File: [local] / sys / arch / armish / dev / i80321_mainbus.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:08:53 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: i80321_mainbus.c,v 1.10 2006/09/15 23:36:11 drahn Exp $ */
/* $NetBSD: i80321_mainbus.c,v 1.16 2005/12/15 01:44:00 briggs Exp $ */
/*
* Copyright (c) 2001, 2002 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* IQ80321 front-end for the i80321 I/O Processor. We take care
* of setting up the i80321 memory map, PCI interrupt routing, etc.,
* which are all specific to the board the i80321 is wired up to.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/gpio.h>
#include <machine/bus.h>
#include <arm/mainbus/mainbus.h>
#include <armish/dev/iq80321reg.h>
#include <armish/dev/iq80321var.h>
#include <arm/xscale/i80321reg.h>
#include <arm/xscale/i80321var.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/gpio/gpiovar.h>
#include "gpio.h"
int i80321_mainbus_match(struct device *, void *, void *);
void i80321_mainbus_attach(struct device *, struct device *, void *);
void i80321_gpio_init (struct i80321_softc *sc);
int i80321_gpio_pin_read (void *, int);
void i80321_gpio_pin_write (void *, int, int);
void i80321_gpio_pin_ctl (void *, int, int);
/* XXX */
#define I80219_REG_GPOE 0x7C4
#define I80219_REG_GPID 0x7C8
#define I80219_REG_GPOD 0x7CC
struct cfattach iopxs_mainbus_ca = {
sizeof(struct i80321_softc), i80321_mainbus_match,
i80321_mainbus_attach
};
struct cfdriver iopxs_cd = {
NULL, "iopxs", DV_DULL
};
/* There can be only one. */
int i80321_mainbus_found;
int
i80321_mainbus_match(struct device *parent, void *match, void *aux)
{
struct mainbus_attach_args *ma = aux;
struct cfdata *cf = match;
if (i80321_mainbus_found)
return (0);
if (strcmp(cf->cf_driver->cd_name, ma->ma_name) == 0)
return (1);
return (0);
}
/* XXX */
bus_space_handle_t sc_pld_sh;
void
i80321_mainbus_attach(struct device *parent, struct device *self, void *aux)
{
struct i80321_softc *sc = (void *) self;
struct gpiobus_attach_args gba;
pcireg_t b0u, b0l, b1u, b1l;
paddr_t memstart;
psize_t memsize;
pcireg_t atumembase;
pcireg_t atuiobase;
i80321_mainbus_found = 1;
/*
* Fill in the space tag for the i80321's own devices,
* and hand-craft the space handle for it (the device
* was mapped during early bootstrap).
*/
i80321_bs_init(&i80321_bs_tag, sc);
sc->sc_st = &i80321_bs_tag;
if (bus_space_map(sc->sc_st, VERDE_PMMR_BASE, VERDE_PMMR_SIZE, 0,
&sc->sc_sh))
panic("%s: unable to map VERDE registers", sc->sc_dev.dv_xname);
/*
* Slice off a subregion for the Memory Controller -- we need it
* here in order read the memory size.
*/
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_MCU_BASE,
VERDE_MCU_SIZE, &sc->sc_mcu_sh))
panic("%s: unable to subregion MCU registers",
sc->sc_dev.dv_xname);
if (bus_space_subregion(sc->sc_st, sc->sc_sh, VERDE_ATU_BASE,
VERDE_ATU_SIZE, &sc->sc_atu_sh))
panic("%s: unable to subregion ATU registers",
sc->sc_dev.dv_xname);
if(bus_space_map(sc->sc_st, VERDE_OUT_XLATE_IO_WIN0_BASE,
VERDE_OUT_XLATE_IO_WIN_SIZE, 0, &sc->sc_io_sh))
panic("%s: unable to map IOW registers", sc->sc_dev.dv_xname);
// printf ("PIRSR %x\n", bus_space_read_4(sc->sc_st, sc->sc_sh, ICU_PIRSR));
// printf("mapping bus io to %x - %x\n", sc->sc_io_sh, sc->sc_io_sh+VERDE_OUT_XLATE_IO_WIN_SIZE);
/*
* Initialize the interrupt part of our PCI chipset tag.
