![]() ![]() | ![]() |
File: [local] / sys / arch / alpha / stand / boot / Makefile (download)
Revision 1.1.1.1 (vendor branch), Tue Mar 4 16:04:49 2008 UTC (16 years, 5 months ago) by nbrk
Import of OpenBSD 4.2 release kernel tree with initial code to support Jornada 720/728, StrongARM 1110-based handheld PC. At this point kernel roots on NFS and boots into vfs_mountroot() and traps. What is supported: - glass console, Jornada framebuffer (jfb) works in 16bpp direct color mode (needs some palette tweaks for non black/white/blue colors, i think) - saic, SA11x0 interrupt controller (needs cleanup) - sacom, SA11x0 UART (supported only as boot console for now) - SA11x0 GPIO controller fully supported (but can't handle multiple interrupt handlers on one gpio pin) - sassp, SSP port on SA11x0 that attaches spibus - Jornada microcontroller (jmcu) to control kbd, battery, etc throught the SPI bus (wskbd attaches on jmcu, but not tested) - tod functions seem work - initial code for SA-1111 (chip companion) : this is TODO Next important steps, i think: - gpio and intc on sa1111 - pcmcia support for sa11x0 (and sa1111 help logic) - REAL root on nfs when we have PCMCIA support (we may use any of supported pccard NICs) - root on wd0! (using already supported PCMCIA-ATA) |
# $OpenBSD: Makefile,v 1.15 2005/08/10 16:58:42 todd Exp $ # $NetBSD: Makefile,v 1.17 1997/04/17 07:27:46 thorpej Exp $ S= ${.CURDIR}/../../../.. .PATH: ${.CURDIR}/.. PROG = boot SRCS = start.S boot.c loadfile.c disk.c conf.c prom.c prom_disp.S OSFpal.c SRCS+= devopen.c filesystem.c prom_swpal.S NOMAN= INSTALL_STRIP= BINMODE= 444 BOOT_RELOC = ${SECONDARY_LOAD_ADDRESS} HEADERSIZE_PROG = headersize CLEANFILES+= vers.c vers.o ${PROG}.sym ${PROG}.nosym ${HEADERSIZE_PROG} DEFNS= -DCOMPAT_UFS -DALPHA_BOOT_ELF AFLAGS += -DASSEMBLER ${DEFNS} CPPFLAGS += -I${.CURDIR}/../../../../lib/libsa -I${.CURDIR}/../.. -I${S} ${DEFNS} CFLAGS = -Os -Werror -mno-fp-regs ${PROG}.nosym: ${PROG}.sym cp ${PROG}.sym ${PROG}.nosym strip ${PROG}.nosym ${PROG}: ${PROG}.nosym #${HEADERSIZE_PROG} objcopy --output-target=binary ${PROG}.nosym ${PROG} # dd if=${PROG}.nosym of=${PROG} \ # bs=`./${HEADERSIZE_PROG} ${BOOT_RELOC} ${PROG}.nosym` skip=1 # no lint here (yet?) lint: .include <bsd.prog.mk> ### find out what to use for libkern KERN_AS= library KERNDST= ${.CURDIR}/../libkern/${__objdir} .include "${.CURDIR}/../libkern/Makefile.inc" LIBKERN= ${KERNLIB} ### find out what to use for libz Z_AS= library ZDST= ${.CURDIR}/../libz/${__objdir} .include "${.CURDIR}/../libz/Makefile.inc" LIBZ= ${ZLIB} ### find out what to use for libsa SA_AS= library SADST= ${.CURDIR}/../libsa/${__objdir} SAREL= SA_ZLIB= yes .include "${.CURDIR}/../libsa/Makefile.inc" LIBSA= ${SALIB} ${PROG}.sym: ${OBJS} ${LIBSA} ${LIBZ} ${LIBKERN} sh ${.CURDIR}/newvers.sh ${.CURDIR}/version ${COMPILE.c} vers.c ${LD} -Ttext ${BOOT_RELOC} -N -e start -o ${PROG}.sym \ ${OBJS} vers.o ${LIBSA} ${LIBZ} ${LIBSA} ${LIBKERN} size ${PROG}.sym