Annotation of ports/devel/openocd/pkg/DESCR, Revision 1.1
1.1 ! yason 1: The Open On-Chip Debugger (openocd) aims to provide debugging, in-system
! 2: programming and boundary-scan testing for embedded target devices. The
! 3: targets are interfaced using JTAG (IEEE 1149.1) compliant hardware, but
! 4: this may be extended to other connection types in the future.
! 5:
! 6: Openocd currently supports Wiggler (clones), FTDI FT2232 based JTAG
! 7: interfaces, the Amontec JTAG Accelerator, and the Gateworks GW1602. It
! 8: allows ARM7 (ARM7TDMI and ARM720t), ARM9 (ARM920t, ARM922t, ARM926ej-s,
! 9: ARM966ej-s), XScale (PXA25x, IXP42x) and Cortex-M3 (Luminary Stellaris
! 10: LM3) based cores to be debugged.
! 11:
! 12: Flash writing is supported for external CFI compatible flashes (Intel
! 13: and AMD/Spansion command set) and several internal flashes (LPC2000,
! 14: AT91SAM7, STR7x, STR9x, LM3). Preliminary support for using the
! 15: LPC3180's NAND flash controller is included.
! 16:
! 17:
! 18: On OpenBSD only parallel port connection is supported for now.
! 19:
CVSweb