*/
iq80321_pci_init(&sc->sc_pci_chipset, sc);
/* Initialize the PCI chipset tag. */
i80321_pci_init(&sc->sc_pci_chipset, sc);
iq80321_pci_init2(&sc->sc_pci_chipset, sc);
atumembase = bus_space_read_4(sc->sc_st, sc->sc_atu_sh,
PCI_MAPREG_START + 0x08);
atuiobase = bus_space_read_4(sc->sc_st, sc->sc_atu_sh,
ATU_OIOWTVR);
sc->sc_membus_space.bus_base = PCI_MAPREG_MEM_ADDR(atumembase);
sc->sc_membus_space.bus_size = 0x04000000;
sc->sc_iobus_space.bus_base = PCI_MAPREG_IO_ADDR(atuiobase);
sc->sc_iobus_space.bus_size = 0x00010000;
pci_addr_fixup(sc, 2/*XXX*/);
/*
* Check the configuration of the ATU to see if another BIOS
* has configured us. If a PC BIOS didn't configure us, then:
* IQ80321: BAR0 00000000.0000000c BAR1 is 00000000.8000000c.
* IQ31244: BAR0 00000000.00000004 BAR1 is 00000000.0000000c.
* If a BIOS has configured us, at least one of those should be
* different. This is pretty fragile, but it's not clear what
* would work better.
*/
b0l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x0);
b0u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x4);
b1l = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0x8);
b1u = bus_space_read_4(sc->sc_st, sc->sc_atu_sh, PCI_MAPREG_START+0xc);
b0l &= PCI_MAPREG_MEM_ADDR_MASK;
b0u &= PCI_MAPREG_MEM_ADDR_MASK;
b1l &= PCI_MAPREG_MEM_ADDR_MASK;
b1u &= PCI_MAPREG_MEM_ADDR_MASK;
printf(": i80321 I/O Processor\n");
i80321_sdram_bounds(sc->sc_st, sc->sc_mcu_sh, &memstart, &memsize);
/*
* We set up the Inbound Windows as follows:
*
* 0 Access to i80321 PMMRs
*
* 1 Reserve space for private devices
*
* 2 RAM access
*
* 3 Unused.
*
* This chunk needs to be customized for each IOP321 application.
*/
atumembase = bus_space_read_4(sc->sc_st, sc->sc_atu_sh,
PCI_MAPREG_START + 0x08);
if (atumembase == 0x8000000c) {
/* iodata: intel std config */
/* map device registers */
sc->sc_iwin[0].iwin_base_lo = 0x00000004;
sc->sc_iwin[0].iwin_base_hi = 0x00000000;
sc->sc_iwin[0].iwin_xlate = 0xff000000;
sc->sc_iwin[0].iwin_size = 0x01000000;
/* Map PCI:Local 1:1. */
sc->sc_iwin[1].iwin_base_lo = VERDE_OUT_XLATE_MEM_WIN0_BASE |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[1].iwin_base_hi = 0;
sc->sc_iwin[1].iwin_xlate = VERDE_OUT_XLATE_MEM_WIN0_BASE;
sc->sc_iwin[1].iwin_size = VERDE_OUT_XLATE_MEM_WIN_SIZE;
sc->sc_iwin[2].iwin_base_lo = memstart |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[2].iwin_base_hi = 0;
sc->sc_iwin[2].iwin_xlate = memstart;
sc->sc_iwin[2].iwin_size = memsize;
sc->sc_iwin[3].iwin_base_lo = 0;
#if 0
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
#endif
sc->sc_iwin[3].iwin_base_hi = 0;
sc->sc_iwin[3].iwin_xlate = 0;
sc->sc_iwin[3].iwin_size = 0;
/*
* We set up the Outbound Windows as follows:
*
* 0 Access to private PCI space.
