File: [local] / sys / arch / arm / sa11x0 / sa11xx_pcicvar.h (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:05:17 2008 UTC (16 years, 6 months ago) by nbrk
Branch: OPENBSD_4_2_BASE
CVS Tags: jornada-partial-support-wip Changes since 1.1: +0 -0 lines
Import of OpenBSD 4.2 release kernel tree with initial code to support
Jornada 720/728, StrongARM 1110-based handheld PC.
At this point kernel roots on NFS and boots into vfs_mountroot() and traps.
What is supported:
- glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode
(needs some palette tweaks for non black/white/blue colors, i think)
- saic, SA11x0 interrupt controller (needs cleanup)
- sacom, SA11x0 UART (supported only as boot console for now)
- SA11x0 GPIO controller fully supported (but can't handle multiple interrupt
handlers on one gpio pin)
- sassp, SSP port on SA11x0 that attaches spibus
- Jornada microcontroller (jmcu) to control kbd, battery, etc throught
the SPI bus (wskbd attaches on jmcu, but not tested)
- tod functions seem work
- initial code for SA-1111 (chip companion) : this is TODO
Next important steps, i think:
- gpio and intc on sa1111
- pcmcia support for sa11x0 (and sa1111 help logic)
- REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs)
- root on wd0! (using already supported PCMCIA-ATA)
|
/* $Id */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by IWAMOTO Toshihiro.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
struct sapcic_socket {
struct sapcic_softc *sc;
int socket; /* socket number */
struct device *pcmcia;
struct sapcic_tag *pcictag;
// struct lwp *event_thread;
int event;
int laststatus;
int shutdown;
int power_capability;
void *pcictag_cookie; /* opaque data for pcictag functions */
};
struct sapcic_tag {
int (*read)(struct sapcic_socket *, int);
void (*write)(struct sapcic_socket *, int, int);
void (*set_power)(struct sapcic_socket *, int);
void (*clear_intr)(int);
void *(*intr_establish)(struct sapcic_socket *, int,
int (*)(void *), void *);
void (*intr_disestablish)(struct sapcic_socket *, void *);
};
/* registers and their values */
#define SAPCIC_STATUS_CARD 0
#define SAPCIC_CARD_VALID 1
#define SAPCIC_CARD_INVALID 0
#define SAPCIC_STATUS_VS1 1
#define SAPCIC_STATUS_VS2 2
#define SAPCIC_STATUS_READY 3
#define SAPCIC_CONTROL_RESET 8 /* assert RESET */
#define SAPCIC_CONTROL_LINEENABLE 9 /* enable control lines */
#define SAPCIC_CONTROL_WAITENABLE 10 /* enable nWAIT signal */
#define SAPCIC_CONTROL_POWERSELECT 11 /* select card voltage */
/* Voltage selection */
#define SAPCIC_POWER_OFF 0
#define SAPCIC_POWER_3V 1
#define SAPCIC_POWER_5V 2
/* common part for sacpcic_softc and sagpcic_softc */
struct sapcic_softc {
struct device sc_dev;
bus_space_tag_t sc_iot;
kmutex_t sc_lock;
};
int sapcic_intr(void *);
void sapcic_kthread_create(void *);
extern struct pcmcia_chip_functions sa11x0_pcmcia_functions;