, :8;
u_int8_t value;
};
struct rboxfb {
struct diofbreg regs;
u_int8_t filler2[16359];
u_int8_t wbusy; /* window mover is active 0x4047 */
u_int8_t filler3[0x405b - 0x4048];
u_int8_t scanbusy; /* scan converteris active 0x405B */
u_int8_t filler3b[0x4083 - 0x405c];
u_int8_t video_enable; /* drive vid. refresh bus 0x4083 */
u_int8_t filler4[3];
u_int8_t display_enable; /* enable the display 0x4087 */
u_int8_t filler5[8];
u_int32_t write_enable; /* write enable register 0x4090 */
u_int8_t filler6[11];
u_int8_t wmove; /* start window mover 0x409f */
u_int8_t filler7[3];
u_int8_t blink; /* blink register 0x40a3 */
u_int8_t filler8[15];
u_int8_t fold; /* fold register 0x40b3 */
u_int32_t opwen; /* overlay plane write enable 0x40b4 */
u_int8_t filler9[3];
u_int8_t tmode; /* Tile mode size 0x40bb */
u_int8_t filler9a[3];
u_int8_t drive; /* drive register 0x40bf */
u_int8_t filler10[3];
u_int8_t vdrive; /* vdrive register 0x40c3 */
u_int8_t filler10a[0x40cb-0x40c4];
u_int8_t zconfig; /* Z-buffer mode 0x40cb */
u_int8_t filler11a[2];
u_int16_t tpatt; /* Transparency pattern 0x40ce */
u_int8_t filler11b[3];
u_int8_t dmode; /* dither mode 0x40d3 */
u_int8_t filler11c[3];
u_int8_t en_scan; /* enable scan board to DTACK 0x40d7 */
u_int8_t filler11d[0x40ef-0x40d8];
u_int8_t rep_rule; /* replacement rule 0x40ef */
u_int8_t filler12[2];
u_int16_t source_x; /* source x 0x40f2 */
u_int8_t filler13[2];
u_int16_t source_y; /* source y 0x40f6 */
u_int8_t filler14[2];
u_int16_t dest_x; /* dest x 0x40fa */
u_int8_t filler15[2];
u_int16_t dest_y; /* dest y 0x40fe */
u_int8_t filler16[2];
u_int16_t wwidth; /* window width 0x4102 */
u_int8_t filler17[2];
u_int16_t wheight; /* window height 0x4106 */
u_int8_t filler18[18];
u_int16_t patt_x; /* pattern x 0x411a */
u_int8_t filler19[2];
u_int16_t patt_y; /* pattern y 0x411e */
u_int8_t filler20[0x8012 - 0x4120];
u_int16_t te_status; /* transform engine status 0x8012 */
u_int8_t filler21[0x1ffff-0x8014];
};