File: [local] / sys / arch / hp300 / dev / dma.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:39 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: dma.c,v 1.17 2005/11/17 23:56:02 miod Exp $ */
/* $NetBSD: dma.c,v 1.19 1997/05/05 21:02:39 thorpej Exp $ */
/*
* Copyright (c) 1995, 1996, 1997
* Jason R. Thorpe. All rights reserved.
* Copyright (c) 1982, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)dma.c 8.1 (Berkeley) 6/10/93
*/
/*
* DMA driver
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/device.h>
#include <sys/timeout.h>
#include <machine/frame.h>
#include <machine/cpu.h>
#include <machine/intr.h>
#include <hp300/dev/dmareg.h>
#include <hp300/dev/dmavar.h>
#include <uvm/uvm_extern.h>
/*
* The largest single request will be MAXPHYS bytes which will require
* at most MAXPHYS/NBPG+1 chain elements to describe, i.e. if none of
* the buffer pages are physically contiguous (MAXPHYS/NBPG) and the
* buffer is not page aligned (+1).
*/
#define DMAMAXIO (MAXPHYS/NBPG+1)
struct dma_chain {
u_int dc_count;
paddr_t dc_addr;
};
struct dma_channel {
struct dmaqueue *dm_job; /* current job */
struct dmadevice *dm_hwaddr; /* registers if DMA_C */
struct dmaBdevice *dm_Bhwaddr; /* registers if not DMA_C */
char dm_flags; /* misc. flags */
u_short dm_cmd; /* DMA controller command */
u_int dm_cur; /* current segment */
u_int dm_last; /* last segment */
struct dma_chain dm_chain[DMAMAXIO]; /* all segments */
};
struct dma_softc {
struct dmareg *sc_dmareg; /* pointer to our hardware */
struct isr sc_isr;
struct dma_channel sc_chan[NDMACHAN]; /* 2 channels */
#ifdef DEBUG
struct timeout sc_timeout; /* DMA timeout */
#endif
TAILQ_HEAD(, dmaqueue) sc_queue; /* job queue */
char sc_type; /* A, B, or C */
} dma_softc;
/* types */
#define DMA_B 0
#define DMA_C 1
/* flags */
#define DMAF_PCFLUSH 0x01
#define DMAF_VCFLUSH 0x02
#define DMAF_NOINTR 0x04
void dmacflush(struct dma_channel *);
int dmaintr(void *);
#ifdef DEBUG
int dmadebug = 0;
#define DDB_WORD 0x01 /* same as DMAGO_WORD */
#define DDB_LWORD 0x02 /* same as DMAGO_LWORD */
#define DDB_FOLLOW 0x04
#define DDB_IO 0x08
void dmatimeout(void *);
int dmatimo[NDMACHAN];
long dmahits[NDMACHAN];
long dmamisses[NDMACHAN];
long dmabyte[NDMACHAN];
long dmaword[NDMACHAN];
long dmalword[NDMACHAN];
#endif
/*
* Initialize the DMA engine, called by dioattach()
*/
void
dmainit()
{
struct dma_softc *sc = &dma_softc;
struct dmareg *dma;
struct dma_channel *dc;
int i;
char rev;
/* There's just one. */
sc->sc_dmareg = (struct dmareg *)DMA_BASE;
dma = sc->sc_dmareg;
/*
* Determine the DMA type. A DMA_A or DMA_B will fail the
* following probe.
*
* XXX Don't know how to easily differentiate the A and B cards,
* so we just hope nobody has an A card (A cards will work if
* splbio works out to ipl 3).
