File: [local] / sys / arch / arm / xscale / pxa2x0_lcd.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:21 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: pxa2x0_lcd.h,v 1.11 2005/12/22 18:45:46 deraadt Exp $ */
/* $NetBSD: pxa2x0_lcd.h,v 1.2 2003/06/17 09:43:14 bsh Exp $ */
/*
* Copyright (c) 2002 Genetec Corporation. All rights reserved.
* Written by Hiroyuki Bessho for Genetec Corporation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Genetec Corporation.
* 4. The name of Genetec Corporation may not be used to endorse or
* promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ARM_XSCALE_PXA2X0_LCD_H
#define _ARM_XSCALE_PXA2X0_LCD_H
#include <dev/rasops/rasops.h>
#include <machine/bus.h>
/* LCD Controller */
struct lcd_dma_descriptor {
uint32_t fdadr; /* next frame descriptor */
uint32_t fsadr; /* frame start address */
uint32_t fidr; /* frame ID */
uint32_t ldcmd; /* DMA command */
#define LDCMD_PAL (1U<<26) /* Palette buffer */
#define LDCMD_SOFINT (1U<<22) /* Start of Frame interrupt */
#define LDCMD_EOFINT (1U<<21) /* End of Frame interrupt */
};
struct pxa2x0_lcd_screen {
LIST_ENTRY(pxa2x0_lcd_screen) link;
/* Frame buffer */
bus_dmamap_t dma;
bus_dma_segment_t segs[1];
int nsegs;
size_t buf_size;
size_t map_size;
void *buf_va;
int depth;
/* DMA frame descriptor */
struct lcd_dma_descriptor *dma_desc;
paddr_t dma_desc_pa;
/* rasterop */
struct rasops_info rinfo;
};
struct pxa2x0_lcd_softc {
struct device dev;
/* control register */
bus_space_tag_t iot;
bus_space_handle_t ioh;
bus_dma_tag_t dma_tag;
const struct lcd_panel_geometry *geometry;
int n_screens;
LIST_HEAD(, pxa2x0_lcd_screen) screens;
struct pxa2x0_lcd_screen *active;
void *ih; /* interrupt handler */
};
struct lcd_panel_geometry {
short panel_width;
short panel_height;
short extra_lines;
short panel_info;
#define LCDPANEL_VSP (1<<0) /* L_FCLK pin is active low */
#define LCDPANEL_HSP (1<<1) /* L_LCLK pin is active low */
#define LCDPANEL_PCP (1<<2) /* use L_PCLK falling edge */
#define LCDPANEL_OEP (1<<3) /* L_BIAS pin is active low */
#define LCDPANEL_DPC (1<<4) /* double pixel clock mode */
#define LCDPANEL_DUAL (1<<5) /* Dual or single */
#define LCDPANEL_SINGLE 0
#define LCDPANEL_ACTIVE (1<<6) /* Active or Passive */
#define LCDPANEL_PASSIVE 0
#define LCDPANEL_MONOCHROME (1<<7) /* depth=1 */
short pixel_clock_div; /* pixel clock divider */
short ac_bias; /* AC bias pin frequency */
short hsync_pulse_width; /* Horizontal sync pulse width */
short beg_line_wait; /* beginning of line wait (BLW) */
short end_line_wait; /* end of line pxel wait (ELW) */
short vsync_pulse_width; /* vertical sync pulse width */
short beg_frame_wait; /* beginning of frame wait (BFW) */
short end_frame_wait; /* end of frame wait (EFW) */
};
/*
* we need bits-per-pixel value to configure wsdisplay screen
*/
struct pxa2x0_wsscreen_descr {
struct wsscreen_descr c; /* standard descriptor */
int depth; /* bits per pixel */
int flags; /* rasops flags */
};
void pxa2x0_lcd_attach_sub(struct pxa2x0_lcd_softc *,
struct pxaip_attach_args *, struct pxa2x0_wsscreen_descr *,
const struct lcd_panel_geometry *, int);
int pxa2x0_lcd_cnattach(struct pxa2x0_wsscreen_descr *,
const struct lcd_panel_geometry *, void (*)(u_int, int));
int pxa2x0_lcd_alloc_screen(void *, const struct wsscreen_descr *,
void **, int *, int *, long *);
void pxa2x0_lcd_free_screen(void *, void *);
int pxa2x0_lcd_ioctl(void *, u_long, caddr_t, int, struct proc *);
paddr_t pxa2x0_lcd_mmap(void *, off_t, int);
int pxa2x0_lcd_show_screen(void *, void *, int, void (*)(void *, int, int),
void *);
void pxa2x0_lcd_power(int, void *);
void pxa2x0_lcd_suspend(struct pxa2x0_lcd_softc *);
void pxa2x0_lcd_resume(struct pxa2x0_lcd_softc *);
#endif /* _ARM_XSCALE_PXA2X0_LCD_H */