*
* 1 Unused.
*/
sc->sc_owin[0].owin_xlate_lo =
PCI_MAPREG_MEM_ADDR(sc->sc_iwin[1].iwin_base_lo);
sc->sc_owin[0].owin_xlate_hi = sc->sc_iwin[1].iwin_base_hi;
/*
* Set the Secondary Outbound I/O window to map
* to PCI address 0 for all 64K of the I/O space.
*/
sc->sc_ioout_xlate = 0x90000000;
sc->sc_ioout_xlate_offset = 0x1000;
} else if (atumembase == 0x40000004) {
/* thecus */
/* dont map device registers */
sc->sc_iwin[0].iwin_base_lo = 0;
sc->sc_iwin[0].iwin_base_hi = 0;
sc->sc_iwin[0].iwin_xlate = 0;
sc->sc_iwin[0].iwin_size = 0;
/* Map PCI:Local 1:1. */
sc->sc_iwin[1].iwin_base_lo = 0x40000000 |
#if 0
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
#else
0;
#endif
sc->sc_iwin[1].iwin_base_hi = 0;
sc->sc_iwin[1].iwin_xlate = 0;
sc->sc_iwin[1].iwin_size = 0x08000000;
sc->sc_iwin[2].iwin_base_lo = 0 |
PCI_MAPREG_MEM_PREFETCHABLE_MASK |
PCI_MAPREG_MEM_TYPE_64BIT;
sc->sc_iwin[2].iwin_base_hi = 0;
sc->sc_iwin[2].iwin_xlate = memstart;
sc->sc_iwin[2].iwin_size = memsize;
sc->sc_iwin[3].iwin_base_lo = 0;
sc->sc_iwin[3].iwin_base_hi = 0;
sc->sc_iwin[3].iwin_xlate = 0;
sc->sc_iwin[3].iwin_size = 0;
/*
* We set up the Outbound Windows as follows:
*
* 0 Access to private PCI space.
*
* 1 Unused.
*/
sc->sc_owin[0].owin_xlate_lo =
PCI_MAPREG_MEM_ADDR(sc->sc_iwin[1].iwin_base_lo);
sc->sc_owin[0].owin_xlate_hi = sc->sc_iwin[1].iwin_base_hi;
/*
* Set the Secondary Outbound I/O window to map
* to PCI address 0 for all 64K of the I/O space.
*/
sc->sc_ioout_xlate = 0x90000000;
sc->sc_ioout_xlate_offset = 0x1000;
}
i80321_attach(sc);
i80321_gpio_init (sc);
/* if 80219 */ {
gba.gba_name = "gpio";
gba.gba_gc = &sc->sc_gpio_gc;
gba.gba_pins = sc->sc_gpio_pins;
gba.gba_npins = I80219_GPIO_NPINS;
#if NGPIO > 0
config_found(&sc->sc_dev, &gba, gpiobus_print);
#endif
}
{
#define I80321_PLD 0xfe8d0000UL
#define I80321_PLD_SIZE 0x1000
#define PLD_LED 0
#define PLD_PLED 1
#define PLD_BTN 2
#define PLD_INTEN 3
#define PLD_PWRMNG 4
#if 0
uint8_t val;
#endif
if (bus_space_map(sc->sc_st, I80321_PLD, I80321_PLD_SIZE, 0,
/* &sc->sc_pld_sh */ &sc_pld_sh))
panic("%s: unable to map PLD registers",
sc->sc_dev.dv_xname);
#if 0
printf("dlectl %x\n", bus_space_read_1(sc->sc_st, sc_pld_sh,
PLD_LED));
val = bus_space_read_1(sc->sc_st, sc_pld_sh, PLD_LED);
val |= 0x3;
bus_space_write_1(sc->sc_st, sc_pld_sh, PLD_LED, val);
printf("dlectl %x\n", bus_space_read_1(sc->sc_st, sc_pld_sh,
PLD_PLED));
printf("dlectl %x\n", bus_space_read_1(sc->sc_st, sc_pld_sh,
PLD_BTN));
#endif
}
{
extern struct cfdriver pcaled_cd;
void pcaled_gpio_pin_write(void *arg, int pin, int value);
if (pcaled_cd.cd_ndevs > 0 && pcaled_cd.cd_devs[0] != NULL) {
pcaled_gpio_pin_write(pcaled_cd.cd_devs[0], 13, 0);
pcaled_gpio_pin_write(pcaled_cd.cd_devs[0], 14, 0);
}
}
}
void
i80321_gpio_init (struct i80321_softc *sc)
{
int i;
for (i = 0; i < I80219_GPIO_NPINS; i++) {
sc->sc_gpio_pins[i].pin_num = i;
sc->sc_gpio_pins[i].pin_caps = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
sc->sc_gpio_pins[i].pin_flags =
bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOE) &
(1 << i) ? GPIO_PIN_INPUT : GPIO_PIN_OUTPUT;
sc->sc_gpio_pins[i].pin_state = i80321_gpio_pin_read(sc, i) ?
