Annotation of funnyos/arch/sam7s64/openocd_flash.conf, Revision 1.1
1.1 ! init 1: #
! 2: # $Id$
! 3: #
! 4:
! 5: #define our ports
! 6: telnet_port 4444
! 7: gdb_port 3333
! 8:
! 9: #commands specific to the Amontec JTAGKey
! 10: interface parport
! 11: parport_port 0x378
! 12: parport_cable wiggler
! 13: jtag_speed 0
! 14: #jtag_nsrst_delay 200
! 15: #jtag_ntrst_delay 200
! 16:
! 17: #reset_config <signals> [combination] [trst_type] [srst_type]
! 18: #reset_config srst_only srst_pulls_trst
! 19: reset_config srst_only
! 20:
! 21: #jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
! 22: jtag_device 4 0x1 0xf 0xe
! 23:
! 24: #daemon_startup <'attach'|'reset'>
! 25: daemon_startup reset
! 26:
! 27: #target <type> <endianess> <reset_mode> <jtag#> [variant]
! 28: #target arm7tdmi little run_and_init 0 arm7tdmi_r4
! 29:
! 30: target arm7tdmi little run_and_init 0 arm7tdmi_r4
! 31:
! 32: #run_and_halt_time <target#> <time_in_ms>
! 33: run_and_halt_time 0 50
! 34:
! 35: # commands below are specific to AT91sam7 Flash Programming
! 36: # ---------------------------------------------------------
! 37:
! 38: #target_script specifies the flash programming script file
! 39: target_script 0 reset ./openocd_flash.scr
! 40:
! 41: #working_area <target#> <address> <size> <'backup'|'nobackup'>
! 42: working_area 0 0x00100000 0x00010000 nobackup
! 43:
! 44: #flash bank at91sam7 0 0 0 0 <target#>
! 45: flash bank at91sam7 0 0 0 0 0
! 46:
CVSweb