Return to openocd_debug.conf CVS log | Up to [local] / funnyos / arch / sam7s64 |
File: [local] / funnyos / arch / sam7s64 / openocd_debug.conf (download)
Revision 1.1, Thu Nov 8 22:26:11 2007 UTC (16 years, 8 months ago) by init
add my configuration files for openocd so we can maintain them here; anyway i will use it anytime to test real hardware |
# # $Id: openocd_debug.conf,v 1.1 2007/11/08 22:26:11 init Exp $ # #define our ports telnet_port 4444 gdb_port 3333 #commands specific to the Amontec JTAGKey interface parport parport_port 0x378 parport_cable wiggler jtag_speed 0 #jtag_nsrst_delay 200 #jtag_ntrst_delay 200 #reset_config <signals> [combination] [trst_type] [srst_type] #reset_config srst_only srst_pulls_trst reset_config srst_only #jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction> jtag_device 4 0x1 0xf 0xe #daemon_startup <'attach'|'reset'> daemon_startup reset #target <type> <endianess> <reset_mode> <jtag#> [variant] #target arm7tdmi little run_and_init 0 arm7tdmi_r4 target arm7tdmi little run_and_init 0 arm7tdmi_r4 #run_and_halt_time <target#> <time_in_ms> run_and_halt_time 0 50 # commands below are specific to AT91sam7 Flash Programming # --------------------------------------------------------- #target_script specifies the flash programming script file #target_script 0 reset ./openocd_flash.scr #working_area <target#> <address> <size> <'backup'|'nobackup'> working_area 0 0x00100000 0x00010000 nobackup #flash bank at91sam7 0 0 0 0 <target#> flash bank at91sam7 0 0 0 0 0