GPIO_PIN_HIGH : GPIO_PIN_LOW;
}
sc->sc_gpio_gc.gp_cookie = sc;
sc->sc_gpio_gc.gp_pin_read = i80321_gpio_pin_read;
sc->sc_gpio_gc.gp_pin_write = i80321_gpio_pin_write;
sc->sc_gpio_gc.gp_pin_ctl = i80321_gpio_pin_ctl;
}
int
i80321_gpio_pin_read (void *arg, int pin)
{
struct i80321_softc *sc = arg;
u_int32_t regval;
int reg;
if (bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOE)
& (1 << pin)) {
reg = I80219_REG_GPID;
} else {
reg = I80219_REG_GPOD;
}
regval = bus_space_read_4(sc->sc_st, sc->sc_sh, reg);
#if 0
printf("read %x gpio %x\n", reg);
printf("gpio state %x %x %x\n",
bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPID),
bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOD),
bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOE));
#endif
return ((regval >> pin) & 1);
}
void
i80321_gpio_pin_write (void *arg, int pin, int value)
{
struct i80321_softc *sc = arg;
u_int32_t regval;
regval = bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOD);
regval = (regval & ~(1 << pin)) | ((value & 1) << pin);
#if 0
printf("writing %x to gpioO %x\n", regval);
#endif
bus_space_write_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOD, regval);
}
void
i80321_gpio_pin_ctl (void *arg, int pin, int flags)
{
struct i80321_softc *sc = arg;
u_int32_t regval;
int value = (flags == GPIO_PIN_INPUT) ? 1 : 0;
regval = bus_space_read_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOE);
regval = (regval & ~(1 << pin)) | ((value & 1) << pin);
#if 0
printf("writing %x to ctl %x\n", regval, value);
#endif
bus_space_write_4(sc->sc_st, sc->sc_sh, I80219_REG_GPOE, regval);
}
void board_reset(void); /* XXX */
void
board_reset()
{
struct i80321_softc *sc = i80321_softc;
uint32_t val;
printf("attempting reset\n");
val = bus_space_read_4(sc->sc_st, sc->sc_sh, 0x7CC);
val &= ~0x10;
bus_space_write_4(sc->sc_st, sc->sc_sh, 0x7CC, val);
val = bus_space_read_4(sc->sc_st, sc->sc_sh, 0x7C4);
val &= ~0x10;
bus_space_write_4(sc->sc_st, sc->sc_sh, 0x7C4, val);
bus_space_write_1(sc->sc_st, sc_pld_sh, PLD_PWRMNG, 0x2);
}
void board_powerdown(void); /* XXX */
void
board_powerdown(void)
{
void pcaled_gpio_pin_write(void *arg, int pin, int value);
extern struct cfdriver pcaled_cd;
if (pcaled_cd.cd_ndevs > 0 && pcaled_cd.cd_devs[0] != NULL) {
pcaled_gpio_pin_write(pcaled_cd.cd_devs[0], 8, 1);
delay(500000);
}
}