===================================================================
RCS file: /cvs/funnyos/arch/sam7s64/config.c,v
retrieving revision 1.16
retrieving revision 1.19
diff -u -r1.16 -r1.19
--- funnyos/arch/sam7s64/config.c	2007/12/21 17:41:27	1.16
+++ funnyos/arch/sam7s64/config.c	2008/01/06 18:15:03	1.19
@@ -1,5 +1,5 @@
 /*
- * $Id: config.c,v 1.16 2007/12/21 17:41:27 nbrk Exp $
+ * $Id: config.c,v 1.19 2008/01/06 18:15:03 nbrk Exp $
  */
 #include <sys/types.h>
 #include <sys/device.h>
@@ -22,8 +22,9 @@
 extern struct driver gpiobtn_dr;
 extern struct driver saspi_dr;
 extern struct driver spisdmmc_dr;
+extern struct driver sdmmc_dr;
+extern struct driver gpio7seg_dr;
 
-
 extern void 	(*putchar)(char);
 extern void 	sausart_early_putchar(char ch);
 
@@ -42,9 +43,11 @@
 	{ "gpioled","sapio", 	0, 18, 			-1, 0 },
 	{ "gpiobtn","sapio", 	0, 19, 			 0,	0 /*controls gpioled/0*/},
 	{ "gpiobtn","sapio", 	0, 20, 			30,	0 /*controls gpioled/1*/},
+	{ "gpio7seg","sapio", 	0, 0, 			-1, 0 },
 //	{ "sartt",  "saapbus", 	0, 0, 			1,  0 },
 	{ "saspi",	"saapbus",	0, 0,			0,	0 },
-	{ "spisdmmc","saspi",	0, 0,			0,	0 },
+//	{ "spisdmmc","saspi",	0, 0,			0,	0 },
+//	{ "sdmmc", 	"spisdmmc", 0, 0, 			0, 	0 },
 //	{ "saaic",  "saapbus",  0, 0, 			-1, 0 },
 	{ NULL, 	NULL, 		0, 0, 			-1,  0 }
 };
@@ -65,6 +68,8 @@
 	{ "gpiobtn", &gpiobtn_dr, -1 }, 
 	{ "saspi", &saspi_dr, -1 },
 	{ "spisdmmc", &spisdmmc_dr, -1 },
+	{ "sdmmc", &sdmmc_dr, -1 },
+	{ "gpio7seg", &gpio7seg_dr, -1 },
 	{ NULL, NULL, 0 }
 };
 
@@ -142,21 +147,21 @@
 	 
 	/* initialize USART0 (we clock it in PMC above) */
 
-  *AT91C_PIOA_PDR = AT91C_PA5_RXD0 |        /* Enable RxD0 Pin */
-                    AT91C_PA6_TXD0;         /* Enalbe TxD0 Pin */
+  *AT91C_PIOA_PDR = AT91C_PA21_RXD1 |        /* Enable RxD0 Pin */
+                    AT91C_PA22_TXD1;         /* Enalbe TxD0 Pin */
 
-  *AT91C_US0_MR = AT91C_US_USMODE_NORMAL |  /* Normal Mode */
+  *AT91C_US1_MR = AT91C_US_USMODE_NORMAL |  /* Normal Mode */
                   AT91C_US_CLKS_CLOCK    |  /* Clock = MCK */
                   AT91C_US_CHRL_8_BITS   |  /* 8-bit Data  */
                   AT91C_US_PAR_NONE      |  /* No Parity   */
                   AT91C_US_NBSTOP_1_BIT;    /* 1 Stop Bit  */
 
-  *AT91C_US0_BRGR = 48054857 / 16 / 9600;                    /* Baud Rate Divisor */
+  *AT91C_US1_BRGR = 48054857 / 16 / 9600;                    /* Baud Rate Divisor */
 
   /* enable DMA transfers on USART0 */
-  *AT91C_US0_PTCR = AT91C_PDC_TXTEN | AT91C_PDC_RXTEN;
+  *AT91C_US1_PTCR = AT91C_PDC_TXTEN | AT91C_PDC_RXTEN;
 
-  *AT91C_US0_CR = AT91C_US_RXEN  |          /* Receiver Enable     */
+  *AT91C_US1_CR = AT91C_US_RXEN  |          /* Receiver Enable     */
                   AT91C_US_TXEN;            /* Transmitter Enable  */
 
 	/* redefine putchar */