File: [local] / sys / arch / arm / xscale / pxa2x0_com.c (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:19 2008 UTC (16 years, 5 months ago) by nbrk
Branch: OPENBSD_4_2_BASE, MAIN
CVS Tags: jornada-partial-support-wip, HEAD Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $OpenBSD: pxa2x0_com.c,v 1.7 2005/07/18 00:50:19 uwe Exp $ */
/* $NetBSD: pxa2x0_com.c,v 1.4 2003/07/15 00:24:55 lukem Exp $ */
/*
* Copyright 2003 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Steve C. Woodford for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
/*
__KERNEL_RCSID(0, "$NetBSD: pxa2x0_com.c,v 1.4 2003/07/15 00:24:55 lukem Exp $");
*/
#ifndef COM_PXA2X0
#error "You must use options COM_PXA2X0 to get PXA2x0 serial port support"
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/tty.h>
#include <machine/intr.h>
#include <machine/bus.h>
#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>
#define com_isr 8
#define ISR_RECV (ISR_RXPL | ISR_XMODE | ISR_RCVEIR)
#include <arm/xscale/pxa2x0reg.h>
#include <arm/xscale/pxa2x0var.h>
#ifdef __zaurus__
#include <zaurus/dev/zaurus_scoopvar.h>
#endif
int pxauart_match(struct device *, void *, void *);
void pxauart_attach(struct device *, struct device *, void *);
void pxauart_power(int why, void *);
struct cfattach com_pxaip_ca = {
sizeof (struct com_softc), pxauart_match, pxauart_attach
};
int
pxauart_match(struct device *parent, void *cf, void *aux)
{
struct pxaip_attach_args *pxa = aux;
bus_space_tag_t bt = &pxa2x0_a4x_bs_tag; /* XXX: This sucks */
bus_space_handle_t bh;
int rv;
switch (pxa->pxa_addr) {
case PXA2X0_FFUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_FFUART)
return (0);
break;
case PXA2X0_STUART_BASE:
if (pxa->pxa_intr != PXA2X0_INT_STUART)
return (0);
break;
case PXA2X0_BTUART_BASE: /* XXX: Config file option ... */
if (pxa->pxa_intr != PXA2X0_INT_BTUART)
return (0);
break;
default:
return (0);
}
pxa->pxa_size = 0x20;
{
extern bus_addr_t comconsaddr;
if (comconsaddr == pxa->pxa_addr)
return (1);
}
if (bus_space_map(bt, pxa->pxa_addr, pxa->pxa_size, 0, &bh))
return (0);
/* Make sure the UART is enabled */
bus_space_write_1(bt, bh, com_ier, IER_EUART);
rv = comprobe1(bt, bh);
bus_space_unmap(bt, bh, pxa->pxa_size);
return (rv);
}
void
pxauart_attach(struct device *parent, struct device *self, void *aux)
{
struct com_softc *sc = (struct com_softc *)self;
struct pxaip_attach_args *pxa = aux;
sc->sc_iot = &pxa2x0_a4x_bs_tag; /* XXX: This sucks */
sc->sc_iobase = pxa->pxa_addr;
sc->sc_frequency = PXA2X0_COM_FREQ;
sc->sc_uarttype = COM_UART_PXA2X0;
#if 0
if (com_is_console(sc->sc_iot, sc->sc_iobase, &sc->sc_ioh) == 0 &&
bus_space_map(sc->sc_iot, sc->sc_iobase, pxa->pxa_size, 0,
&sc->sc_ioh)) {
printf(": can't map registers\n");
return;
}
#endif
bus_space_map(sc->sc_iot, sc->sc_iobase, pxa->pxa_size, 0, &sc->sc_ioh);
com_attach_subr(sc);
(void)pxa2x0_intr_establish(pxa->pxa_intr, IPL_TTY, comintr,
sc, sc->sc_dev.dv_xname);
(void)powerhook_establish(&pxauart_power, sc);
}
void
pxauart_power(int why, void *arg)
{
struct com_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct tty *tp = sc->sc_tty;
switch (why) {
case PWR_SUSPEND:
case PWR_STANDBY:
if (sc->enabled && ISSET(sc->sc_hwflags, COM_HW_SIR))
scoop_set_irled(0);
break;
case PWR_RESUME:
if (sc->enabled) {
sc->sc_initialize = 1;
comparam(tp, &tp->t_termios);
bus_space_write_1(iot, ioh, com_ier, sc->sc_ier);
if (ISSET(sc->sc_hwflags, COM_HW_SIR)) {
scoop_set_irled(1);
bus_space_write_1(iot, ioh, com_isr,
ISR_RECV);
}
}
break;
}
}