*/
if (badbaddr((char *)&dma->dma_id[2])) {
rev = 'B';
#if !defined(HP320)
panic("dmainit: DMA card requires hp320 support");
#endif
} else
rev = dma->dma_id[2];
sc->sc_type = (rev == 'B') ? DMA_B : DMA_C;
TAILQ_INIT(&sc->sc_queue);
for (i = 0; i < NDMACHAN; i++) {
dc = &sc->sc_chan[i];
dc->dm_job = NULL;
switch (i) {
case 0:
dc->dm_hwaddr = &dma->dma_chan0;
dc->dm_Bhwaddr = &dma->dma_Bchan0;
break;
case 1:
dc->dm_hwaddr = &dma->dma_chan1;
dc->dm_Bhwaddr = &dma->dma_Bchan1;
break;
default:
panic("dmainit: more than 2 channels?");
/* NOTREACHED */
}
}
#ifdef DEBUG
/* make sure timeout is really not needed */
timeout_set(&sc->sc_timeout, dmatimeout, sc);
timeout_add(&sc->sc_timeout, 30 * hz);
#endif
printf("98620%c, 2 channels, %d bit DMA\n",
rev, (rev == 'B') ? 16 : 32);
/*
* Defer hooking up our interrupt until the first
* DMA-using controller has hooked up theirs.
*/
sc->sc_isr.isr_func = NULL;
sc->sc_isr.isr_arg = sc;
sc->sc_isr.isr_priority = IPL_BIO;
}
/*
* Compute the ipl and (re)establish the interrupt handler
* for the DMA controller.
*/
void
dmacomputeipl()
{
struct dma_softc *sc = &dma_softc;
if (sc->sc_isr.isr_func != NULL)
intr_disestablish(&sc->sc_isr);
/*
* Our interrupt level must be as high as the highest
* device using DMA (i.e. splbio).
*/
sc->sc_isr.isr_ipl = PSLTOIPL(hp300_bioipl);
sc->sc_isr.isr_func = dmaintr;
intr_establish(&sc->sc_isr, "dma");
}
int
dmareq(struct dmaqueue *dq)
{
struct dma_softc *sc = &dma_softc;
int i, chan, s;
#if 1
s = splhigh(); /* XXXthorpej */
#else
s = splbio();
#endif
chan = dq->dq_chan;
for (i = NDMACHAN - 1; i >= 0; i--) {
/*
* Can we use this channel?
*/
if ((chan & (1 << i)) == 0)
continue;
/*
* We can use it; is it busy?
*/
if (sc->sc_chan[i].dm_job != NULL)
continue;
/*
* Not busy; give the caller this channel.
*/
sc->sc_chan[i].dm_job = dq;
dq->dq_chan = i;
splx(s);
return (1);
}
/*
* Couldn't get a channel now; put this in the queue.
*/
TAILQ_INSERT_TAIL(&sc->sc_queue, dq, dq_list);
splx(s);
return (0);
}
void
dmacflush(struct dma_channel *dc)
{
#if defined(CACHE_HAVE_PAC) || defined(M68040)
if (dc->dm_flags & DMAF_PCFLUSH) {
PCIA();
dc->dm_flags &= ~DMAF_PCFLUSH;
}
#endif
#if defined(CACHE_HAVE_VAC)
if (dc->dm_flags & DMAF_VCFLUSH) {
/*
* 320/350s have VACs that may also need flushing.
* In our case we only flush the supervisor side
* because we know that if we are DMAing to user
* space, the physical pages will also be mapped
* in kernel space (via vmapbuf) and hence cache-
* inhibited by the pmap module due to the multiple
* mapping.
*/
DCIS();
dc->dm_flags &= ~DMAF_VCFLUSH;
}
#endif
}
void
dmafree(struct dmaqueue *dq)
{
int unit = dq->dq_chan;
struct dma_softc *sc = &dma_softc;
struct dma_channel *dc = &sc->sc_chan[unit];
struct dmaqueue *dn;
int chan, s;
#if 1
s = splhigh(); /* XXXthorpej */
#else
s = splbio();
#endif
#ifdef DEBUG
dmatimo[unit] = 0;
#endif
DMA_CLEAR(dc);
/*
* XXX we may not always go through the flush code in dmastop()
*/
dmacflush(dc);
/*
* Channel is now free. Look for another job to run on this
* channel.
