Annotation of prex-old/sys/arch/i386/pc/gdb_glue.c, Revision 1.1.1.1
1.1 nbrk 1: /*-
2: * Copyright (c) 2005, Kohsuke Ohtani
3: * All rights reserved.
4: *
5: * Redistribution and use in source and binary forms, with or without
6: * modification, are permitted provided that the following conditions
7: * are met:
8: * 1. Redistributions of source code must retain the above copyright
9: * notice, this list of conditions and the following disclaimer.
10: * 2. Redistributions in binary form must reproduce the above copyright
11: * notice, this list of conditions and the following disclaimer in the
12: * documentation and/or other materials provided with the distribution.
13: * 3. Neither the name of the author nor the names of any co-contributors
14: * may be used to endorse or promote products derived from this software
15: * without specific prior written permission.
16: *
17: * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20: * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27: * SUCH DAMAGE.
28: */
29:
30: /*
31: * gdb_blue.c - serial data transter routine for gdb stub
32: */
33:
34: #include <kernel.h>
35: #include <cpu.h>
36:
37: #ifdef CONFIG_GDB
38:
39: /* Serial port registers */
40: #define COM_PORT 0x3F8
41: #define RBR 0 /* 3F8 Receive buffer register. */
42: #define THR 0 /* 3F8 Transmit holding register. */
43: #define IER 1 /* 3F9 Interrupt enable register. */
44: #define FCR 2 /* 3FA FIFO control register. */
45: #define IIR 2 /* 3FA Interrupt identification register. */
46: #define LCR 3 /* 3FB Line control register. */
47: #define MCR 4 /* 3FC Modem control register. */
48: #define LSR 5 /* 3FD Line status register. */
49: #define MSR 6 /* 3FE Modem status register. */
50:
51: #define DLL 0 /* 3F8 Divisor latch LSB (LCR[7] = 1). */
52: #define DLM 1 /* 3F9 Divisor latch MSB (LCR[7] = 1). */
53:
54: int
55: serial_getchar(void)
56: {
57:
58: while (!(inb(COM_PORT + LSR) & 0x01));
59: return inb(COM_PORT + RBR);
60: }
61:
62: void
63: serial_putchar(int ch)
64: {
65:
66: while (!(inb(COM_PORT + LSR) & 0x20));
67: outb((char)ch, COM_PORT + THR);
68: }
69:
70: int
71: serial_init(void)
72: {
73:
74: if (inb(COM_PORT + LSR) == 0xFF)
75: return -1; /* Serial port is disabled */
76:
77: outb(0x00, COM_PORT + IER); /* Disable all interrupt */
78: outb(0x80, COM_PORT + LCR); /* Access baud rate */
79: outb(0x01, COM_PORT + DLL); /* Baud rate = 115200 */
80: outb(0x00, COM_PORT + DLM);
81: outb(0x03, COM_PORT + LCR); /* N, 8, 1 */
82: outb(0x03, COM_PORT + MCR); /* Ready */
83: outb(0x00, COM_PORT + FCR); /* Disable FIFO */
84: inb(COM_PORT);
85: inb(COM_PORT);
86: return 0;
87: }
88:
89: #endif /* CONFIG_GDB */
CVSweb