===================================================================
RCS file: /cvs/funnyos/arch/sam7s64/config.c,v
retrieving revision 1.10
retrieving revision 1.11
diff -u -r1.10 -r1.11
--- funnyos/arch/sam7s64/config.c	2007/11/24 15:13:33	1.10
+++ funnyos/arch/sam7s64/config.c	2007/11/24 17:10:07	1.11
@@ -1,5 +1,5 @@
 /*
- * $Id: config.c,v 1.10 2007/11/24 15:13:33 nbrk Exp $
+ * $Id: config.c,v 1.11 2007/11/24 17:10:07 nbrk Exp $
  */
 #include <sys/types.h>
 #include <sys/device.h>
@@ -71,6 +71,9 @@
 	/* set FLASH to high-speed */
 	*AT91C_MC_FMR = AT91C_MC_FWS_0FWS;
 
+	/* enable user RESET (magic button on board) */
+	*AT91C_RSTC_RMR = AT91C_RSTC_URSTEN | AT91C_RSTC_KEY;
+
 	/*
 	 * Initialize oscillators.
 	 * Taken from Atmel's examples.
@@ -119,7 +122,8 @@
 		;
 
 	/* enable clock to PIO and USART0 */
-	*AT91C_PMC_PCER = AT91C_ID_PIOA | AT91C_ID_US0;
+	//*AT91C_PMC_PCER = AT91C_ID_PIOA | AT91C_ID_US0;
+	*AT91C_PMC_PCER = AT91C_ALL_INT;
 	 
 	*AT91C_PIOA_PER = (1 << 17 | 1 << 18);
 	*AT91C_PIOA_OER = (1 << 17 | 1 << 18);
@@ -130,11 +134,6 @@
   *AT91C_PIOA_PDR = AT91C_PA5_RXD0 |        /* Enable RxD0 Pin */
                     AT91C_PA6_TXD0;         /* Enalbe TxD0 Pin */
 
-  *AT91C_US0_CR = AT91C_US_RSTRX |          /* Reset Receiver      */
-                  AT91C_US_RSTTX |          /* Reset Transmitter   */
-                  AT91C_US_RXDIS |          /* Receiver Disable    */
-                  AT91C_US_TXDIS;           /* Transmitter Disable */
-
   *AT91C_US0_MR = AT91C_US_USMODE_NORMAL |  /* Normal Mode */
                   AT91C_US_CLKS_CLOCK    |  /* Clock = MCK */
                   AT91C_US_CHRL_8_BITS   |  /* 8-bit Data  */
@@ -151,9 +150,6 @@
 
 	/* redefine putchar */
 	putchar = sausart_early_putchar;
-//	putchar(0);
-//	putchar(0x46);
-//	putchar(0x46);
 }