Annotation of funnyos/arch/sam7s64/openocd_debug.conf, Revision 1.1
1.1 ! init 1: #
! 2: # $Id$
! 3: #
! 4: #define our ports
! 5: telnet_port 4444
! 6: gdb_port 3333
! 7:
! 8: #commands specific to the Amontec JTAGKey
! 9: interface parport
! 10: parport_port 0x378
! 11: parport_cable wiggler
! 12: jtag_speed 0
! 13: #jtag_nsrst_delay 200
! 14: #jtag_ntrst_delay 200
! 15:
! 16: #reset_config <signals> [combination] [trst_type] [srst_type]
! 17: #reset_config srst_only srst_pulls_trst
! 18: reset_config srst_only
! 19:
! 20: #jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
! 21: jtag_device 4 0x1 0xf 0xe
! 22:
! 23: #daemon_startup <'attach'|'reset'>
! 24: daemon_startup reset
! 25:
! 26: #target <type> <endianess> <reset_mode> <jtag#> [variant]
! 27: #target arm7tdmi little run_and_init 0 arm7tdmi_r4
! 28:
! 29: target arm7tdmi little run_and_init 0 arm7tdmi_r4
! 30:
! 31: #run_and_halt_time <target#> <time_in_ms>
! 32: run_and_halt_time 0 50
! 33:
! 34: # commands below are specific to AT91sam7 Flash Programming
! 35: # ---------------------------------------------------------
! 36:
! 37: #target_script specifies the flash programming script file
! 38: #target_script 0 reset ./openocd_flash.scr
! 39:
! 40: #working_area <target#> <address> <size> <'backup'|'nobackup'>
! 41: working_area 0 0x00100000 0x00010000 nobackup
! 42:
! 43: #flash bank at91sam7 0 0 0 0 <target#>
! 44: flash bank at91sam7 0 0 0 0 0
! 45:
CVSweb