*/
dc->dm_job = NULL;
chan = 1 << unit;
TAILQ_FOREACH(dn, &sc->sc_queue, dq_list) {
if (dn->dq_chan & chan) {
/* Found one... */
TAILQ_REMOVE(&sc->sc_queue, dn, dq_list);
dc->dm_job = dn;
dn->dq_chan = dq->dq_chan;
splx(s);
/* Start the initiator. */
(*dn->dq_start)(dn->dq_softc);
return;
}
}
splx(s);
}
void
dmago(int unit, char *addr, u_int count, int flags)
{
struct dma_softc *sc = &dma_softc;
struct dma_channel *dc = &sc->sc_chan[unit];
paddr_t dmaend = 0;
u_int seg, tcount;
#ifdef DIAGNOSTIC
if (count > MAXPHYS)
panic("dmago: count > MAXPHYS");
#endif
#if defined(HP320)
if (sc->sc_type == DMA_B && (flags & DMAGO_LWORD))
panic("dmago: no can do 32-bit DMA");
#endif
#ifdef DEBUG
if (dmadebug & DDB_FOLLOW)
printf("dmago(%d, %p, %x, %x)\n",
unit, addr, count, flags);
if (flags & DMAGO_LWORD)
dmalword[unit]++;
else if (flags & DMAGO_WORD)
dmaword[unit]++;
else
dmabyte[unit]++;
#endif
/*
* Build the DMA chain
*/
for (seg = 0; count > 0; seg++) {
if (pmap_extract(pmap_kernel(), (vaddr_t)addr,
&dc->dm_chain[seg].dc_addr) == FALSE)
panic("dmago: pmap_extract(%x) failed", addr);
#if defined(M68040)
/*
* Push back dirty cache lines
*/
if (mmutype == MMU_68040)
DCFP(dc->dm_chain[seg].dc_addr);
#endif
if (count < (tcount = PAGE_SIZE - ((int)addr & PAGE_MASK)))
tcount = count;
dc->dm_chain[seg].dc_count = tcount;
addr += tcount;
count -= tcount;
if (flags & DMAGO_LWORD)
tcount >>= 2;
else if (flags & DMAGO_WORD)
tcount >>= 1;
/*
* Try to compact the DMA transfer if the pages are adjacent.
* Note: this will never happen on the first iteration.
*/
if (dc->dm_chain[seg].dc_addr == dmaend
#if defined(HP320)
/* only 16-bit count on 98620B */
&& (sc->sc_type != DMA_B ||
dc->dm_chain[seg - 1].dc_count + tcount <= 65536)
#endif
) {
#ifdef DEBUG
dmahits[unit]++;
#endif
dmaend += dc->dm_chain[seg].dc_count;
dc->dm_chain[--seg].dc_count += tcount;
} else {
#ifdef DEBUG
dmamisses[unit]++;
#endif
dmaend = dc->dm_chain[seg].dc_addr +
dc->dm_chain[seg].dc_count;
dc->dm_chain[seg].dc_count = tcount;
}
}
dc->dm_cur = 0;
dc->dm_last = --seg;
dc->dm_flags = 0;
/*
* Set up the command word based on flags
*/
dc->dm_cmd = DMA_ENAB | DMA_IPL(sc->sc_isr.isr_ipl) | DMA_START;
if ((flags & DMAGO_READ) == 0)
dc->dm_cmd |= DMA_WRT;
if (flags & DMAGO_LWORD)
dc->dm_cmd |= DMA_LWORD;
else if (flags & DMAGO_WORD)
dc->dm_cmd |= DMA_WORD;
if (flags & DMAGO_PRI)
dc->dm_cmd |= DMA_PRI;
if (flags & DMAGO_READ) {
#if defined(M68040)
/*
* On the 68040 we need to flush (push) the data cache before a
* DMA (already done above) and flush again after DMA completes.
* In theory we should only need to flush prior to a write DMA
* and purge after a read DMA but if the entire page is not
* involved in the DMA we might purge some valid data.
*/
if (mmutype == MMU_68040)
dc->dm_flags |= DMAF_PCFLUSH;
#endif
#if defined(CACHE_HAVE_PAC)
/*
* Remember if we need to flush external physical cache when
* DMA is done. We only do this if we are reading
* (writing memory).
*/
if (ectype == EC_PHYS)
dc->dm_flags |= DMAF_PCFLUSH;
#endif
#if defined(CACHE_HAVE_VAC)
if (ectype == EC_VIRT)
dc->dm_flags |= DMAF_VCFLUSH;
#endif
}
/*
* Remember if we can skip the dma completion interrupt on
* the last segment in the chain.
*/
if (flags & DMAGO_NOINT) {
if (dc->dm_cur == dc->dm_last)
dc->dm_cmd &= ~DMA_ENAB;
else
dc->dm_flags |= DMAF_NOINTR;
}
#ifdef DEBUG
if (dmadebug & DDB_IO) {
if (((dmadebug&DDB_WORD) && (dc->dm_cmd&DMA_WORD)) ||
((dmadebug&DDB_LWORD) && (dc->dm_cmd&DMA_LWORD))) {
printf("dmago: cmd %x, flags %x\n",
dc->dm_cmd, dc->dm_flags);
for (seg = 0; seg <= dc->dm_last; seg++)
printf(" %d: %d@%p\n", seg,
dc->dm_chain[seg].dc_count,
dc->dm_chain[seg].dc_addr);
}
}
dmatimo[unit] = 1;
#endif
DMA_ARM(sc, dc);
}
void
dmastop(int unit)
{
struct dma_softc *sc = &dma_softc;
struct dma_channel *dc = &sc->sc_chan[unit];
#ifdef DEBUG
if (dmadebug & DDB_FOLLOW)
printf("dmastop(%d)\n", unit);
dmatimo[unit] = 0;
#endif
DMA_CLEAR(dc);
dmacflush(dc);
/*
* We may get this interrupt after a device service routine
* has freed the dma channel. So, ignore the intr if there's
* nothing on the queue.
*/
if (dc->dm_job != NULL)
(*dc->dm_job->dq_done)(dc->dm_job->dq_softc);
}
int
dmaintr(void *arg)
{
struct dma_softc *sc = arg;
struct dma_channel *dc;
int i, stat;
int found = 0;
#ifdef DEBUG
if (dmadebug & DDB_FOLLOW)
printf("dmaintr\n");
#endif
for (i = 0; i < NDMACHAN; i++) {
dc = &sc->sc_chan[i];
stat = DMA_STAT(dc);
if ((stat & DMA_INTR) == 0)
continue;
found++;
#ifdef DEBUG
if (dmadebug & DDB_IO) {
if (((dmadebug&DDB_WORD) && (dc->dm_cmd&DMA_WORD)) ||
((dmadebug&DDB_LWORD) && (dc->dm_cmd&DMA_LWORD)))
printf("dmaintr: flags %x unit %d stat %x next %d\n",
dc->dm_flags, i, stat, dc->dm_cur + 1);
}
if (stat & DMA_ARMED)
printf("dma channel %d: intr when armed\n", i);
#endif
/*
* Load the next segment, or finish up if we're done.
*/
dc->dm_cur++;
if (dc->dm_cur <= dc->dm_last) {
#ifdef DEBUG
dmatimo[i] = 1;
#endif
/*
* If we're the last segment, disable the
* completion interrupt, if necessary.
*/
if (dc->dm_cur == dc->dm_last &&
(dc->dm_flags & DMAF_NOINTR))
dc->dm_cmd &= ~DMA_ENAB;
DMA_CLEAR(dc);
DMA_ARM(sc, dc);
} else
dmastop(i);
}
return(found);
}
#ifdef DEBUG
void
dmatimeout(void *arg)
{
int i, s;
struct dma_softc *sc = arg;
for (i = 0; i < NDMACHAN; i++) {
s = splbio();
if (dmatimo[i]) {
if (dmatimo[i] > 1)
printf("dma channel %d timeout #%d\n",
i, dmatimo[i]-1);
dmatimo[i]++;
}
splx(s);
}
timeout_add(&sc->sc_timeout, 30 * hz);
}
#endif